Date: Sun, 20 Jun 2004 12:45:57 +1000 From: Jason Oakley <waulok@bangrocks.com> To: Scott Mitchell <scott+freebsd@fishballoon.org> Cc: freebsd-questions@freebsd.org Subject: Re: Mounting a multicard reader (FBSD) Message-ID: <6.1.0.6.0.20040620124105.01c4e8a0@mail.bangrocks.com> In-Reply-To: <20040619153131.GA462@tuatara.fishballoon.org> References: <6.1.0.6.0.20040619191803.01dafa20@mail.bangrocks.com> <200406190745.29010.algould@datawok.com> <20040619153131.GA462@tuatara.fishballoon.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I set up automount, but that's not working.
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
I also get this after a reboot now:
umass0: vendor 0x55aa 8-in-2, rev 1.10/1.01, addr 3
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
I can't mount by hand now. I don't know if that has to do with the automounter:
$ sudo mount -t msdos /dev/da0s1 /mnt/CF
Just sits there doing nothing.
$ sudo truss mount -t msdos /dev/da0s1 /mnt/CF
readlink("/etc/malloc.conf",0xbfbff960,63) ERR#2 'No such file or
directory'
mmap(0x0,4096,0x3,0x1002,-1,0x0) = 671555584 (0x28072000)
break(0x807b000) = 0 (0x0)
break(0x807c000) = 0 (0x0)
lstat("/mnt",0xbfbfee30) = 0 (0x0)
lstat("/mnt/CF",0xbfbfee30) = 0 (0x0)
readlink("/mnt/CF","/host/localhost/CF",1023) = 18 (0x12)
lstat("/host",0xbfbfee30) = 0 (0x0)
lstat("/host/localhost",0xbfbfee30) = 0 (0x0)
stalls there
More of the same:
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
nfs server pid110@spooty:/host: not responding
umass0: BBB reset failed, STALLED
umass0: BBB bulk-in clear stall failed, STALLED
umass0: BBB bulk-out clear stall failed, STALLED
At 01:31 AM 20/06/2004, Scott Mitchell wrote:
>What does 'camcontrol devlist' say? Probably it will just list one device
>(da0) that - as you've found - corresponds with the CF slot on your card
>reader. The other slots are probably mapped to other LUNs (Logical Unit
>Numbers) on the same SCSI device number. The CAM framework only probes LUN
>0 by default, so you only see the first slot. For example, when my machine
>boots, I have:
---------------------------------------------------------------------------------
http://www.bangrocks.com/ - http://www.auspug.org/
http://www.ZigZagSoft.com/ - PalmOS Software and "Palm Games Programming" forum
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.1.0.6.0.20040620124105.01c4e8a0>