From owner-freebsd-bugs Fri Mar 17 16:48:53 2000 Delivered-To: freebsd-bugs@freebsd.org Received: from granger.mail.mindspring.net (granger.mail.mindspring.net [207.69.200.148]) by hub.freebsd.org (Postfix) with ESMTP id D284437B8C6 for ; Fri, 17 Mar 2000 16:48:45 -0800 (PST) (envelope-from ardoin@mindspring.com) Received: from mindspring.com (user-2ivek0n.dialup.mindspring.com [165.247.80.23]) by granger.mail.mindspring.net (8.9.3/8.8.5) with ESMTP id TAA15452; Fri, 17 Mar 2000 19:48:32 -0500 (EST) Message-ID: <38D2D2AD.D00EC58A@mindspring.com> Date: Fri, 17 Mar 2000 19:49:49 -0500 From: Cy Ardoin X-Mailer: Mozilla 4.61 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: "Matthew N. Dodd" Cc: Soren Schmidt , freebsd-bugs@FreeBSD.ORG Subject: Re: HPT 366 on ABIT BE6 References: Content-Type: multipart/mixed; boundary="------------315826E6BB5C0E3D9DDD1872" Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org This is a multi-part message in MIME format. --------------315826E6BB5C0E3D9DDD1872 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Yep, it was the AHA-2920 on irq 11. I just removed it and there is no change in the behavior. When I access the HPT drive it locks up on command timeout, resetting drives... Yell if there is any additional debugging I can help with in the code. I have no problem mucking kernel code, i've done it for years. Thanks Cy I attached the "verbose" boot info with the rogue SCSI card removed. "Matthew N. Dodd" wrote: > On Fri, 17 Mar 2000, Soren Schmidt wrote: > > > pci0: (vendor=0x1036, dev=0x0000) at 11.0 irq 11 > > > > I dont like this, what is this ? > > (Vendor) > { 0x1036, "FDomain", "Future Domain" } , > (Vendor/Device Id) > { 0x1036, 0x0000, "TMC-18C30", "" } , > > -- > | Matthew N. Dodd | '78 Datsun 280Z | '75 Volvo 164E | FreeBSD/NetBSD | > | winter@jurai.net | 2 x '84 Volvo 245DL | ix86,sparc,pmax | > | http://www.jurai.net/~winter | This Space For Rent | ISO8802.5 4ever | --------------315826E6BB5C0E3D9DDD1872 Content-Type: text/plain; charset=us-ascii; name="verbose2.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="verbose2.txt" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-STABLE #1: Wed Mar 15 14:31:08 EST 2000 root@blackwater.mindspring.com:/usr/src/sys/compile/CY Calibrating clock(s) ... TSC clock: 501169629 Hz, i8254 clock: 1193261 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383f9ff real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003d7000 - 0x07ff7fff, 130158592 bytes (31777 pages) avail memory = 126259200 (123300K bytes) bios32: Found BIOS32 Service Directory header at 0xc00faf90 bios32: Entry = 0xfb410 (c00fb410) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb440 pnpbios: Found PnP BIOS data at 0xc00fc010 pnpbios: Entry = f0000:c038 Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc03be000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e8000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=10 map[20]: type 1, range 32, base 0000d000, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00005000, size 4 found-> vendor=0x8086, dev=0x1229, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base f0100000, size 12 map[14]: type 1, range 32, base 0000d400, size 5 map[18]: type 1, range 32, base f0000000, size 20 found-> vendor=0x1103, dev=0x0004, revid=0x01 class=01-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000d800, size 3 map[14]: type 1, range 32, base 0000dc00, size 2 map[20]: type 1, range 32, base 0000e000, size 8 found-> vendor=0x1103, dev=0x0004, revid=0x01 class=01-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base 0000e400, size 3 map[14]: type 1, range 32, base 0000e800, size 2 map[20]: type 1, range 32, base 0000ec00, size 8 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x10de, dev=0x0101, revid=0x10 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base ec000000, size 24 map[14]: type 1, range 32, base e0000000, size 27 pci1: on pcib1 pci1: (vendor=0x10de, dev=0x0101) at 0.0 irq 10 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=01 status0=00 status1=ff ata1: mask=01 status0=00 status1=ff ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 pci0: (vendor=0x8086, dev=0x7112) at 7.2 irq 10 chip1: port 0x5000-0x500f at device 7.3 on pci0 fxp0: port 0xd400-0xd41f mem 0xf0000000-0xf00fffff,0xf0100000-0xf0100fff irq 10 at device 9.0 on pci0 fxp0: Ethernet address 00:a0:c9:32:3c:4f fxp0: supplying EUI64: 00:a0:c9:ff:fe:32:3c:4f bpf: fxp0 attached atapci1: port 0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0 ata2: iobase=0xd800 altiobase=0xdc00 bmaddr=0xe000 ata2: mask=03 status0=50 status1=01 ata2: mask=03 status0=50 status1=01 ata2: devices = 0x3 ata2: at 0xd800 on atapci1 atapci2: port 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 11 at device 19.1 on pci0 devclass_alloc_unit: ata2 already exists, using next available unit number ata3: iobase=0xe400 altiobase=0xe800 bmaddr=0xec00 ata3: mask=03 status0=50 status1=01 ata3: mask=03 status0=50 status1=01 ata3: devices = 0x3 ata3: at 0xe400 on atapci2 using shared irq11. Trying Read_Port at 203 Trying Read_Port at 243 CTL0031: start dependant CTL0031: adding irq mask 0x20 CTL0031: adding dma mask 0x2 CTL0031: adding dma mask 0x20 CTL0031: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0031: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0xca0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: end dependant PNPffff: adding io range 0x100-0x3f8, size=0x1, align=0x8 CTL0021: start dependant CTL0021: adding io range 0x620-0x623, size=0x4, align=0x1 CTL0021: start dependant CTL0021: adding io range 0x620-0x683, size=0x4, align=0x20 CTL0021: end dependant CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1 CTL0051: adding io range 0x100-0x3f8, size=0x1, align=0x8 USR1001: adding irq mask 0x2b8 USR1001: start dependant USR1001: adding io range 0x110-0x117, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x170-0x177, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x210-0x217, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x270-0x277, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x2f0-0x2f7, size=0x8, align=0x1 USR1001: start dependant USR1001: adding io range 0x370-0x377, size=0x8, align=0x1 USR1001: end dependant devclass_alloc_unit: ata0 already exists, using next available unit number devclass_alloc_unit: ata1 already exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: not probed (disabled) sio0: irq maps: 0x61 0x71 0x61 0x61 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x61 0x69 0x61 0x61 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: HP ENHANCED PCL5,PJL ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 bpf: lp0 attached isa_probe_children: probing PnP devices unknown0: