Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 31 Jul 1998 13:27:35 -0700 (PDT)
From:      Doug White <dwhite@resnet.uoregon.edu>
To:        Philippe Regnauld <regnauld@deepo.prosa.dk>
Cc:        Dermot McNally <derm@iol.ie>, freebsd-current@FreeBSD.ORG
Subject:   Re: Problems with ed driver (PCI)
Message-ID:  <Pine.BSF.4.00.9807311327070.14321-100000@resnet.uoregon.edu>
In-Reply-To: <19980731100027.62584@deepo.prosa.dk>

next in thread | previous in thread | raw e-mail | index | archive | help

On Fri, 31 Jul 1998, Philippe Regnauld wrote:

> Dermot McNally writes:
> > On Mon, 27 Jul 1998 17:41:15 GMT, you wrote:
> > 
> > >However, this doesn't help, because after boot time, any attempt to
> > >configure the interface leads to the error:
> > >
> > >interface ed0 does not exist
> > 
> > OK, There have been a few suggestions so far, none of which hits the
> > problem. I'd better give a few more details.
> > 
> > The card is actually sold under the name "Micronet" although it is
> > recognised as a Realtek chipset. Its little green light goes on, indicating
> > that it sees the network OK and the corresponding little green light on the
> > hub comes on too.
> 
> 	Ok, I've had this problem too -- I was at the ISOC Workshops in
> 	Geneva, and we wanted to install FreeBSD on the machines we had
> 	there (P200 HP Vectra ?L) -- the cards available were all
> 	3c905, and a few spare Realtek chipset-based PCI ed's.
> 
> 	FreeBSD 2.2.6 _with this machine_ has the exact same symptom:
> 
> 	- probe find the card (as ed1)
> 	- ifconfig sees _no_ ed1.
> 
> 	What bugs me is the _same_ card on another 2.2.6, this
> 	one ASUS TX-97 based, works fine.  I even copied
> 	and pasted the relevant lines from the kernel config file...

Curiosity kills, what does `ifconfig -l' report on machines exhibiting
this problem?

Doug White                              | University of Oregon  
Internet:  dwhite@resnet.uoregon.edu    | Residence Networking Assistant
http://gladstone.uoregon.edu/~dwhite    | Computer Science Major


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.00.9807311327070.14321-100000>