Date: Sat, 3 Jul 2010 10:40:51 -0700 From: "David Southwell" <david@vizion2000.net> To: "'Doug Barton'" <dougb@FreeBSD.org> Cc: freebsd-ports@freebsd.org Subject: RE: Redland compile error missing librdf Message-ID: <3290E0C31EEA4A018EBE945B0765D2DE@graphics> In-Reply-To: <49C017A16C5E418FB0D6503333660A01@graphics> References: <A6D8EA05FDD04FF3B97C610A8630E46B@graphics><4C2E5D38.1000104@FreeBSD.org> <49C017A16C5E418FB0D6503333660A01@graphics>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: owner-freebsd-ports@freebsd.org > [mailto:owner-freebsd-ports@freebsd.org] On Behalf Of David Southwell > Sent: 03 July 2010 04:29 > To: 'Doug Barton' > Cc: freebsd-ports@freebsd.org > Subject: RE: Redland compile error missing librdf > > > > > -----Original Message----- > > From: owner-freebsd-ports@freebsd.org > > [mailto:owner-freebsd-ports@freebsd.org] On Behalf Of Doug Barton > > Sent: 02 July 2010 14:42 > > To: david@vizion2000.net > > Cc: freebsd-ports@freebsd.org > > Subject: Re: Redland compile error missing librdf > > > > On 07/02/10 14:20, david@vizion2000.net wrote: > > > Hi > > > Thank you in advance for any solutions > > > > > > There seems to be a problem with Redland. When building > Soprano it > > > reports *Soprano components that will NOT be built: > > > *Redland storage backend (missing librdf/redland - > http://librdf.org > > > > You keep posting basically the same message over and over, > but you're > > ignoring the suggestions of the people who have told you > how to solve > > your problem. You need to do exactly this: > > > > Make sure that your ports tree is up to date pkg_delete -f > > redland* raptor* soprano* kdelibs* cd /var/db/ports && rm -rf > > redland* raptor* soprano* kdelibs* cd > /usr/ports/textproc/soprano && > > make clean && make install clean cd /usr/ports/x11/kdelibs4 && make > > clean && make install clean > > > > When building these ports you will be presented with > various blue and > > grey screens with options. Unless you know exactly what you're > > changing and why you're changing it, don't make any changes > to them, > > just accept the defaults (I.e., just hit <Tab> then <Enter>). > > > > If this doesn't work for you, repeat the whole process but for the > > last > > 2 steps where it says "make install clean" instead do this > both times: > > > > make -DDISABLE_MAKE_JOBS -DCMAKE_VERBOSE install clean > > > > and report what error messages you get. > > > > Please don't post any more messages about this topic until you've > > followed the steps above unless you have a question about how to > > follow the steps. > > > > > > Good luck, > > > > Doug > > > > -- > Hi Doug > > Thanks for your comments. I have already done those things > (see below one > example of my responses to the help received from Max) and posted the > results including an output of "make -DDISABLE_MAKE_JOBS > -DCMAKE_VERBOSE" > from the failed kdelibs4 build has been posted at > ftp.vizion2000.net/pub/compile_kdelibs4 > > Max has been good enough to look at that output and give me > his take upon it > (see ***example*** ). > > Since then I have again repeated all the steps you indicated > with no result. > As this is the first time you have tried to help I am not > surprised you do > not realise all the work that has gone before or that > everything you have > suggested has already been done multiple times. In the > circumstances your > stricture not to post any more on the topic seems out of > character with > previous very helpful & constructive contributions. > > I also note your instructions do differ from those suggested > by others which > did not include the sensible idea of removing relevant saved > configuration > options from /var/db. Max's postings suggested that redland & > raptor should > be deinstalled and rebuilt before compiling soprano and > kdelibs4. So maybe > there are conflicting ideas about this. Incidentally when > cleaning soprano > the console reports shows that the following files do not exist: > '/usr/local/lib/soprano/libsoprano_redlandbackend.so & > /usr/local/share/soprano/plugins/redlandbackend.desktop > > Possibly the problem has not been entirely solved not because > advised steps > have not been followed but maybe some, as yet unidentified factor, is > inhibiting that solution from working. > > However it is not all gloom and doom but the problem is not completely > solved. In the meanwhile I have mot been sitting back and > waiting for a > knight on a white charger to solve the issues. I have some > progess to report > but not enough to resolve the redland/soprano issues. > After > I deinstalled and made clean the following: > all kde ports > ImageMagick > GraphicsMagick > all qt4 ports > > I then followed Max's instructions: > "Rebuild redland\*, raptor\*, soprano\*, and then kdelibs." > but as raptor is now built as a dependency let the raptor > build happen that > way. pkg_info -o 'redland*' 'raptor*' 'soprano*' all showed > lastest versions > have been installed. > > kdelibs-4.4.5 then built!! > > However soprano reports had not changed. So the simple > posting was made to > focus attention on the error that still occurred AFTER all > recomendations > had been followed! > > "There seems to be a problem with Redland. When building Soprano it > > > reports *Soprano components that will NOT be built: > > > *Redland storage backend (missing librdf/redland - > http://librdf.org > " > > So the question remains -- why should this be? > > This affects kdegraphics4 where the build fails with: > > could not find Nepomuk (missing: NEPOMUK_LIBRARIES NEPOMUK_INCLUDE_DIR > SOPRANO_PLUGIN_REDLANDBACKEND_FOUND) > > . > . > stop in /usr/ports/graphics/kdegraphics4 > > > Thanks in advance for constructive comments > > david > > ___________________________________________________________________ > ***example*** > _________________________________________________________________ > > > -----Original Message----- > > From: owner-freebsd-ports@freebsd.org > > [mailto:owner-freebsd-ports@freebsd.org] On Behalf Of Max Brazhnikov > > Sent: 01 July 2010 04:57 > > To: david@vizion2000.net > > Cc: freebsd-ports@freebsd.org > > Subject: Re: kdelibs4 [4.4.5] compile failure for 4.4.4 repeated > > > > On Thu, 1 Jul 2010 03:52:33 -0700, david@vizion2000.net wrote: > > > Just attempting to rebuild kdelibs4 now. In the early part of the > > > compile there is a report (Summarised) saying > > > > > > "The following optional packages could NIOT be located on > > your system" > > > > > > Soprano (2.3.70 or higher) [pkg_info actually shows > soprano-2.4.3 > > > installed) > > > Soprano Redland Backend [How is this and the following > > two installed?} > > > > Have you rebuilt soprano as I suggested? > > Yes three times!! > > make sure you have > > not set WITHOUT_REDLAND in /var/db/ports/soprano/options or in > > make.conf > > > . > .(Stuff cut out) > . > > > > Something is wrong with your soprano installation. > soprano/options reads; > > Very weird - I have just rebuild akonadi and that finds > soprano without > difficulty!! After akonadi rebuild I tried again with > kdelibs4 and early in > the compile it still reports it cannot locate soprano. I am > waiting now to > see whether we get the same build failure. We do!! :-( > > > soprano/options reads; > _____________________________________________________ > # This file is auto-generated by 'make config' > # No user-serviceable parts inside! > # Options for soprano-2.4.3 > _OPTIONS_READ=soprano-2.4.3 > WITHOUT_SESAME2=true > _____________________________________________________ > > I have also tried compiling after choosing the make config > option to turn > sesame2 on. No other options are offered. > With the Makefile as is should Redland be turned on? > The Makefile reads: > > # New ports collection Makefile for: soprano > # Date created: 2008-01-18 > # Whom: arved > # > # $FreeBSD: ports/textproc/soprano/Makefile,v 1.11 2010/05/11 12:40:01 > fluffy Exp $ > > PORTNAME= soprano > PORTVERSION= 2.4.3 > CATEGORIES?= textproc > MASTER_SITES= SF/${PORTNAME}/Soprano/${PORTVERSION} > > MAINTAINER= kde@FreeBSD.org > COMMENT= QT4 RDF framework > > LIB_DEPENDS= clucene.0:${PORTSDIR}/textproc/clucene \ > raptor.3:${PORTSDIR}/textproc/raptor > > #OPTIONS+= REDLAND "Use Redland as storage backend > (required for KDE4)" > on > #OPTIONS+= VIRTUOSO "Use libiodbc/virtuoso as storage > backend (required > for KDE4)" on > OPTIONS+= SESAME2 "Use Sesame2 as storage backend > (requires Java)" off > > USE_BZIP2= yes > USE_QT_VER= 4 > QT_COMPONENTS= corelib dbus qtestlib network \ > qmake_build moc_build uic_build rcc_build > USE_GNOME= pkgconfig > USE_LDCONFIG= yes > USE_CMAKE= yes > > .include <bsd.port.options.mk> > > .if !defined(WITHOUT_REDLAND) > LIB_DEPENDS+= rdf.0:${PORTSDIR}/textproc/redland > PLIST_SUB+= REDLAND="" > .else > CMAKE_ARGS+= -DSOPRANO_DISABLE_REDLAND_BACKEND=yes > PLIST_SUB+= REDLAND="@comment " > .endif > > .if !defined(WITHOUT_VIRTUOSO) > LIB_DEPENDS+= iodbc.3:${PORTSDIR}/databases/libiodbc > PLIST_SUB+= VIRTUOSO="" > .else > CMAKE_ARGS+= -DSOPRANO_DISABLE_VIRTUOSO_BACKEND=yes > PLIST_SUB+= VIRTUOSO="@comment " > .endif > > .if defined(WITH_SESAME2) > CATEGORIES+= java > CMAKE_ENV+= JAVA_HOME=${JAVA_HOME} > USE_JAVA= yes > JAVA_VERSION= 1.5+ > JAVA_OS= native > PLIST_SUB+= SESAME2="" > .else > CMAKE_ARGS+= -DSOPRANO_DISABLE_SESAME2_BACKEND=yes > PLIST_SUB+= SESAME2="@comment " > .endif > > .include <bsd.port.pre.mk> > > post-patch: > ${REINPLACE_CMD} -E -e > "s,$${LIB_SUFFIX}/pkgconfig,data/pkgconfig," > \ > -e 's,VERSION STR(LESS|EQUAL|GREATER) "([^"]+)",VERSION > VERSION_\1 \2,g' \ > ${WRKSRC}/CMakeLists.txt > ${REINPLACE_CMD} -e "s,soprano/cmake,cmake/Modules," \ > ${WRKSRC}/cmake/modules/CMakeLists.txt > > post-install: > .if defined(WITH_VIRTUOSO) > @${CAT} ${PKGMESSAGE} > .endif > > .include <bsd.port.post.mk> > > Further the result of the latest build attempt is available at ftp.vizion2000.net/pub/kde4-build3 Again we have a failure of kdegraphics4 "Could NOT find Nepomuk (missing: NEPOMUK_LIBRARIES NEPOMUK_INCLUDE_DIR SPORANO_PLUGIN_REDLANDBACKEND_FOUND) as per previous report. The build was of /usr/ports/x11/kde4 Command was: make -DDISABLE_MAKE_JOBS -DCMAKE_VERBOSE David
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3290E0C31EEA4A018EBE945B0765D2DE>