Date: Sun, 19 Dec 2004 14:29:03 -0500 (EST) From: Bryan Liesner <bryan@kishka.net> To: freebsd-stable@freebsd.org Subject: ACPI errors after recent import Message-ID: <20041219142659.O448@gravy.kishka.net>
next in thread | raw e-mail | index | archive | help
Attached is a verbose dmesg after building today's 5.3-STABLE
Just a note - This system has never seen a single acpi issue before.
=============================================================
pcibios: PCI BIOS entry at 0xf0000+0xed0
pnpbios: Found PnP BIOS data at 0xc00fbfe0
pnpbios: Entry = f0000:c010 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
netsmb_dev: loaded
io: <I/O>
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 00 01 00 01 10 01 00 01 26 01 00 01 2b 01
00 01 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01
20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01
VESA: 56 mode(s) found
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc0732f42 (1000022)
VESA: ATI RADEON 9200
VESA: ATI Technologies Inc. V280 01.00
mem: <memory>
Pentium Pro MTRR support enabled
acpi0: <ASUS A7V266-E> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00f1480
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 5 A 0x02 3 4 5 7 9 10 11 12
embedded 0 5 B 0x03 3 4 5 7 9 10 11 12
embedded 0 6 A 0x05 3 4 5 7 9 10 11 12
slot 1 0 12 A 0x05 3 4 5 7 9 10 11 12
slot 1 0 12 B 0x01 3 4 5 7 9 10 11 12
slot 1 0 12 C 0x02 3 4 5 7 9 10 11 12
slot 1 0 12 D 0x03 3 4 5 7 9 10 11 12
slot 2 0 13 A 0x01 3 4 5 7 9 10 11 12
slot 2 0 13 B 0x02 3 4 5 7 9 10 11 12
slot 2 0 13 C 0x03 3 4 5 7 9 10 11 12
slot 2 0 13 D 0x05 3 4 5 7 9 10 11 12
slot 3 0 14 A 0x02 3 4 5 7 9 10 11 12
slot 3 0 14 B 0x03 3 4 5 7 9 10 11 12
slot 3 0 14 C 0x05 3 4 5 7 9 10 11 12
slot 3 0 14 D 0x01 3 4 5 7 9 10 11 12
slot 4 0 15 A 0x03 3 4 5 7 9 10 11 12
slot 4 0 15 B 0x05 3 4 5 7 9 10 11 12
slot 4 0 15 C 0x01 3 4 5 7 9 10 11 12
slot 4 0 15 D 0x02 3 4 5 7 9 10 11 12
slot 5 0 16 A 0x05 3 4 5 7 9 10 11 12
slot 5 0 16 B 0x01 3 4 5 7 9 10 11 12
slot 5 0 16 C 0x02 3 4 5 7 9 10 11 12
slot 5 0 16 D 0x03 3 4 5 7 9 10 11 12
slot 6 1 0 A 0x01 3 4 5 7 9 10 11 12
slot 6 1 0 B 0x02 3 4 5 7 9 10 11 12
embedded 0 17 A 0x01 3 4 5 7 9 10 11 12
embedded 0 17 B 0x02 3 4 5 7 9 10 11 12
embedded 0 17 C 0x03 3 4 5 7 9 10 11 12
embedded 0 17 D 0x05 3 4 5 7 9 10 11 12
embedded 0 18 A 0x01 3 4 5 7 9 10 11 12
embedded 0 18 B 0x02 3 4 5 7 9 10 11 12
embedded 0 18 C 0x03 3 4 5 7 9 10 11 12
embedded 0 18 D 0x05 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI timer: 1/1 1/2 0/447 1/2 1/1 1/1 1/1 1/2 1/1 1/1 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.5.0
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.5.1
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.6.0
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.12.0
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.12.1
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.12.2
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.12.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.13.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.13.1
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.13.2
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.13.3
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.14.0
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.14.1
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.14.2
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.14.3
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.15.0
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.15.1
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.15.2
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.15.3
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.16.0
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.16.1
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.16.2
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.16.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.17.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.17.1
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.17.2
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.17.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.18.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.18.1
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.18.2
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.18.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x1106, dev=0x3099, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb099, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base de000000, size 12, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKA)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 8, priority 93650):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 310 310 360 620 5310 5310 5310 5310 5310 50310 50310
\\_SB_.LNKC (references 8, priority 93650):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 310 310 360 620 5310 5310 5310 5310 5310 50310 50310
\\_SB_.LNKD (references 8, priority 93650):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 310 310 360 620 5310 5310 5310 5310 5310 50310 50310
\\_SB_.LNKA (references 7, priority 81944):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 310 310 360 620 5310 5310 5310 5310 5310 50310 50310
pcib0: slot 13 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=0, slot=13, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dd800000, size 12, enabled
pcib0: matched entry for 0.13.INTB (src \\_SB_.LNKB)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 8, priority 96407):
interrupts: 10 5 11 9 12 7 6 4 3 15 14
penalty: 620 670 690 1240 5620 5620 5620 5620 5620 50620 50620
\\_SB_.LNKC (references 8, priority 96407):
interrupts: 10 5 11 9 12 7 6 4 3 15 14
penalty: 620 670 690 1240 5620 5620 5620 5620 5620 50620 50620
\\_SB_.LNKD (references 8, priority 96407):
interrupts: 10 5 11 9 12 7 6 4 3 15 14
penalty: 620 670 690 1240 5620 5620 5620 5620 5620 50620 50620
pcib0: slot 13 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=0, slot=13, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dd000000, size 8, enabled
pcib0: matched entry for 0.13.INTC (src \\_SB_.LNKC)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKC (references 8, priority 99170):
interrupts: 5 11 10 9 12 7 6 4 3 15 14
penalty: 980 1000 1010 1860 5930 5930 5930 5930 5930 50930 50930
\\_SB_.LNKD (references 8, priority 99170):
interrupts: 5 11 10 9 12 7 6 4 3 15 14
penalty: 980 1000 1010 1860 5930 5930 5930 5930 5930 50930 50930
pcib0: slot 13 INTC routed to irq 5 via \\_SB_.LNKC
found-> vendor=0x1033, dev=0x00e0, revid=0x04
bus=0, slot=13, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dc800000, size 15, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.LNKC)
pcib0: slot 15 INTA is already routed to irq 5
found-> vendor=0x1073, dev=0x0004, revid=0x05
bus=0, slot=15, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x05 (1250 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=5
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000b800, size 8, enabled
map[14]: type 1, range 32, base dc000000, size 8, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKD)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKD (references 8, priority 101934):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 1310 1320 1370 2480 6240 6240 6240 6240 6240 51240 51240
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKD
found-> vendor=0x10d9, dev=0x0531, revid=0x25
bus=0, slot=16, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3074, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000b400, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000b000, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.LNKD)
pcib0: slot 17 INTD is already routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000a800, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.LNKD)
pcib0: slot 17 INTD is already routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000a400, size 5, enabled
pcib0: matched entry for 0.17.INTD (src \\_SB_.LNKD)
pcib0: slot 17 INTD is already routed to irq 11
found-> vendor=0x1106, dev=0x3038, revid=0x1b
bus=0, slot=17, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xde800000-0xdfefffff
pcib1: prefetched decode 0xe0000000-0xf7ffffff
ACPI PCI link initial configuration:
\\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 1.0.0
\\_SB_.LNKB irq*10: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xd800-0xd8ff
map[18]: type 1, range 32, base df000000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xdf000000-0xdf00ffff
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA)
pcib1: slot 0 INTA is already routed to irq 11
found-> vendor=0x1002, dev=0x5961, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff
map[14]: type 1, range 32, base de800000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xde800000-0xde80ffff
found-> vendor=0x1002, dev=0x5941, revid=0x01
bus=1, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
drm0: <ATI Radeon RV280 9200 SE> port 0xd800-0xd8ff mem 0xdf000000-0xdf00ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
pci1: <display> at device 0.1 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xde000000-0xde000fff irq 11 at device 13.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xde000000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ulpt0: hp deskjet 5100, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ohci1: <NEC uPD 9210 USB controller> mem 0xdd800000-0xdd800fff irq 10 at device 13.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdd800000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: Buslink USB 2.0 Hard Drive, rev 2.00/11.00, addr 2
umass0:1:0:-1: Attached to scbus1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xdd000000-0xdd0000ff irq 5 at device 13.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdd000000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 5 ports with 5 removable, self powered
umass1: Buslink USB 2.0 Hard Drive, rev 2.00/11.00, addr 2
umass1:2:1:-1: Attached to scbus2
pcm0: <Yamaha DS-1 (YMF724)> mem 0xdc800000-0xdc807fff irq 5 at device 15.0 on pci0
pcm0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xdc800000
ds1: setmap (1f442000, 3de4), nseg=1, error=0
pcm0: <SigmaTel STAC9704 AC97 Codec (id = 0x83847605)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: [GIANT-LOCKED]
pcm0: sndbuf_setmap 22f000, 1000; 0xc165b000 -> 22f000
pcm0: sndbuf_setmap 269000, 1000; 0xc1675000 -> 269000
pcm0: sndbuf_setmap 227000, 1000; 0xc1673000 -> 227000
pcm0: sndbuf_setmap 265000, 1000; 0xc1671000 -> 265000
pcm0: sndbuf_setmap 283000, 1000; 0xc166f000 -> 283000
pcm0: sndbuf_setmap 281000, 1000; 0xc166d000 -> 281000
dc0: <Macronix 98715AEC-C 10/100BaseTX> port 0xb800-0xb8ff mem 0xdc000000-0xdc0000ff irq 11 at device 16.0 on pci0
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:80:c6:f9:70:ec
dc0: if_start running deferred for Giant
dc0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 UDMA100 controller> port 0xb400-0xb40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 11 at device 17.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
uhci0: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci0
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ums0: Logitech Trackball, rev 1.10/2.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhid0: Saitek Saitek ST90 USB Stick, rev 2.00/2.00, addr 3, iclass 3/0
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 11 at device 17.3 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
uhci1: [GIANT-LOCKED]
usb4: <VIA 83C572 USB controller> on uhci1
usb4: USB revision 1.0
uhub4: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 11 at device 17.4 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa400
uhci2: [GIANT-LOCKED]
usb5: <VIA 83C572 USB controller> on uhci2
usb5: USB revision 1.0
uhub5: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart0: fast interrupt
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: fast interrupt
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
atkbd0: [GIANT-LOCKED]
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 2014579936 Hz quality 800
Timecounters tick every 10.000 msec
splash: image decoder found: green_saver
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8233 chip
ata0-master: setting UDMA100 on VIA 8233 chip
ata0-slave: setting PIO4 on VIA 8233 chip
ata0-slave: setting UDMA100 on VIA 8233 chip
ad0: <ST380013A/3.06> ATA-6 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:156301425
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 80026329600 end 80026361855
ad1: <MAXTOR 6L060J3/A93.0500> ATA-5 disk at ata0-slave
ad1: 57259MB (117266688 sectors), 116336 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure ad0s1a, start 0 length 78952529920 end 78952529919
GEOM: Configure ad0s1b, start 78952529920 length 1073799680 end 80026329599
GEOM: Configure ad0s1c, start 0 length 80026329600 end 80026329599
GEOM: new disk ad1
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata1-master: pio=0x0c wdma=0x22 udma=0x44 cable=40pin
ata1-master: setting PIO4 on VIA 8233 chip
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
ata1-master: setting UDMA33 on VIA 8233 chip
ata1-slave: setting PIO4 on VIA 8233 chip
ata1-slave: setting UDMA33 on VIA 8233 chip
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):623/15/63 s:63 l:117266625
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 60040512000 end 60040544255
GEOM: Configure ad1s1c, start 0 length 60040512000 end 60040511999
GEOM: Configure ad1s1e, start 8192 length 60040503808 end 60040511999
ulpt0: at uhub0 port 2 (addr 2) disconnected
umass0: at uhub1 port 1 (addr 2) disconnected
ulpt0: detached
umass0: detached
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe4:umass-sim0:0:0:0): CAM Status 0x39
(probe4:umass-sim0:0:0:0): Retrying Command
(probe4:umass-sim0:0:0:0): CAM Status 0x39
(probe4:umass-sim0:0:0:0): Retrying Command
(probe4:umass-sim0:0:0:0): CAM Status 0x39
(probe4:umass-sim0:0:0:0): Retrying Command
(probe4:umass-sim0:0:0:0): CAM Status 0x39
(probe4:umass-sim0:0:0:0): Retrying Command
(probe4:umass-sim0:0:0:0): error 5
(probe4:umass-sim0:0:0:0): Retries Exhausted
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <SONY DVD RW DRU-710A BY01> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
pass1 at ata1 bus 0 target 1 lun 0
pass1: <SAMSUNG CD-R/RW SW-252B R701> Removable CD-ROM SCSI-0 device
pass1: Serial Number [
pass1: 33.000MB/s transfers
pass2 at umass-sim1 bus 1 target 0 lun 0
pass2: <SAMSUNG SV4002H QP10> Fixed Direct Access SCSI-0 device
pass2: Serial Number \^_
pass2: 10.000MB/s transfers
GEOM: new disk da0
GEOM: new disk cd0
GEOM: new disk cd1da0 at umass-sim1 bus 1 target 0 lun 0
da0: <SAMSUNG SV4002H QP10> Fixed Direct Access SCSI-0 device
da0: Serial Number \^_
da0: 10.000MB/s transfers
da0: 38204MB (78242976 512 byte sectors: 255H 63S/T 4870C)
cd1 at ata1 bus 0 target 1 lun 0
cd1: <SAMSUNG CD-R/RW SW-252B R701> Removable CD-ROM SCSI-0 device
cd1: Serial Number [
cd1: 33.000MB/s transfers
cd1: cd present [38902 x 2048 byte records]
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-710A BY01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):773/254/63 s:63 l:78236487
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 40057081344 end 40057113599
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
ulpt0: hp deskjet 5100, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
GEOM: Configure da0s1c, start 0 length 40057081344 end 40057081343
GEOM: Configure da0s1e, start 8192 length 40057073152 end 40057081343
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
ACPI-0252: *** Error: No object was returned from [\\_SB_.PCI0.PX40.UAR2._STA] (Node 0xc162a7c0), AE_NOT_EXIST
--
=============================================================
= Bryan D. Liesner LeezSoft Communications, Inc. =
= A subsidiary of LeezSoft Inc. =
= bryan@kishka.net Home of the Gipper =
=============================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041219142659.O448>