Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Dec 2006 10:05:04 -0500
From:      Lowell Gilbert <freebsd-questions-local@be-well.ilk.org>
To:        "Steve Franks" <stevefranks@ieee.org>
Cc:        FreeBSD Users Questions <freebsd-questions@freebsd.org>
Subject:   Re: freebsd on i386-type internet appliance and cf card
Message-ID:  <44wt4dxtun.fsf@be-well.ilk.org>
In-Reply-To: <539c60b90612221350t77ca840u56ddd68943a8b57c@mail.gmail.com> (Steve Franks's message of "Fri, 22 Dec 2006 14:50:46 -0700")
References:  <539c60b90612221350t77ca840u56ddd68943a8b57c@mail.gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
"Steve Franks" <stevefranks@ieee.org> writes:

> So, I've installed freebsd on a compact flash card sucessfully in my laptop
> (or so it looks - sysinstall completes to /dev/ad4, copies everything, no
> errors, etc) with the regular harddisk removed (for safety, of course).
>
> Only it won't boot on the internet appliance when I stick the CF in there
> (that's it's only supported boot device).  I get the F1 - Freebsd bootloader
> prompt, then nothing more.  I let it sit for a good 10 min, just to be sure.
>
> It's a i386 compatible processor, and people have sucessfully run at least 3
> flavors of linux on it, as well as win98 from what I can glean on the net.
>
> If I restart sysinstall, I can see the partition was written, but I can't
> mount it from a running bsd machine - "incorrect superblock", which I think
> has to do with the following (aka. all or dd partitions):
>
> I tried 'all three' modes of partition - "create", "all", and "DD".  Each
> time sysinstall completes, each time F1 - freebsd, but nothing more.
>
> Used 'auto' on the label editor - the defaults seemed reasonable...
>
> Thoughts?

It doesn't sound like the system hardware is relevant; I think the
card isn't sufficiently installed to boot anywhere.  Also, you should
be able to do without the bootloader menu (although it shouldn't hurt
anything).  

Perhaps it's just a matter of the root device being wrong?  You might
need to set root_disk_unit (or rootdev or currdev) for the loader.



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?44wt4dxtun.fsf>