Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 25 Sep 2008 07:03:21 +0200
From:      Goran Lowkrantz <goran.lowkrantz@ismobile.com>
To:        "Andrey V. Elsukov" <bu7cher@yandex.ru>
Cc:        FreeBSD Mailing List <freebsd-stable@freebsd.org>, Joseph Olatt <joji@eskimo.com>, =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@FreeBSD.org>
Subject:   Re: unsupported NVIDIA SATA controller
Message-ID:  <47774185B9D9E55501044276@[10.255.253.2]>

next in thread | raw e-mail | index | archive | help
Hi,

FYI, I have added your patch on an MCP67 of an ASUS M2N-VM DVI motherboard=20
and it's been up for about a day, dmesg looks OK and it survived the backup =

of its managed disks. So, unless you hear more from me, it worked.

FreeBSD midgard.glz.hidden-powers.com 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE =

#1: Tue Sep 23 19:57:47 CEST 2008=20
root@midgard.glz.hidden-powers.com:/usr/obj/usr/src/sys/MIDGARD  amd64

00:09.0 IDE interface [0101]: nVidia Corporation MCP67 AHCI Controller=20
[10de:0550] (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82b3]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- =

Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort-=20
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at c480
        Region 1: I/O ports at c400
        Region 2: I/O ports at c080
        Region 3: I/O ports at c000
        Region 4: I/O ports at bc00
        Region 5: Memory at dfcfa000 (32-bit, non-prefetchable)
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA=20
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
        Capabilities: [8c] SATA HBA <?>

Cheers,
	Goran

--On Tuesday, September 23, 2008 09:11 +0400 "Andrey V. Elsukov"=20
<bu7cher@yandex.ru> wrote:

> Joseph Olatt wrote:
>>>> none13@pci0:0:14:0:     class=3D0x010485 card=3D0x01371025 =
chip=3D0x07f810de
>>>> rev=3D0xa2 hdr=3D0x00 vendor     =3D 'Nvidia Corp'
>>>>     class      =3D mass storage
>>>>     subclass   =3D RAID
>>> Do you still have this problem?
>>> It seems that your controller is AHCI-capable.
>>> I can make a patch if is it needed.
>>
>> Yes, I'm still have the above problem. And, yes, the controller appears
>> to be ACHI-capable (at least according to Ubuntu. see [1])
>>
>> I would greatly appreciate a patch if you can provide one.
>>
>> regards,
>> joseph
>>
>>
>> [1]: http://www.eskimo.com/~joji/nvidia_sata/
>
> Hi, Joseph.
>
> Try attached patch.
>
> --
> WBR, Andrey V. Elsukov



................................................... the future isMobile

  Goran Lowkrantz <goran.lowkrantz@ismobile.com>
  System Architect, isMobile AB
  Sandviksgatan 81, PO Box 58, S-971 03 Lule=E5, Sweden
  Mobile: +46(0)70-587 87 82
http://www.ismobile.com ...............................................



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47774185B9D9E55501044276>