Date: Tue, 08 Dec 2009 22:51:40 +0100 From: Beat Siegenthaler <beat.siegenthaler@beatsnet.com> To: freebsd-questions@freebsd.org Subject: bridge "filters" ipv6 Message-ID: <4B1ECA6C.8050709@beatsnet.com>
next in thread | raw e-mail | index | archive | help
Hi all,
I have 7.2-RELEASE and a bridge between ath0 and sis0 everything works
fine except ipv6 including router advertisements.
There is no filtering, just a L2 bridge without any address. rtadv
comes from lan/sis. What could be missing?
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 0a:03:b2:xx:fe:xx
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: sis0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 2 priority 128 path cost 200000
member: ath0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 370370
ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 1500
ether 00:80:48:xx:cd:xx
inet6 fe80::280:48xx:fexx:xxxx%ath0 prefixlen 64 scopeid 0x1
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: associated
ssid xxxxxxxxx channel 11 (2462 Mhz 11g) bssid 00:80:48:xx:cd:xx
authmode WPA1+WPA2/802.11i privacy MIXED deftxkey 2 TKIP 2:128-bit
txpower 22 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
roam:rssi11g 7 roam:rate11g 5 pureg protmode RTSCTS wme burst
dtimperiod 1
sis0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 1500
options=8<VLAN_MTU>
ether 00:0d:b9:xx:52:xx
inet6 fe80::20d:b9ff:fe03:52fc%sis0 prefixlen 64 scopeid 0x2
inet 172.23.0.1 netmask 0xffffff00 broadcast 172.20.0.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B1ECA6C.8050709>