Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 26 Sep 06 13:06:15 PDT
From:      perryh@pluto.rain.com (Perry Hutchison)
To:        freebsd-questions@freebsd.org
Subject:   <PNP0xxx> can't assign resources
Message-ID:  <10609262006.AA18193@pluto.rain.com>

Next in thread | Raw E-Mail | Index | Archive | Help
Do I need to do anything about these lines near the end
of the dmesg?

  unknown: <PNP0c01> can't assign resources (memory)
  unknown: <PNP0501> can't assign resources (port)
  unknown: <PNP0501> can't assign resources (port)
  unknown: <PNP0401> can't assign resources (port)
  unknown: <PNP0700> can't assign resources (port)
  unknown: <PNP0f13> can't assign resources (irq)
  unknown: <PNP0303> can't assign resources (port)

The box is a Dell Optiplex GX1, and it does seem to be working OK,
but I suppose this may indicate that something is not configured
properly.

========================== complete dmesg ==========================

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #3: Mon Sep 25 21:49:18 PDT 2006
    perryh@fbsd61:/usr/src/sys/i386/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (447.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 201326592 (192 MB)
avail memory = 187494400 (178 MB)
kbd1 at kbdmux0
cpu0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xcce0-0xccff irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 15.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <simple comms, generic modem> at device 9.0 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xff000000-0xff00007f irq 11 at device 17.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:b0:d0:28:ad:4f
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
Timecounter "TSC" frequency 447691600 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 157066MB <HDT722516DLAT80 V43OA96A> at ata0-master UDMA33
acd0: CDROM <CRD-8400B/1.06> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s3a



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?10609262006.AA18193>