Date: Thu, 7 Feb 2002 18:52:00 +0100 From: "Philipp Hug" <lists@hug.cx> To: <freebsd-stable@FreeBSD.ORG> Subject: Logitech iFeel mouse with FreeBSD 4.5 - GENERIC Message-ID: <028a01c1b000$2594c580$1a0111ac@troja>
next in thread | raw e-mail | index | archive | help
hi all,
I'm getting the following messages, when I start with the mouse attached:
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub3: 4 ports with 4 removable, self powered
--> system freezed for about 20s
ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3, iclass 3/1
device_probe_and_attach: ums0 attach returned 6
ugen0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3
--> system freezed for about 20s
ugen0: setting configuration index 0 failed
device_probe_and_attach: ugen0 attach returned 6
This is a fresh installation of 4.5 RELEASE. (I get the same with the
installation cd)
has anything been fixed? should I update to stable?
-
philipp
---
output from usbdevs -v
Controller /dev/usb0:
addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev
0x0100
port 1 powered
port 2 powered
port 3 powered
Controller /dev/usb1:
addr 1: self powered, config 1, OHCI root hub(0x0000), NEC(0x0000), rev
0x0100
port 1 powered
port 2 powered
complete dmesg follows here:
Rebooting...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 1700+ (1471.92-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 1073676288 (1048512K bytes)
avail memory = 1040375808 (1015992K bytes)
Preloaded elf kernel "kernel" at 0xc0496000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f7d90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
dc0: <Intel 21143 10/100BaseTX> port 0xd400-0xd47f mem 0xdffcfc00-0xdffcffff
irq 10 at device 6.0 on pci0
dc0: Ethernet address: 00:c0:ca:17:ef:d0
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 8.0 irq 12
pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 8.1
ohci0: <NEC uPD 9210 USB controller> mem 0xdffcd000-0xdffcdfff irq 11 at
device 11.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xdffce000-0xdffcefff irq 10 at
device 11.1 on pci0
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <USB controller> at 11.2 irq 5
atapci0: <Promise ATA100 controller> port
0xd800-0xd83f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 mem
0xdffe0000-0xdfffffff irq 10 at device 12.0 on pci0
ata2: at 0xe800 on atapci0
ata3: at 0xe000 on atapci0
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 82C686 ATA100 controller> port 0xfc00-0xfc0f at device 17.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 12 at device 17.2
on pci0
usb2: <VIA 83C572 USB controller> on uhci0
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub3: 4 ports with 4 removable, self powered
ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3, iclass 3/1
device_probe_and_attach: ums0 attach returned 6
ugen0: Logitech, Inc. iFeel Mouse, rev 1.00/1.00, addr 3
ugen0: setting configuration index 0 failed
device_probe_and_attach: ugen0 attach returned 6
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 12 at device 17.3
on pci0
usb3: <VIA 83C572 USB controller> on uhci1
usb3: USB revision 1.0
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 12 at device 17.4
on pci0
usb4: <VIA 83C572 USB controller> on uhci2
usb4: USB revision 1.0
uhub5: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
orm0: <Option ROM> at iomem 0xc0000-0xc87ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Brother HL-1450 series> PRINTER PJL,PCL,PCLXL,POSTSCRIPT
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 117246MB <Maxtor 4G120J6> [238216/16/63] at ata0-master UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W1610A> at ata1-master using PIO4
acd1: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-104S 0202> at ata1-slave using
PIO4
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?028a01c1b000$2594c580$1a0111ac>