Date: Wed, 12 Jan 2005 15:42:51 +0100 From: Marco Trentini <mark@remotelab.org> To: freebsd-multimedia@freebsd.org Subject: some questions about bktr 878 and fxtv Message-ID: <20050112144251.GA976@einstein.lab>
next in thread | raw e-mail | index | archive | help
--lrZ03NoBR/3+SXJZ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi all, I have one winTV hauppauge card but it refuses to work in my freebsd box. The card ships with bt878 chipset but I'm not able to catch out which tuner it has on board (I've tried to disassemble it without result). I live in italy, so the tuner should be a PAL tuner (as reported by the sticker on the card). I've enabled it with bktr_load="YES" in loader.conf in my FreeBSD 6.0-CURRENT (firts Jan). The relevant dmesg lines are: bktr_mem: memory holder loaded bktr0: <BrookTree 878> mem 0xd7000000-0xd7000fff irq 11 at device 13.0 on pci0 bktr0: [GIANT-LOCKED] bktr0: Hauppauge Model 29440 @ % bktr0: Warning - Unknown Hauppauge Tuner 0x58 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. I marvel at the last line (NTSC tuner). So, after I've set sysctl hw.bt848.card=2 (hauppauge card), I've played with hw.bt848.tuner sysctl, trying all PAL value and running: fxtv -inputFormat palbdghi -tunerMode antenna -defaultInput tuner -antennaFreqSet weurope The app runs but I see only fuzzy lines. Any suggestions? In attachment my dmesg.boot. Thanks. -- Marco Trentini mark@remotelab.org http://www.remotelab.org/ --lrZ03NoBR/3+SXJZ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Sun Jan 9 14:43:16 CET 2005 root@einstein.lab:/usr/obj/usr/src/sys/EINSTEIN WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(TM) XP 2500+ (1826.03-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 1073725440 (1023 MB) avail memory = 1037795328 (989 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 10 Entries> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <GeForce4 Ti 4200 with AGP8X> mem 0xd8000000-0xdfffffff,0xd5000000-0xd5ffffff irq 11 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xd4800000-0xd4801fff irq 9 at device 9.0 on pci0 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:e0:18:fe:8f:5c bfe0: [GIANT-LOCKED] fwohci0: <Texas Instruments TSB12LV26> mem 0xd3800000-0xd3803fff,0xd4000000-0xd40007ff irq 9 at device 11.0 on pci0 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:30:95:26:50:00:a2:d3 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci0: <multimedia, video> at device 13.0 (no driver attached) pci0: <multimedia> at device 13.1 (no driver attached) pcm0: <Creative EMU10K1> port 0xd800-0xd81f irq 10 at device 14.0 on pci0 pcm0: <SigmaTel STAC9708/11 AC97 Codec> uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 9 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd3000000-0xd30000ff irq 9 at device 16.3 on pci0 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <VIA VT6202 USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: single transaction translator uhub3: 6 ports with 6 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0xb000-0xb00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 cpu0 on motherboard orm0: <ISA Option ROM> at iomem 0xd0000-0xd4fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 joy0 at port 0x201 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <Hewlett-Packard HP LaserJet 3330> PRINTER PJL,MLC,PCL,POSTSCRIPT,PCLXL lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A speaker0: <PC speaker> at port 0x61 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) speaker1: <PC speaker> at port 0x61 on isa0 speaker1: Already attached! device_attach: speaker1 attach returned 6 Timecounter "TSC" frequency 1826025870 Hz quality 800 Timecounters tick every 1.333 msec ipfw2 initialized, divert loadable, rule-based forwarding enabled, default to deny, logging limited to 500 packets/entry by default ad0: 78533MB <IC35L080AVVA07-0/VA4OA52A> [159560/16/63] at ata0-master UDMA100 ad1: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-slave UDMA133 ata1-slave: DMA limited to UDMA33, non-ATA66 cable or device acd0: CDRW <ASUS CRW-5224A/1.20> at ata1-master UDMA33 acd1: DVDROM <ASUS DVD-ROM E616/2.1> at ata1-slave UDMA33 ums0: at uhub0 port 1 (addr 2) disconnected ums0: detached ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. Trying to mount root from ufs:/dev/ad0s1a WARNING: driver "vmmon" used unreserved major device number 200 vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $ vmmon: Module vmmon: initialized vmnet1: Ethernet address: 00:bd:ab:3f:00:01 vmmon: Vmx86_ReleaseVM: unlocked pages: 161346, unlocked dirty pages: 126605 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...3 3 3 0 0 0 done All buffers synced. Uptime: 32m27s Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Sun Jan 9 14:43:16 CET 2005 root@einstein.lab:/usr/obj/usr/src/sys/EINSTEIN WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(TM) XP 2500+ (1826.03-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 1073725440 (1023 MB) avail memory = 1037795328 (989 MB) bktr_mem: memory holder loaded npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 10 Entries> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <GeForce4 Ti 4200 with AGP8X> mem 0xd8000000-0xdfffffff,0xd5000000-0xd5ffffff irq 11 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xd4800000-0xd4801fff irq 9 at device 9.0 on pci0 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:e0:18:fe:8f:5c bfe0: [GIANT-LOCKED] fwohci0: <Texas Instruments TSB12LV26> mem 0xd3800000-0xd3803fff,0xd4000000-0xd40007ff irq 9 at device 11.0 on pci0 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:30:95:26:50:00:a2:d3 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) bktr0: <BrookTree 878> mem 0xd7000000-0xd7000fff irq 11 at device 13.0 on pci0 bktr0: [GIANT-LOCKED] bktr0: Hauppauge Model 29440 @ % bktr0: Warning - Unknown Hauppauge Tuner 0x58 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. pci0: <multimedia> at device 13.1 (no driver attached) pcm0: <Creative EMU10K1> port 0xd800-0xd81f irq 10 at device 14.0 on pci0 pcm0: <SigmaTel STAC9708/11 AC97 Codec> uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 9 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd3000000-0xd30000ff irq 9 at device 16.3 on pci0 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <VIA VT6202 USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: single transaction translator uhub3: 6 ports with 6 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0xb000-0xb00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 cpu0 on motherboard orm0: <ISA Option ROM> at iomem 0xd0000-0xd4fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 joy0 at port 0x201 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <Hewlett-Packard HP LaserJet 3330> PRINTER PJL,MLC,PCL,POSTSCRIPT,PCLXL lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A speaker0: <PC speaker> at port 0x61 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) speaker1: <PC speaker> at port 0x61 on isa0 speaker1: Already attached! device_attach: speaker1 attach returned 6 Timecounter "TSC" frequency 1826027410 Hz quality 800 Timecounters tick every 1.333 msec ipfw2 initialized, divert loadable, rule-based forwarding enabled, default to deny, logging limited to 500 packets/entry by default ad0: 78533MB <IC35L080AVVA07-0/VA4OA52A> [159560/16/63] at ata0-master UDMA100 ad1: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-slave UDMA133 ata1-slave: DMA limited to UDMA33, non-ATA66 cable or device acd0: CDRW <ASUS CRW-5224A/1.20> at ata1-master UDMA33 acd1: DVDROM <ASUS DVD-ROM E616/2.1> at ata1-slave UDMA33 ums0: at uhub0 port 1 (addr 2) disconnected ums0: detached ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. Trying to mount root from ufs:/dev/ad0s1a --lrZ03NoBR/3+SXJZ--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050112144251.GA976>