Date: Fri, 01 Nov 2002 23:45:20 +0100 From: Kent Palmkvist <Kent.Palmkvist@home.se> To: Alex <freebsd-reply@akruijff.dds.nl>, freebsd-stable@FreeBSD.ORG Subject: Re: ata problem on old P60 Message-ID: <5.1.1.5.0.20021101234209.039b2040@garm.isy.liu.se> In-Reply-To: <14451851178.20021015000644@dds.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
I have had the same problem, and have now found a way around it: Solution 1: Copy the install floppy kernel onto the hard drive. Can be done using the fixit option. Solution 2: Patch the /sys/dev/ata/ata-pci.c so the atapci probe does not recognize the RZ 100? chip. Recompile the kernel. There is also an gnats problem report called i386/43222 setrootbyname panic in 4.6. A more detailed description of the problem and solution has been added. /Kent At 00:06 2002-10-15 +0200, Alex wrote: >Hello FreeBSD users, > >I've just installed FreeBSD 4.7 via FTP. The install went perfect only >after this is has trouble during the boot. I have a Pentium 60 MHz >with 32M of memory and 96M of swap. I had FreeBSD on this computer >before and there where no problem until the new ata kernel. (FreeBSD >4.5+). I read something for a workaround for ata cdrom players. Is >there something like this i can try for other ata hardware? I included >the entire bootup text. > > > CPU: Pentium/P5 60Mhz 586-CUP class > > Origin = "GenuineINtel" Id = 0x517 Stepping = 7 > > Features = 0x1bf<FPU, VME, DE, PSE, TSC, MSR, MCE, CX8> > > real memory = 32M > > avail = 27M > > Preload elf kernel "kernel" at 0xc050f000 > > INtel Pentium detected, installing workaround for F00F bug > > md0 Mallock disk > > npx0: <math processor> on motherboeard > > npx0: INT 16 interface > > pcib0: <Host to PCI bridge> on motherboeard > > pci0: PCI bus on pcib0 > > atapci0: <RZ 100? ATA controller !warning~ buggy chip data loss > possible> port 0x3f4-0x3f7,0x1f0-0x1f7 at device 1.0 on pci0 > > atapci0: busmastering DMA not supported > > atapci0: busmastering DMA disabled > > ata2: at 0x1f0 on atapci0 > > ata2 unable to allocate interrupt > > device_probe_and _attach ata2 attach returned 6 > > isab0 <INtel 82378IB PCI to ISA bride> at device 2.0 on pci0 > > isa0 ISA BUS on isab0 > > xl0 Thernet address ---- > > miibus0: MII BUS on xl0 > > xlphy0 <3c905c, 10/100 internal PHY> on miibus0 > > xlphy0: ---- > > pci0: <ATA mach64-CT graphics accelerator at 12.0 > > ed0 -- > > ed0 --- > > orm0: option roms at iomem > 0xc00000xc7fff,0xc80000-0xc87ff,0xed000-0xedfff on isa0 > > fdc0: NEC 72065B or clone at port 0x3f00x3f5, 0x3f7 irq 6 drq 2 on isa0 > > fdc0: FIFO enabled, 8 bytes threshold > > fd0 1440-KB 3.5 drive on fdc0 drive 0 > > ata at port 0x170-0x177,0x376 irq 15 on isa0 > > atkbd0 |AT keybord flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > vga0 Generic ISA VGA at port 0x3c0-0x3df iomem oxa0000-0xbffff on isa0 > > sc0 System console at flags 0x100 on isao > > sc0 VGA 16 virtuals consoles flags=0x300 > > sio0: configured irq 4 not in bitmap of probed irqs 0 > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 8250 > > sio1: configures irq 3 not in bitmap of probed irqs 0 > > ppc0: parallel port not found > > acd0: CDROM <GDC-R542B> at ata1-master BIOSPIO > > MOunt root from ufs:/dev/ad0s1a > > no such device 'ad' > > setrootbyname failed > > ffs_mountroot can't fine rootvp > > root mount failed: 6 > > > > mountroot> .... > > >-- >Tanks in advance for answering me, >Alex > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.1.5.0.20021101234209.039b2040>