Date: Mon, 02 Mar 2009 08:28:01 -0600 From: Adam Vande More <amvandemore@gmail.com> Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: Bridging-(How to test and verify that bridging is enabled) Message-ID: <49ABECF1.9070900@gmail.com> In-Reply-To: <BLU149-W184C647F07F59A0FEB0460B6A90@phx.gbl> References: <BLU149-W30AA22383B41E0B5F3E951B6A90@phx.gbl> <200903020828.n228SAN7080657@banyan.cs.ait.ac.th> <BLU149-W4004210FC05DBF9A1D024B6A90@phx.gbl> <200903020935.n229ZXXo090477@banyan.cs.ait.ac.th> <BLU149-W39D17E34A52D39B08A8503B6A90@phx.gbl> <49ABE3B8.1010801@gmail.com> <BLU149-W811D1335B14B340BA3738DB6A90@phx.gbl> <49ABE795.1070306@gmail.com> <BLU149-W184C647F07F59A0FEB0460B6A90@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
Faizan ul haq Muhammad wrote: > > > > > > Date: Mon, 2 Mar 2009 08:05:09 -0600 > > From: amvandemore@gmail.com > > CC: freebsd-questions@freebsd.org > > Subject: Re: Bridging-(How to test and verify that bridging is enabled) > > > > Faizan ul haq Muhammad wrote: > > > > > > > > > > > > > > > > Date: Mon, 2 Mar 2009 07:48:40 -0600 > > > > From: amvandemore@gmail.com > > > > CC: freebsd-questions@freebsd.org > > > > Subject: Re: Bridging-(How to test and verify that bridging is > enabled) > > > > > > > > Faizan ul haq Muhammad wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >> Date: Mon, 2 Mar 2009 16:35:33 +0700 > > > > >> From: on@cs.ait.ac.th > > > > >> To: faizi62@hotmail.com > > > > >> CC: fbsd.questions@rachie.is-a-geek.net; > > > freebsd-questions@freebsd.org; fbsd1@a1poweruser.com > > > > >> Subject: Re: Bridging-(How to test and verify that bridging is > > > enabled) > > > > >> > > > > >> Hi, > > > > >> > > > > >> > > > > >>>> Are you using properly crossed cables? > > > > >>>> > > > > >>> Isnt it enough check for the that two linux can ping each > other.. > > > > >>> > > > > >> Yes and no. You must used crossed Ethernet cable between your > FreeBSD > > > > >> bridge and each of your Linux boxes. > > > > >> > > > > > Frankly i am not sure about the cables type but they works PC to > > > PC connectivity. > > > > > > > > > >> As someone suggested, what is ifconfig saying on the FreeBSD > box? You > > > > >> should see that both sk0 and sk1 have a status: active. Else > it means > > > > >> you have a cable problem. > > > > >> > > > > > > > > > > sk0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> > > > metric 0 mtu 1500 > > > > > > > > > > options=b<RXCSUM, TXCSUM, VLAN_MTU > > > > > ether 00:0a:5e:1a:69:25 > > > > > media: Ethernet autoselect (1000baseTX <full-duplex, flag0, > flag1, > > > flag2>) > > > > > status: active > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > sk1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> > > > metric 0 mtu 1500 > > > > > > > > > > options=b<RXCSUM, TXCSUM, VLAN_MTU > > > > > ether 00:0a:5e:1a:67:ee > > > > > media: Ethernet autoselect (1000baseTX <full-duplex, flag0, > flag1, > > > flag2>) > > > > > status: active > > > > > > > > > > > > > > > > > > > > here is the ifconfig output for the bridge interface: > > > > > > > > > > bridge0: flags=8943<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> > metric > > > 0 mtu 1500 > > > > > > > > > > options=b<RXCSUM, TXCSUM, VLAN_MTU > > > > > ether 0a:54:d7:7e:aa:66 > > > > > > > > > > inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 > > > > > > > > > > id 00:00:00:00:00:00 priortiy 32768 hellotime 2 fwddelay 15 > > > > > > > > > > maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 > > > > > > > > > > root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 > > > > > > > > > I think ifconfig bridge0 should list member interfaces. Did you add > > > them? > > > > > > ifconfig bridge0 addm sk0 addm sk1 up > > > ifconfig sk0 up > > > ifconfig sk1 up > > > > > > this configuration exists in rc.conf > > > > > > > > if ifconfig doesn't print out something like this: > > > > bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu > > 1500 > > ether 4a:be:26:65:75:06 > > id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 > > maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 > > root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 > > member: sk0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> > > ifmaxaddr 0 port 1 priority 128 path cost 2000000 > > member: sk1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> > > ifmaxaddr 0 port 2 priority 128 path cost 200000 > > > > Then you need to add the member interfaces. > > i noted that, following information is missing > member: sk0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> > ifmaxaddr 0 port 1 priority 128 path cost 2000000 > member: sk1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> > ifmaxaddr 0 port 2 priority 128 path cost 200000 > > Now i need to know how to add the interfaces..? > Any command do u knw and can help me..? > > Regards!!! > > <http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_032009>; ifconfig bridge0 addm sk0 addm sk1 up ifconfig sk0 up ifconfig sk1 up
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49ABECF1.9070900>