Date: Tue, 2 Aug 2005 22:52:33 +0300 From: Niki Denev <nike_d@cytexbg.com> To: current@freebsd.org Subject: if_ipw problems Message-ID: <200508022252.33933.nike_d@cytexbg.com>
next in thread | raw e-mail | index | archive | help
Hello,
I have problems getting the ipw(4) wireless interface on my TP X31 to work.
I'm running -Current cvsupped and built from about 2 hours ago (i have this
problem from long time, but hadn't the time to report it.)
The firmware is the latest from the ports.
When using exactly the same wpa_supplicant config with different wireless card
(ralink) i can authentitace to a LinkSys WPA54G access point.
But it never works for ipw.
One thing that i discovered is that when i do ifconfig ipw0 scan
there is always one 'fake network' without SSID and with zero macaddr :
# ifconfig ipw0 scan
SSID BSSID CHAN RATE S:N INT CAPS
00:00:00:00:00:00 11 0M 0:0 0
office.ss 00:0f:66:11:13:1e 11 54M 29:0 100 EP WPA
This looks really odd, and i can't reproduce it with other wlan cards.
wpa_supplicant.conf is :
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
eapol_version=1 or 2 (tried both of them)
network={
ssid="office.ss"
proto=WPA
key_mgmt=WPA-PSK
psk="xxxx"
}
network={
ssid="totalterror-wlan"
proto=WPA
key_mgmt=WPA-PSK
psk="yyyy"
}
Here is debug output from wpa_supplicant with if_ipw :
Initializing interface 'ipw0' conf '/etc/wpa_supplicant.conf' driver 'default'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0 (from group name 'wheel')
eapol_version=2
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=9):
6f 66 66 69 63 65 2e 73 73 office.ss
proto: 0x1
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=11): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line: 14 - start of a new network block
ssid - hexdump_ascii(len=16):
74 6f 74 61 6c 74 65 72 72 6f 72 2d 77 6c 61 6e totalterror-wlan
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=15): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='office.ss'
id=1 ssid='totalterror-wlan'
Initializing interface (2) 'ipw0'
Own MAC address: 00:04:23:92:33:23
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=16):
74 6f 74 61 6c 74 65 72 72 6f 72 2d 77 6c 61 6e totalterror-wlan
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
---
i cancelled it at this point, but it loops like this forever(or atleast couple
of hours :) )
I will gladly provide more info if needed.
--niki
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200508022252.33933.nike_d>