Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 30 Dec 2016 17:44:40 +0100
From:      swjatoslaw gerus <milstar2@eml.cc>
To:        freebsd-questions@freebsd.org
Subject:   Fwd: Re: after dd freebsd performed, tryed  check /dev/sdb1(notebook can not start with flash)
Message-ID:  <1483116280.3177184.833095993.39D8640D@webmail.messagingengine.com>

next in thread | raw e-mail | index | archive | help
Dear Sir

performed  

1.  cd  /     
2. mkdir  /mnt    
3. cd  /mnt
4. mount -f pcfs  /dev/sdb1   /mnt
5.ls -lsar  /mnt  ... root . root ..   nothing
6. more  /dev/sdb1    -Yes as before
7. cd /
8. ls -lsar /mnt    -as in p 5

##################
 About your point of view  -hardware cheking

 Student s-admin  after installation failed ,stated 
(forced author work with  sudo su startx - not managed
blocked windov)
It is radeon 3450 , would not work with 64 u-16.04.1,you must go to
L-mint )

Author started  - tty1 sudo su xinit  - tty2  , unity  -
It is work
###########

  Thank  You for assitance ,would pay attetion to your suggest
(will read more)





-- 
  swjatoslaw  ger
  milstar2@eml.cc

----- Original message -----
From: Polytropon <freebsd@edvax.de>
To: swjatoslaw gerus <milstar2@eml.cc>
Cc: freebsd-questions@freebsd.org
Subject: Re: after dd freebsd performed, tryed  check /dev/sdb1(notebook
can not start with flash)
Date: Fri, 30 Dec 2016 15:43:28 +0100

On Fri, 30 Dec 2016 02:32:56 +0100, swjatoslaw gerus wrote:
> after dd freebsd  and solaris  on new sandisk  ultrafit 16gb
> performed,tryed  check /dev/sdb1(notebook can not start with flash)

How "and"? How did you manage to put two (!) images on
one and the same boot media? This looks wrong.

If you prepare a FreeBSD boot USB stick with the memstick
image, using dd, this stick will boot FreeBSD (_from_ the
stick), nothing else.



> 1. fdisk -l   ...dev/sdb1  c W95  FAT32 (LBA)

That looks wrong as well. A FreeBSD memstich, if created
properly, does not look like a FAT32 file system.



> 2.mkdir  /home/user/mnt
> 
> 3.mount -f pcfs /dev/sdb1  /home/user/mnt

That shouldn't even be possible with a properly written
FreeBSD image. From "man mount_pcfs" (Solaris):

	mount attaches an MS-DOS file system (pcfs) to the
	file system hierarchy at the mount_point, which is
	the pathname of a directory. If mount_point has any
	contents prior to the mount operation, these are
	hidden until the file system is unmounted.

I'm not sure what you did (successfully?) mount, but it
doesn't really look like anything FreeBSD-related...




> or  ubuntu 16.04 not compatible

I cannot imagine that it should be impossible to create a
FreeBSD USB stick from Ubuntu. You don't need more than dd
and the memstick image. CHeck your process again, compare
to the online documentation.



> 4.more /dev/sdb1
> 
> some great file started with 
> 
> Loading keymap
> 
> oadertoo large
> 
> Non-system disk
> 
> Press any key to reboot
> 
> folloving text not readable

It is _not_ a text file, so you cannot display it with
the "more" pager. You're literally reading the stick,
and at its beginning, there is binary (!) boot code,
which you cannot actually read. :-)

Instead, after mounting, you should have issued the
command

	# ls /home/user/mnt

so you can check what's on the media - on a file system
level, not on "bare bits & bytes". ;-)



> what is false ? must be cleaned for second dd attempt ?

In best case, remaining data is overwritten by dd, so
there is no need to remove anything prior to a new
attempt.



> or  problem is multiboot scenario  ?

It shouldn't be. Booting from USB should have priority
over whatever is stored on the computer's hard disk.
Again, make sure that your PC's BIOS/UEFI has booting
from USB enabled.




-- 
Polytropon
Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...

-- 
http://www.fastmail.com - The professional email service




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1483116280.3177184.833095993.39D8640D>