Date: Sun, 10 Oct 2004 15:22:05 +0200 From: Rene Ladan <r.c.ladan@student.tue.nl> To: freebsd-current@freebsd.org Subject: Re: ACPI suspend/ ATA reboots Message-ID: <20041010132205.GA8934@82-168-140-74-bbxl.xdsl.tiscali.nl> In-Reply-To: <200410091320.07593.mistry.7@osu.edu> References: <200410091320.07593.mistry.7@osu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
--J/dobhs11T7y2rNN Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Oct 09, 2004 at 01:19:58PM -0400, Anish Mistry wrote: > Running 6-CURRENT. Between 09.25.18.00.00 UTC and 09.26.12.00.00 UTC some= =20 > commit seemed to break suspending on my laptop. Whenever I try to suspen= d it=20 > reboots. Before this suspend was working well. The panic message seem t= o=20 > indicate an ATA issue. > http://am-productions.biz/docs/littleguy.asl.gz > http://am-productions.biz/docs/littleguy-dmesg.boot.gz > --=20 > Anish Mistry Sort of "me too". I'm running 5.3BETA7 (2004-10-06 10:08UTC). Whenever I give the zzz command it tries to suspend but gets stuck in a lock-related panic: #zzz Sleeping on "atasusp" with the following non-sleepable locks held: exclusive sleep mutex ATA state lock r=3D0 (0xc1075318) locked @ /usr/src/sys/dev/ata/ata-all.c:341 KDB: enter: witness-warn =2E panic uptime : ..... panic: _mtx_lock_sleep: recursed on non-recursive mutex ATA state lock @ /usr/src/sys/dev/ata/ata-queue.c:180 =2E panic panic: _mtx_lock_sleep: recursed on non-recursive mutex ATA state lock @ /usr/src/sys/dev/ata/ata-queue.c:86 =2E show witness (top ones shown:) ATA queue lock ata-queue.c:174 ATA state lock ata-all.c:341 bio queue geom_io.c:65 ATA disk bioqueue lcok ata-disk.c:236 ATA CD bioqueue lock atapi-cd.c:1100 =2E.. Giving the panic command doesn't give me a crash dump. apm_enable is set to NO and dumpdev is set to /dev/ad0s1b in /etc/rc.conf dmesg -v: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA7 #0: Tue Oct 5 22:35:15 CEST 2004 root@82-168-140-74-bbxl.xdsl.tiscali.nl:/usr/obj/usr/src/sys/RENE_2004-= 09-05d WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc07ea000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc07ea1f4. Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc07ea2a0. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07ea34c. Preloaded elf module "/boot/kernel/snd_cs4281.ko" at 0xc07ea3f8. Preloaded elf module "/boot/kernel/sound.ko" at 0xc07ea4a8. Preloaded elf module "/boot/kernel/random.ko" at 0xc07ea554. Preloaded elf module "/boot/kernel/speaker.ko" at 0xc07ea600. Preloaded elf module "/boot/kernel/mem.ko" at 0xc07ea6ac. Preloaded elf module "/boot/kernel/io.ko" at 0xc07ea754. Preloaded elf module "/boot/kernel/intpm.ko" at 0xc07ea7fc. Preloaded elf module "/boot/kernel/smbus.ko" at 0xc07ea8a8. Preloaded elf module "/boot/kernel/cd9660_iconv.ko" at 0xc07ea954. Preloaded elf module "/boot/kernel/libiconv.ko" at 0xc07eaa08. Preloaded elf module "/boot/kernel/cd9660.ko" at 0xc07eaab8. Preloaded elf module "/boot/kernel/msdosfs_iconv.ko" at 0xc07eab64. Preloaded elf module "/boot/kernel/msdosfs.ko" at 0xc07eac18. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07eacc4. Calibrating clock(s) ... i8254 clock: 1193083 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 497559801 Hz CPU: Intel Celeron (497.56-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 201261056 (191 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000000bc5ffff, 188981248 bytes (46138 pages) avail memory =3D 191459328 (182 MB) bios32: Found BIOS32 Service Directory header at 0xc00f63a0 bios32: Entry =3D 0xfd8a6 (c00fd8a6) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xfd890+0x134 pnpbios: Found PnP BIOS data at 0xc00f63d0 pnpbios: Entry =3D f0000:aa9f Rev =3D 1.0 Other BIOS signatures found: null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory> io: <I/O> VESA: information block 56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00=20 00 01 40 00 00 01 0b 01 00 01 21 01 00 01 2a 01=20 00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01=20 14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01=20 VESA: 40 mode(s) found VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc06f6302 (1000022) VESA: ATI MACH64 VESA: ATI Technologies Inc. MACH64RM 01.00 acpi0: <FUJ IRIS> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D71908086) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fdf50 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 D 0x63 9 10 11 embedded 0 4 A 0x60 10 11 embedded 0 8 A 0x62 5 7 9 10 slot 1 0 16 A 0x61 9 slot 2 0 17 A 0x63 9 embedded 0 1 A 0x61 9 10 11 embedded 1 0 A 0x61 9 10 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 4 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 4 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 4 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 16 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_ec0: <Embedded Controller: GPE 0x9> port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 180 us acpi_ec0: info: new max delay is 260 us ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4 ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4 ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4 ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 ACPI timer looks BAD min =3D 2, max =3D 6, width =3D 4 ACPI timer looks BAD min =3D 2, max =3D 7, width =3D 5 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKD irq 0: [ 5 9 10 11] 9+ low,level,sharable 0.7.3 \\_SB_.LNKA irq 0: [ 5 9 10 11] 11+ low,level,sharable 0.4.0 \\_SB_.LNKB irq 0: [ 5 9 10 11] 9+ low,level,sharable 0.4.1 \\_SB_.LNKC irq 0: [ 5 9 10 11] 5+ low,level,sharable 0.8.0 \\_SB_.LNKB irq 0: [ 5 9 10 11] 9+ low,level,sharable 0.16.0 \\_SB_.LNKD irq 0: [ 5 9 10 11] 9+ low,level,sharable 0.17.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 map[10]: type 3, range 32, base e0000000, size 26, enabled found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2210, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x001f, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x80 (3840 ns), mingnt=3D0x8c (35000 ns), maxlat=3D0x00 (0 ns) map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02 bus=3D0, slot=3D7, func=3D0 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[20]: type 4, range 32, base 00001080, size 4, enabled found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01 bus=3D0, slot=3D7, func=3D1 class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[20]: type 4, range 32, base 000010a0, size 5, port disabled pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD) pcib0: possible interrupts: 5 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKD (references 2, priority 175): interrupts: 11 10 5 9 penalty: 60 60 110 120 \\_SB_.LNKB (references 2, priority 175): interrupts: 11 10 5 9 penalty: 60 60 110 120 \\_SB_.LNKA (references 1, priority 87): interrupts: 11 10 5 9 penalty: 60 60 110 120 \\_SB_.LNKC (references 1, priority 87): interrupts: 11 10 5 9 penalty: 60 60 110 120 pcib0: slot 7 INTD routed to irq 9 via \\_SB_.LNKD found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01 bus=3D0, slot=3D7, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D9 map[90]: type 4, range 32, base 0000ff80, size 4, enabled found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x03 bus=3D0, slot=3D7, func=3D3 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 1, range 32, base fc101000, size 12, enabled map[14]: type 1, range 32, base fc110000, size 16, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.LNKC) pcib0: possible interrupts: 5 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKB (references 2, priority 335): interrupts: 11 10 5 9 penalty: 120 120 170 260 \\_SB_.LNKA (references 1, priority 167): interrupts: 11 10 5 9 penalty: 120 120 170 260 \\_SB_.LNKC (references 1, priority 167): interrupts: 11 10 5 9 penalty: 120 120 170 260 pcib0: slot 8 INTA routed to irq 5 via \\_SB_.LNKC found-> vendor=3D0x1013, dev=3D0x6005, revid=3D0x01 bus=3D0, slot=3D8, func=3D0 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc100000, size 12, enabled map[14]: type 4, range 32, base 00001040, size 6, enabled map[18]: type 1, range 32, base fc000000, size 20, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKB) pcib0: possible interrupts: 5 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKB (references 2, priority 490): interrupts: 11 10 5 9 penalty: 180 180 240 380 \\_SB_.LNKA (references 1, priority 245): interrupts: 11 10 5 9 penalty: 180 180 240 380 pcib0: slot 16 INTA routed to irq 9 via \\_SB_.LNKB found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x08 bus=3D0, slot=3D16, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0013, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 n= s) intpin=3Da, irq=3D9 powerspec 2 supports D0 D1 D2 D3 current D0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xfc200000-0xfdffffff pcib1: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: \\_SB_.LNKB irq* 9: [ 5 9 10 11] 9+ low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=3D1 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xfd000000-0xfdffffff map[14]: type 4, range 32, base 00002000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x2000-0x20ff map[18]: type 1, range 32, base fc200000, size 12, enabled pcib1: device (null) requested decoded memory range 0xfc200000-0xfc200fff pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKB) pcib1: slot 0 INTA is already routed to irq 9 found-> vendor=3D0x1002, dev=3D0x4c4d, revid=3D0x64 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 powerspec 1 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <bridge, PCI-CardBus> at device 4.0 (no driver attached) pci0: <bridge, PCI-CardBus> at device 4.1 (no driver attached) PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1080-0x108f,0x376,0x170-0x1= 77,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1080 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01 ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1-slave: stat=3D0x01 err=3D0x04 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 stat0=3D00 stat1=3D01 devices=3D0x4<ATAPI_MASTER> ata1: [MPSAFE] pci0: <serial bus, USB> at device 7.2 (no driver attached) intpm0: <Intel 82371AB Power management controller> port 0xff80-0xff8f irq = 9 at device 7.3 on pci0 intpm0: Reserved 0x10 bytes for rid 0x90 type 4 at 0xff80 intpm0: I/O mapped ff80 intpm0: intr IRQ 9 enabled revision 0 intpm0: [GIANT-LOCKED] intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 intpm0: PM I/O mapped 1000=20 pcm0: <Crystal Semiconductor CS4281> mem 0xfc110000-0xfc11ffff,0xfc101000-0= xfc101fff irq 5 at device 8.0 on pci0 pcm0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc101000 pcm0: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xfc110000 pcm0: [GIANT-LOCKED] pcm0: <Cirrus Logic CS4297A AC97 Codec (id =3D 0x43525914)> pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume= , Crystal Semi 3D Stereo Enhancement pcm0: Primary codec extended features AMAP pcm0: sndbuf_setmap bac4000, 4000; 0xca2d6000 -> bac4000 pcm0: sndbuf_setmap bac0000, 4000; 0xca2da000 -> bac0000 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1040-0x107f mem 0xfc000000-0xfc= 0fffff,0xfc100000-0xfc100fff irq 9 at device 16.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc100000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 10cf 108e 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:d0:59:01:ed:22 fxp0: [MPSAFE] unknown: not probed (disabled) speaker0 port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this ada= pter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83=20 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f=20 b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83=20 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f=20 b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 497559801 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <TOSHIBA MK4025GAS/KA100A> ATA-6 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin ata1-master: setting PIO4 on Intel PIIX4 chip ata1-master: setting UDMA33 on Intel PIIX4 chip acd0: <CD-224E/1.7A> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78140097 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 40007729664 end 40007761919 GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1b, start 268435456 length 376217600 end 644653055 GEOM: Configure ad0s1c, start 0 length 40007729664 end 40007729663 GEOM: Configure ad0s1d, start 644653056 length 1073741824 end 1718394879 GEOM: Configure ad0s1e, start 1718394880 length 268435456 end 1986830335 GEOM: Configure ad0s1f, start 1986830336 length 38020899328 end 40007729663 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init pci0: driver added found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0:4:0: reprobing on driver added found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0:4:1: reprobing on driver added found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01 bus=3D0, slot=3D7, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D9 pci0:7:2: reprobing on driver added uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x10a0-0x10bf irq 9 a= t device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x10a0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci1: driver added found-> vendor=3D0x1002, dev=3D0x4c4d, revid=3D0x64 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 powerspec 1 supports D0 D1 D2 D3 current D0 pci1:0:0: reprobing on driver added pci0: driver added found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0:4:0: reprobing on driver added found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0:4:1: reprobing on driver added pci1: driver added found-> vendor=3D0x1002, dev=3D0x4c4d, revid=3D0x64 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 powerspec 1 supports D0 D1 D2 D3 current D0 pci1:0:0: reprobing on driver added pci0: driver added found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0:4:0: reprobing on driver added found-> vendor=3D0x104c, dev=3D0xac51, revid=3D0x00 bus=3D0, slot=3D4, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D255 powerspec 1 supports D0 D1 D2 D3 current D0 pci0:4:1: reprobing on driver added pci1: driver added found-> vendor=3D0x1002, dev=3D0x4c4d, revid=3D0x64 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D9 powerspec 1 supports D0 D1 D2 D3 current D0 pci1:0:0: reprobing on driver added splash: image decoder found: blank_saver Linux ELF exec handler installed acpi_cmbat0: battery initialization failed, giving up kernel config: # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig= -config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files.=20 # If you are in doubt as to the purpose or necessity of a line, check first= =20 # in NOTES. # makeoptions DEBUG=3D-g machine i386 cpu I686_CPU options CPU_FASTER_5X86_FPU ident RENE_2004-09-05d device apic options SCHED_ULE options KDB options DDB options GDB # remote GDB support options WITNESS options WITNESS_SKIPSPIN options WITNESS_KDB options INVARIANTS options INVARIANT_SUPPORT options AHC_REG_PRETTY_PRINT options AHD_REG_PRETTY_PRINT options ADAPTIVE_GIANT options INET #InterNETworking, mandatory options INET6 #IPv6 communications protocols #options IPSEC #options IPSEC_ESP options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options KTRACE options PQ_CACHESIZE=3D32 #32kB L2 Cache options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions device isa device pci # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd options KBD_INSTALL_CDEV device psm # PS/2 mouse # syscons is the default console driver, resembling an SCO console device sc options SC_TWOBUTTON_MOUSE device vga # VGA video card driver options FB_INSTALL_CDEV device npx # Floating point support - do not disable. options DEVICE_POLLING # improve fxp0 performance options HZ=3D1000 # for DEVICE_POLLING, interrrupt rate device loop # Network loopback device ether # Ethernet support device pty # Pseudo-ttys (telnet,xterm etc) device bpf # needed for DHCP options XBONEHACK # same address pairs over multiple gif intf options PPP_BSDCOMP options PPP_DEFLATE options PPP_FILTER device splash #screensaver/splash screen device pmtimer kldstat: Id Refs Address Size Name 1 28 0xc0400000 2f1cd8 kernel 2 1 0xc06f2000 547c vesa.ko 3 1 0xc06f8000 a83c if_fxp.ko 4 2 0xc0703000 1aa04 miibus.ko 5 1 0xc071e000 597c snd_cs4281.ko 6 2 0xc0724000 21600 sound.ko 7 1 0xc0746000 c280 random.ko 8 1 0xc0753000 3084 speaker.ko 9 1 0xc0757000 2b4c mem.ko 10 1 0xc075a000 1cec io.ko 11 1 0xc075c000 450c intpm.ko 12 2 0xc0761000 3724 smbus.ko 13 1 0xc0765000 1e6c cd9660_iconv.ko 14 5 0xc0767000 4bdc libiconv.ko 15 2 0xc076c000 a64c cd9660.ko 16 1 0xc0777000 1e80 msdosfs_iconv.ko 17 2 0xc0779000 10b00 msdosfs.ko 18 14 0xc078a000 5e764 acpi.ko 19 1 0xc1265000 26000 usb.ko 20 1 0xc12ab000 2000 blank_saver.ko 21 1 0xc12c0000 1b000 linux.ko 22 1 0xc12db000 4000 sysvmsg.ko 23 1 0xc12e6000 5000 sysvsem.ko 24 1 0xc12f8000 4000 sysvshm.ko Rene --J/dobhs11T7y2rNN Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFBaTd9bWa3bO9NFoMRAo4PAKCALyCvKuPjb8UA7bJ8jvQdMjA7NACfY1dL EClOe5aXOOMCHGRqAxV9MAc= =k5a6 -----END PGP SIGNATURE----- --J/dobhs11T7y2rNN--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041010132205.GA8934>