From owner-freebsd-bugs@FreeBSD.ORG Mon Jul 2 11:20:03 2007 Return-Path: X-Original-To: freebsd-bugs@hub.freebsd.org Delivered-To: freebsd-bugs@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id D173B16A400 for ; Mon, 2 Jul 2007 11:20:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [69.147.83.40]) by mx1.freebsd.org (Postfix) with ESMTP id B072613C469 for ; Mon, 2 Jul 2007 11:20:03 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id l62BK3MZ086035 for ; Mon, 2 Jul 2007 11:20:03 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id l62BK3np086034; Mon, 2 Jul 2007 11:20:03 GMT (envelope-from gnats) Resent-Date: Mon, 2 Jul 2007 11:20:03 GMT Resent-Message-Id: <200707021120.l62BK3np086034@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-bugs@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, Keve Nagy Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id C469D16A400 for ; Mon, 2 Jul 2007 11:14:57 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (www.freebsd.org [69.147.83.33]) by mx1.freebsd.org (Postfix) with ESMTP id B2E8513C46E for ; Mon, 2 Jul 2007 11:14:57 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from www.freebsd.org (localhost [127.0.0.1]) by www.freebsd.org (8.13.1/8.13.1) with ESMTP id l62BEvDx008427 for ; Mon, 2 Jul 2007 11:14:57 GMT (envelope-from nobody@www.freebsd.org) Received: (from nobody@localhost) by www.freebsd.org (8.13.1/8.13.1/Submit) id l62BEvSq008426; Mon, 2 Jul 2007 11:14:57 GMT (envelope-from nobody) Message-Id: <200707021114.l62BEvSq008426@www.freebsd.org> Date: Mon, 2 Jul 2007 11:14:57 GMT From: Keve Nagy To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.0 Cc: Subject: kern/114213: optical drive not detected in the 6.x series of FreeBSD/i386 X-BeenThere: freebsd-bugs@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Bug reports List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 02 Jul 2007 11:20:03 -0000 >Number: 114213 >Category: kern >Synopsis: optical drive not detected in the 6.x series of FreeBSD/i386 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Jul 02 11:20:02 GMT 2007 >Closed-Date: >Last-Modified: >Originator: Keve Nagy >Release: FreeBSD/i386 6.2-RELEASE-p4 >Organization: >Environment: FreeBSD/i386 6.2-RELEASE, 6.1-RELEASE, 6.0-RELEASE with generic kernel. >Description: Something seems to be seriously messed up with the handling/detection of optical disc drives in the 6.x series of FreeBSD (at least on intel PII/PIII type hardware configurations). I discovered this a few weeks ago when I tried to update a FreeBSD 5.4 system to 6.2R. This is a VIA chipset Slot-1 PIII/800 system, with two 40 pin ide connectors integrated on the motherboard. The system supports UATA133 mode with 80 wire cables. I have my 80 Gigabyte Samsung harddisk on primary-master and there is no device installed for primary-slave (an empty mobile rack is connected). Secondary-master is a Pioneer DVD-ROM (read only) and secondary-slave is an older 52x speed LG CD-ROM (also read only). I had absolutely no problems under my old FreeBSD 5.4, but when I tried to install 6.2R I had to realize that my DVD drive is not detected. I asked help in comp.unix.bsd.freebsd.misc but no reply arrived for weeks, so I am reporting this as a defect. Please see my included dmesg outputs from various systems and see how they detect the two optical drives! All these dmesg outputs were generated on the same day and on the same hardware using the default (GENERIC) minimal install, with the only difference being the disk or partition (slice) where the actual test system was installed and run from. * FreeBSD 4.11R identifies both the DVD-ROM and the CD-ROM fine. I was able to do the installation from the DVD-ROM as acd0. * FreeBSD 5.5R identifies both the DVD-ROM and the CD-ROM fine. I was able to do the installation from the DVD-ROM as acd0. * FreeBSD 6.2R could not identify the DVD-ROM, but it identified the CD-ROM as acd0. The install CD did boot from the DVD drive and the first few steps of the installation seem to work, up until I select installation media as CD/DVD. After newfs running on the disk, reading selected packages from source fails. Interestingly, it also fails if I move the installation CD from the DVD drive (which was not detected by the system) to the CD-ROM drive (which is supposed to be acd0). The test system had to be installed via FTP. * FreeBSD 6.1R and FreeBSD 6.0R both behave the same way as 6.2R. None of the 6.x series "see" the DVD-ROM drive, and they set the CD-ROM as acd0. Another system, an IBM Netfinity 5000 server with dual Slot-1 PIII/500 also suffers from this defect. Hence the assumption that it may be related to PII/PIII era systems. The Netfinity 5000 has only one integrated 40 pin IDE connector with an old-rubbish CD-ROM (read only), connected as master. The disks are all SCSI disks using the integrated Adaptec adapter. When I boot from the FreeBSD 6.2R install CD the CD-ROM drive does not show up in dmesg, no acd0, therefore installation from CD is not possible. Again, this also boots from the CD and gets to the main installation menu, but because no acd0 is detected installation from CD doesn't work. However, boot CDs of Linux, NetBSD and OpenBSD (4.1) nicely detect the CD-ROM, as well as FreeBSD 4.11R. Since this optical drive issue is working fine with 4.11R and 5.5R but not working with 6.0R, 6.1R and 6.2R, I assume that there is a little screw-up in the 6.x series. It would be nice to see this fixed in the upcoming 6.3R ! ##### FreeBSD 4.11-RELEASE (generic) dmesg: ------------------------------------------- Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.11-RELEASE #0: Fri Jan 21 17:21:22 GMT 2005 root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Intel Pentium III (800.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff real memory = 805240832 (786368K bytes) avail memory = 777486336 (759264K bytes) Preloaded elf kernel "kernel" at 0xc055c000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fddf0 npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 agp0: mem 0xd8000000-0xd9ffffff at device 0.0 on pci0 pcib2: at device 1.0 on pci0 pci1: on pcib2 pci1: at 0.0 irq 11 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xe000-0xe00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xe400-0xe41f irq 12 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: ATEN International product 0x7000, class 9/0, rev 1.10/1.00, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: CHICONY HP Basic USB Keyboard, rev 1.10/3.00, addr 3, iclass 3/1 kbd1 at ukbd0 ums0: Genius NetScroll + Mini Traveler, rev 1.10/1.10, addr 4, iclass 3/1 ums0: 3 buttons and Z dir. uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 5 uhub2: 4 ports with 4 removable, self powered pci0: (vendor=0x1106, dev=0x3050) at 7.3 rl0: port 0xe800-0xe8ff mem 0xdd002000-0xdd0020ff irq 11 at device 8.0 on pci0 rl0: Ethernet address: 00:40:f4:64:4d:d5 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fwohci0: mem 0xdd000000-0xdd000fff irq 10 at device 9.0 on pci0 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:4c:01:07:00:30:e1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:00:4c:00:30:e1 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ahc0: port 0xec00-0xecff mem 0xdd001000-0xdd001fff irq 11 at device 12.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pcib1: on motherboard pci2: on pcib1 isa0: too many dependant configs (8) isa0: unexpected small tag 14 orm0: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fddf0 PCI-Only Interrupts: 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) ACPI timer: 0/3 0/6 0/3 0/3 0/3 1/1 0/5 0/3 0/3 0/3 -> 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x4010 acpi_button0: on acpi0 pcib0: port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.8.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.8.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.8.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.8.3 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.9.0 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.9.1 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.9.2 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.9.3 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.10.0 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.10.1 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.10.2 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.10.3 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.11.0 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.11.1 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.11.2 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.11.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.12.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.12.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.12.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.12.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.7.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.7.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.7.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.7.3 \\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+ low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+ low,level,sharable 0.1.1 \\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+ low,level,sharable 0.1.2 \\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 12+ low,level,sharable 0.1.3 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d8000000, size 25, enabled found-> vendor=0x1106, dev=0x0691, revid=0x44 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x8598, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0596, revid=0x23 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000e000, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x10 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e400, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 \\_SB_.PCI0.LNKB (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 \\_SB_.PCI0.LNKC (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 \\_SB_.PCI0.LNKD (references 7, priority 145173): interrupts: 11 10 5 12 7 6 4 3 15 14 1 penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280 pcib0: slot 7 INTD routed to irq 12 via \\_SB_.PCI0.LNKD found-> vendor=0x1106, dev=0x3038, revid=0x11 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=12 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3050, revid=0x30 bus=0, slot=7, func=3 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 1, range 32, base dd002000, size 8, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LNKA) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKA (references 7, priority 147178): interrupts: 11 10 5 7 6 4 3 12 15 14 1 penalty: 560 560 610 5560 5560 5560 5560 5630 50560 50560100560 \\_SB_.PCI0.LNKB (references 7, priority 147178): interrupts: 11 10 5 7 6 4 3 12 15 14 1 penalty: 560 560 610 5560 5560 5560 5560 5630 50560 50560100560 \\_SB_.PCI0.LNKC (references 7, priority 147178): interrupts: 11 10 5 7 6 4 3 12 15 14 1 penalty: 560 560 610 5560 5560 5560 5560 5630 50560 50560100560 pcib0: slot 8 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dd000000, size 12, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKB) pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKB (references 7, priority 149182): interrupts: 10 5 11 7 6 4 3 12 15 14 1 penalty: 840 890 910 5840 5840 5840 5840 5910 50840 50840100840 \\_SB_.PCI0.LNKC (references 7, priority 149182): interrupts: 10 5 11 7 6 4 3 12 15 14 1 penalty: 840 890 910 5840 5840 5840 5840 5910 50840 50840100840 pcib0: slot 9 INTA routed to irq 10 via \\_SB_.PCI0.LNKB found-> vendor=0x1033, dev=0x00e7, revid=0x01 bus=0, slot=9, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000ec00, size 8, enabled map[14]: type 1, range 32, base dd001000, size 12, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 12 INTA is already routed to irq 11 found-> vendor=0x9004, dev=0x8178, revid=0x00 bus=0, slot=12, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 agp0: mem 0xd8000000-0xd9ffffff at device 0.0 on pci0 agp0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xd8000000 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xda000000-0xdbffffff pcib1: prefetched decode 0xd0000000-0xd7ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xd0000000-0xd7ffffff map[14]: type 4, range 32, base 0000d000, size 8, enabled pcib1: device (null) requested decoded I/O range 0xd000-0xd0ff map[18]: type 1, range 32, base db000000, size 16, enabled pcib1: device (null) requested decoded memory range 0xdb000000-0xdb00ffff pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 1 INTA is already routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc ata1: [MPSAFE] uhci0: port 0xe400-0xe41f irq 12 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 7.3 (no driver attached) re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800 rl0: port 0xe800-0xe8ff mem 0xdd002000-0xdd0020ff irq 11 at device 8.0 on pci0 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:40:f4:64:4d:d5 rl0: [MPSAFE] fwohci0: mem 0xdd000000-0xdd000fff irq 10 at device 9.0 on pci0 fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdd000000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:4c:01:07:00:30:e1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:00:4c:00:30:e1 fwe0: bpf attached fwe0: Ethernet address: 02:00:4c:00:30:e1 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ahc0: port 0xec00-0xecff mem 0xdd001000-0xdd001fff irq 11 at device 12.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00 ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable is present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 449 instructions downloaded ahc0: Features 0x10005, Bugs 0x25, Flags 0x20481540 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs acpi_tz0: on acpi0 fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x401 0x411 0x401 0x401 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0x401 0x409 0x401 0x401 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 CTL0045: start dependent (0) CTL0045: adding irq mask 0x20 CTL0045: adding dma mask 0x2 CTL0045: adding dma mask 0x20 CTL0045: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0045: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: start dependent (2) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x10 CTL0045: adding io range 0x388-0x397, size=0x4, align=0x4 CTL0045: end dependent CTL7002: start dependent (0) CTL7002: adding io range 0x200-0x207, size=0x8, align=0x1 CTL7002: start dependent (1) CTL7002: adding io range 0x200-0x20f, size=0x8, align=0x8 CTL7002: end dependent CTL0022: start dependent (0) CTL0022: adding io range 0x620-0x623, size=0x4, align=0x1 CTL0022: start dependent (1) CTL0022: adding io range 0x620-0x683, size=0x4, align=0x20 CTL0022: end dependent ex_isa_identify() unknown: status reg test failed fe unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xd4000-0xdafff,0xd0000-0xd3fff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 27 7e 4f 4f 82 51 03 b8 1f 00 4f 0e 0f 00 00 07 80 90 03 8f 28 1f 8f b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 27 7e 4f 4f 82 51 03 b8 1f 00 4f 0e 0f 00 00 07 80 90 03 8f 28 1f 8f b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Failing probe. unknown: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Jan 12 2007 10:40:02) npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fddf0 PCI-Only Interrupts: 10 11 12 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd3c57000 pa 0x9e000 ACPI timer: 0/3 0/5 0/3 1/1 0/3 0/3 0/5 0/3 0/3 0/3 -> 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 12 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 12 N 0 1 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x4010 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0 ACPI: Found matching pin for 0.8.INTA at func 0: 11 ACPI: Found matching pin for 0.9.INTA at func 0: 10 ACPI: Found matching pin for 0.12.INTA at func 0: 11 ACPI: Found matching pin for 0.7.INTD at func 2: 12 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1106, dev=0x0691, revid=0x44 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base d8000000, size 25, enabled found-> vendor=0x1106, dev=0x8598, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0596, revid=0x23 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0571, revid=0x10 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e000, size 4, enabled found-> vendor=0x1106, dev=0x3038, revid=0x11 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=12 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000e400, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0) pcib0: slot 7 INTD routed to irq 12 via \\_SB_.PCI0.LNKD found-> vendor=0x1106, dev=0x3050, revid=0x30 bus=0, slot=7, func=3 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 1, range 32, base dd002000, size 8, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 8 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x1033, dev=0x00e7, revid=0x01 bus=0, slot=9, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dd000000, size 12, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKB:0) pcib0: slot 9 INTA routed to irq 10 via \\_SB_.PCI0.LNKB found-> vendor=0x9004, dev=0x8178, revid=0x00 bus=0, slot=12, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000ec00, size 8, enabled map[14]: type 1, range 32, base dd001000, size 12, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 12 INTA routed to irq 11 via \\_SB_.PCI0.LNKA agp0: mem 0xd8000000-0xd9ffffff at device 0.0 on pci0 agp0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xd8000000 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xda000000-0xdbffffff pcib1: prefetched decode 0xd0000000-0xd7ffffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base d0000000, size 27, enabled pcib1: (null) requested memory range 0xd0000000-0xd7ffffff: good map[14]: type 4, range 32, base 0000d000, size 8, enabled pcib1: (null) requested I/O range 0xd000-0xd0ff: in range map[18]: type 1, range 32, base db000000, size 16, enabled pcib1: (null) requested memory range 0xdb000000-0xdb00ffff: good pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKA pcib1: slot 0 INTA is routed to irq 11 pci1: at device 0.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc ata1: [MPSAFE] uhci0: port 0xe400-0xe41f irq 12 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 7.3 (no driver attached) re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800 rl0: port 0xe800-0xe8ff mem 0xdd002000-0xdd0020ff irq 11 at device 8.0 on pci0 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:40:f4:64:4d:d5 rl0: [MPSAFE] fwohci0: mem 0xdd000000-0xdd000fff irq 10 at device 9.0 on pci0 fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdd000000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:4c:01:07:00:30:e1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:00:4c:00:30:e1 fwe0: bpf attached fwe0: Ethernet address: 02:00:4c:00:30:e1 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ahc0: port 0xec00-0xecff mem 0xdd001000-0xdd001fff irq 11 at device 12.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00 ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable is present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 449 instructions downloaded ahc0: Features 0x10005, Bugs 0x25, Flags 0x20481540 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs acpi_tz0: on acpi0 fdc0: port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x401 0x411 0x401 0x401 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0x401 0x409 0x401 0x401 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: status reg test failed fe unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 CTL0045: start dependent (0) CTL0045: adding irq mask 0x20 CTL0045: adding dma mask 0x2 CTL0045: adding dma mask 0x20 CTL0045: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0045: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0045: start dependent (1) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: start dependent (2) CTL0045: adding irq mask 0x6a0 CTL0045: adding dma mask 0xb CTL0045: adding dma mask 0xe0 CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0045: adding io range 0x300-0x331, size=0x2, align=0x10 CTL0045: adding io range 0x388-0x397, size=0x4, align=0x4 CTL0045: end dependent CTL7002: start dependent (0) CTL7002: adding io range 0x200-0x207, size=0x8, align=0x1 CTL7002: start dependent (1) CTL7002: adding io range 0x200-0x20f, size=0x8, align=0x8 CTL7002: end dependent CTL0022: start dependent (0) CTL0022: adding io range 0x620-0x623, size=0x4, align=0x1 CTL0022: start dependent (1) CTL0022: adding io range 0x620-0x683, size=0x4, align=0x20 CTL0022: end dependent PNP Identify complete ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff,0xd0000-0xd3fff,0xd4000-0xdafff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: