Date: Wed, 04 Dec 2019 08:00:15 +0900 From: KIRIYAMA Kazuhiko <kiri@truefc.org> To: freebsd-arm@freebsd.org Subject: Can't boot arm64 image by qemu-system-aarch64 Message-ID: <201912032300.xB3N0FGC061069@kx.truefc.org>
next in thread | raw e-mail | index | archive | help
Hi, all
# I've posted freebsd-virtualization,but any responces.
# Sorry for same posting.
I've installed successfully by qemu-system-aarch64 below:
root@vm:/vm/test # truncate -s 16g test.img
root@vm:/vm/test # qemu-system-aarch64 -machine virt -m 4096M -cpu cortex-a57 -name test -bios QEMU_EFI.fd -nographic -hda test.img -hdc FreeBSD-13.0-CURRENT-arm64-aarch64-20191127-r355121-memstick.img
and rebooted successfully and login with root:
root@test:~ # uname -a
FreeBSD test.tfc 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r355121: Wed Nov 27 03:49:21 UTC 2019 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
root@test:~ # df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/vtbd0p2 14G 1.3G 12G 10% /
devfs 1.0K 1.0K 0B 100% /dev
root@test:~ # ifconfig
vtnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE>
ether 52:54:00:12:34:56
inet 192.168.1.196 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet 10Gbase-T <full-duplex>
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@test:~ #
So, I shutdowned and run by qemu-system-aarch64:
root@vm:/vm/test # qemu-system-aarch64 -machine virt -m 4096M -cpu cortex-a57 -name test -bios QEMU_EFI.fd -nographic -drive if=none,format=raw,file=test.img,id=hd0 -device virtio-blk-device,drive=hd0 -device virtio-net-device,netdev=net0 -netdev tap,id=net0,ifname=tap2
But failed to boot:
BdsDxe: failed to load Boot0001 "UEFI Misc Device" from VenHw(93E34C7E-B50E-11DF-9223-2443DFD72085,00): Not Found
BdsDxe: failed to load Boot0002 "UEFI Misc Device 2" from VenHw(837DCA9E-E874-4D82-B29A-23FE0E23D1E2,003E000A00000000): Not Found
>>Start PXE over IPv4.
where, tap2 is ready to use:
root@vm:/vm/test # ifconfig tap2
tap2: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: vmnet-test-0-local
options=80000<LINKSTATE>
ether 58:9c:fc:10:ec:02
groups: tap qemu-port
media: Ethernet autoselect
status: no carrier
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@vm:/vm/test #
What's wrong ?
Best regards.
---
Kiriyama Kazuhiko <kiri@truefc.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201912032300.xB3N0FGC061069>