Date: Thu, 15 Sep 2011 13:02:11 +0200 From: Matthias Apitz <guru@unixarea.de> To: freebsd-questions@freebsd.org Subject: ppp with mode -auto Message-ID: <20110915110211.GA1140@tiny>
next in thread | raw e-mail | index | archive | help
--ZPt4rx8FFjLCG7dd Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello, I'm using ppp(1) with mode -auto in a FreeBSD 8.x (an older 8-CURRENT); I'm reading in the man page that the link is not coming up until packages for the tun interface are arriving... But my ppp starts chatting and LCP... just when it is started. My ppp.conf file is attached; any ideas? Thanks in advance matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e <guru@unixarea.de> - w http://www.unixarea.de/ --ZPt4rx8FFjLCG7dd Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="ppp.conf" # # default: set log Phase Chat LCP IPCP CCP tun command umts: set device /dev/cuaU0.0 # device name in CURRENT set speed 230400 # set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \ \"\" AT OK-AT-OK ATZ OK \ AT+CFUN=1 OK \ AT+COPS=0 OK \ AT+CGDCONT=1,\\\"IP\\\",\\\"pinternet.interkom.de\\\" OK \ \\dATDT\\T TIMEOUT 40 CONNECT" set logout "ABORT BUSY ABORT ERROR TIMEOUT 30 \"\" +++ATH O ATH OK" set phone *99*1\# set authname "fonic" set authkey "fonic" set timeout 300 set ifaddr 0.0.0.0/0 10.64.64.64/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns disable ipv6cp --ZPt4rx8FFjLCG7dd--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110915110211.GA1140>