Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 23 Nov 1999 01:37:22 -0500 (EST)
From:      Greg Skouby <gskouby@ns0.sitesnow.com>
To:        Greg Lehey <grog@lemis.com>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: vinum raid5 spontaneous reboots
Message-ID:  <Pine.BSF.4.10.9911230132560.85383-100000@ns0.sitesnow.com>
In-Reply-To: <19991122095413.53903@mojave.sitaranetworks.com>

next in thread | previous in thread | raw e-mail | index | archive | help


On Mon, 22 Nov 1999, Greg Lehey wrote:

> > Every couple of hours I the machines will spontaneously reboot, leaving me
> > with nothing in /var/log/messages. I am not positive this is because of
> > the vinum setup but I don't think it happened when the vinum setup was not
> > there. Is there anyway I can further debug this? Thanks..bye
> 
> Well, you could start by reading http://www.lemis.com/vinum/bugs.html
> and http://www.lemis.com/vinum/how-to-debug.html.  There you will read
> that you should update Vinum to 3.3-STABLE.  Then a few details of
> what you've done so far would help, for example, what configuration do
> you have?  You suggest that you have had problems setting up your
> configuration, which may also mean that your configuration is faulty.

Hello,
	I have a couple of stupid questions for you, and I do appreciate
you helping me/all of us up to this point. This is my config file:
  drive a device /dev/da0h
  drive b device /dev/da1h
  drive c device /dev/da2h
  drive d device /dev/da3h
  volume raid5
    plex org raid5 512k
      sd length 22129m  drive a
      sd length 22129m  drive b
      sd length 22129m  drive c
      sd length 22129m  drive d

Everything seems to be working fine except for the reboots every once and
a while. Also, you said update vinum to 3.3-STABLE. Where should I get
that from? ftp.lemis.com/pub/vinum does not have the 3.3-stable version as
far as I can see. Thank you very much for all of your help..bye




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9911230132560.85383-100000>