Date: Thu, 12 Dec 2002 14:19:04 -0500 (EST) From: Andrew Gallatin <gallatin@cs.duke.edu> To: Jonathan Disher <jdisher@parad.net> Cc: Long Le <le@cs.unc.edu>, freebsd-hardware@FreeBSD.ORG, <net@FreeBSD.ORG> Subject: Re: Broadcom NetXtreme 5703 NIC Message-ID: <15864.57640.801997.698563@grasshopper.cs.duke.edu> In-Reply-To: <Pine.LNX.4.44.0212111505180.9633-200000@pasiphae> References: <Pine.LNX.4.33.0212111332570.886-200000@le-cs.cs.unc.edu> <Pine.LNX.4.44.0212111505180.9633-200000@pasiphae>
next in thread | previous in thread | raw e-mail | index | archive | help
Jonathan Disher writes: > On Wed, 11 Dec 2002, Long Le wrote: > > > Hi all, > > > > We installed FreeBSD 4.7 on an IBM eServer machine with an on-board > > copper Broadcom BCM5703X and put two more fiber Broadcom BCM5703X NICs > > into the machine. We used cvs to get the latest update on the stable > > branch yesterday. However, only the copper NIC and one fiber NIC > > come up. The log message says "bge2: MII without any PHY!" for the > > second fiber NIC. Does anyone have any suggestion for us? > > I'm in somewhat the same boat. We just purchased and installed two ASUS > A7V8X motherboards with onboard Broadcom BCM5702 Gigabit ethernet > controllers, and we're having some problems getting them to work. I > cvsup'd to the latest -STABLE last night, and the controller is found, but > it's using ukphy instead of brgphy. Has anyone gotten this controller to New phy support which is required for the BCM5703 was merged from current yesterday. You may which to try a more recent stable and verify that you have rev 1.4.2.10 of sys/dev/mii/miidevs.h Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15864.57640.801997.698563>