Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 5 Jun 2000 16:09:43 +0200 (CEST)
From:      Fritz Heinrichmeyer <jfh@es-i2.fernuni-hagen.de>
To:        FreeBSD-gnats-submit@freebsd.org
Subject:   kern/19020: spontaneous reboots with SMP kernel from 4.Juni.2000
Message-ID:  <200006051409.QAA05518@es-i2.fernuni-hagen.de>

next in thread | raw e-mail | index | archive | help

>Number:         19020
>Category:       kern
>Synopsis:       kernel reboots sometimes
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon Jun 05 07:10:00 PDT 2000
>Closed-Date:
>Last-Modified:
>Originator:     Fritz Heinrichmeyer
>Release:        FreeBSD 4.0-STABLE i386
>Organization:
Fernuni Hagen
>Environment:

What follows is output of mptable -dmesg:

===============================================================================

MPTable, version 2.0.15

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000fb8b0
  signature:			'_MP_'
  length:			16 bytes
  version:			1.1
  checksum:			0x0a
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x000f7a10
  signature:			'PCMP'
  base table length:		284
  version:			1.1
  checksum:			0x6f
  OEM ID:			'INTEL   '
  Product ID:			'440FX       '
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			27
  local APIC address:		0xfee00000
  extended table length:	0
  extended table checksum:	0

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 1	 0x11	 BSP, usable	 6	 3	 3	 0x80fbff
		 0	 0x11	 AP, usable	 6	 3	 3	 0x80fbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 2	 0x11	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	 conforms    conforms	     1	   0	      2	   0
		INT	 conforms    conforms	     1	   1	      2	   1
		INT	 conforms    conforms	     1	   0	      2	   2
		INT	 conforms    conforms	     1	   3	      2	   3
		INT	 conforms    conforms	     1	   4	      2	   4
		INT	 conforms    conforms	     1	   5	      2	   5
		INT	 conforms    conforms	     1	   6	      2	   6
		INT	 conforms    conforms	     1	   7	      2	   7
		INT	active-hi        edge	     1	   8	      2	   8
		INT	 conforms    conforms	     1	   9	      2	   9
		INT	 conforms    conforms	     1	  10	      2	  10
		INT	 conforms    conforms	     1	  11	      2	  11
		INT	 conforms    conforms	     1	  12	      2	  12
		INT	 conforms    conforms	     1	  13	      2	  13
		INT	 conforms    conforms	     1	  14	      2	  14
		INT	 conforms    conforms	     1	  15	      2	  15
		INT	active-lo       level	     0	14:A	      2	  16
		INT	active-lo       level	     0	10:A	      2	  16
		INT	active-lo       level	     0	11:A	      2	  19
		SMI	 conforms    conforms	     1	   0	      2	  23
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	 conforms    conforms	     0	 0:A	    255	   0
		NMI	 conforms    conforms	     0	 0:A	    255	   1

-------------------------------------------------------------------------------

# SMP kernel config file options:


# Required:
options		SMP			# Symmetric MultiProcessor Kernel
options		APIC_IO			# Symmetric (APIC) I/O

# Optional (built-in defaults will work in most cases):
#options		NCPU=2			# number of CPUs
#options		NBUS=2			# number of busses
#options		NAPIC=1			# number of IO APICs
#options		NINTR=24		# number of INTs

-------------------------------------------------------------------------------

dmesg output:

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Sun Jun  4 19:24:50 CEST 2000
    jfh@es-i2.fernuni-hagen.de:/usr/obj/usr/src/sys/ES-I2.single
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (265.26-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
  Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 268435456 (262144K bytes)
avail memory = 257892352 (251848K bytes)
Preloaded elf kernel "kernel.single" at 0xc031e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
Correcting Natoma config for non-SMP
Correcting Natoma config for non-SMP
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX3 ATA controller> at 7.1
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 10.0 irq 11
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xef00-0xef3f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:60:08:57:38:16
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: supplying EUI64: 00:60:08:ff:fe:57:38:16
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xec00-0xecff mem 0xfebfb000-0xfebfbfff irq 11 at device 14.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Waiting 5 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM XP39100W LYK8> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM XP39100W LXY4> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <TEAC CD-ROM CD-516S 1.0G> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
xl0: starting DAD for fe80:0001::0260:08ff:fe57:3816
xl0: DAD complete for fe80:0001::0260:08ff:fe57:3816 - no duplicates found

===============================================================================


>Description:

	sporadic reboots when imapd or smbd activities occur.

>How-To-Repeat:

	boot server with SMP kernel when samba and imapd users are active

>Fix:

	don't use SMP :-(


>Release-Note:
>Audit-Trail:
>Unformatted:
 Fritz Heinrichmeyer


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006051409.QAA05518>