Date: Wed, 8 Jul 2009 00:59:38 -0300 From: Gonzalo Nemmi <gnemmi@gmail.com> To: "Paul B. Mahol" <onemda@gmail.com> Cc: freebsd-current@freebsd.org Subject: Re: Can't get resume to work on -BETA1/-CURRENT-200906, help needed Message-ID: <19e9a5dc0907072059p600fbe75ha44bc5d5f1cac7d8@mail.gmail.com> In-Reply-To: <3a142e750907072039w3c5d6557ia374920a3787cf1c@mail.gmail.com> References: <19e9a5dc0907062310s6de64529uc1fb544d0b357829@mail.gmail.com> <3a142e750907070123r1e18a610h701e834bcd13f840@mail.gmail.com> <200907072150.36428.gnemmi@gmail.com> <3a142e750907072039w3c5d6557ia374920a3787cf1c@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 8, 2009 at 12:39 AM, Paul B. Mahol <onemda@gmail.com> wrote: > On 7/8/09, Gonzalo Nemmi <gnemmi@gmail.com> wrote: > > On Tuesday 07 July 2009 5:23:57 am Paul B. Mahol wrote: > >> On 7/7/09, Gonzalo Nemmi <gnemmi@gmail.com> wrote: > >> > log in > >> > acpiconf -s 3 > >> > suspend works > >> > opened the lid and the screen doesn't come back (backlight never > >> > gets back) hard reset > >> > login again and checked /var/log/messages .. this is what I found: > >> > > >> > Jul 7 00:32:01 gargoyle login: ROOT LOGIN (root) ON ttyv0 > >> > Jul 7 00:32:09 gargoyle acpi: suspend at 20090707 00:32:09 > >> > Jul 7 00:32:15 gargoyle kernel: fwohci0: fwohci_pci_suspend > >> > Jul 7 00:33:18 gargoyle kernel: ugen3.2: <vendor 0x1bcf> at usbus3 > >> > (disconnected) > >> > Jul 7 00:33:18 gargoyle kernel: ums0: at uhub6, port 1, addr 2 > >> > (disconnected) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY write timed out (phy 1, > >> > reg 0, val 32768) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY read timed out (phy 1, > >> > reg 0, val 0xffffffff) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY read timed out (phy 1, > >> > reg 24, val 0xffffffff) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY read timed out (phy 1, > >> > reg 16, val 0xffffffff) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY write timed out (phy 1, > >> > reg 16, val 0) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY read timed out (phy 1, > >> > reg 16, val 0xffffffff) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY write timed out (phy 1, > >> > reg 16, val 0) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: PHY write timed out (phy 1, > >> > reg 23, val 18) > >> > Jul 7 00:33:18 gargoyle kernel: bge0: flow-through queue init > >> > failed Jul 7 00:33:18 gargoyle kernel: bge0: initialization > >> > failure Jul 7 00:33:18 gargoyle kernel: fwohci0: Phy 1394a > >> > available S400, 1 ports. Jul 7 00:33:18 gargoyle kernel: fwohci0: > >> > Link S400, max_rec 2048 bytes. Jul 7 00:33:18 gargoyle kernel: > >> > fwohci0: Initiate bus reset Jul 7 00:33:18 gargoyle kernel: > >> > fwohci0: fwohci_intr_core: BUS reset Jul 7 00:33:18 gargoyle > >> > kernel: fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID > >> > Count=1, CYCLEMASTER mode > >> > Jul 7 00:33:18 gargoyle kernel: firewire0: 1 nodes, maxhop <= 0 > >> > cable IRM irm(0) (me) > >> > Jul 7 00:33:18 gargoyle kernel: firewire0: bus manager 0 > >> > Jul 7 00:33:18 gargoyle kernel: fwohci0: unrecoverable error > >> > Jul 7 00:33:18 gargoyle kernel: wakeup from sleeping state (slept > >> > 00:01:03) Jul 7 00:33:18 gargoyle kernel: ugen3.2: <vendor 0x1bcf> > >> > at usbus3 Jul 7 00:33:18 gargoyle kernel: ums0: <vendor 0x1bcf USB > >> > Optical Mouse, class 0/0, rev 2.00/0.10, addr 2> on usbus3 > >> > Jul 7 00:33:18 gargoyle kernel: ums0: 3 buttons and [XYZ] > >> > coordinates ID=1 Jul 7 00:33:18 gargoyle acpi: resumed at 20090707 > >> > 00:33:18 Jul 7 00:33:40 gargoyle syslogd: exiting on signal 15 > >> > > >> > any hints on how to further debug or redirect this mail to the > >> > right list will be greatly appreciated. > >> > > >> > more info can be found in here: > >> > http://forums.freebsd.org/showthread.php?t=3886 > >> > > >> > Best Regards > >> > Gonzalo Nemmi > >> > >> i386 resume doesn't work with SMP kernel and SMP CPU. > >> On amd64 make sure that you have right file loaded in kernel: > >> for example i915.ko for intel cards. > > > > I shoul've mentioned I'm on a: > > CPU: Intel(R) Celeron(R) CPU 560 @ 2.13GHz (2128.02-MHz > > 686-class CPU) > > > > and that I've added: hint.smp.disabled=1 to my /boot/device.hints > > > > This is what I get: > > > > Jul 7 21:35:03 gargoyle login: ROOT LOGIN (root) ON ttyv0 > > Jul 7 21:40:19 gargoyle acpi: suspend at 20090707 21:40:19 > > Jul 7 21:40:25 gargoyle kernel: fwohci0: fwohci_pci_suspend > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY write timed out (phy 1, reg > > 0, val 32768) > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY read timed out (phy 1, reg 0, > > val 0xffffffff) > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY read timed out (phy 1, reg > > 24, val 0xffffffff) > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY read timed out (phy 1, reg > > 16, val 0xffffffff) > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY write timed out (phy 1, reg > > 16, val 0) > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY read timed out (phy 1, reg > > 16, val 0xffffffff) > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY write timed out (phy 1, reg > > 16, val 0) > > Jul 7 21:41:44 gargoyle kernel: bge0: PHY write timed out (phy 1, reg > > 23, val 18) > > Jul 7 21:41:44 gargoyle kernel: bge0: flow-through queue init failed > > Jul 7 21:41:44 gargoyle kernel: bge0: initialization failure > > Jul 7 21:41:44 gargoyle kernel: fwohci0: Phy 1394a available S400, 1 > > ports. > > Jul 7 21:41:44 gargoyle kernel: fwohci0: Link S400, max_rec 2048 bytes. > > Jul 7 21:41:44 gargoyle kernel: fwohci0: Initiate bus reset > > Jul 7 21:41:44 gargoyle kernel: fwohci0: fwohci_intr_core: BUS reset > > Jul 7 21:41:44 gargoyle kernel: fwohci0: fwohci_intr_core: > > node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode > > Jul 7 21:41:44 gargoyle kernel: firewire0: 1 nodes, maxhop <= 0 cable > > IRM irm(0) (me) > > Jul 7 21:41:44 gargoyle kernel: firewire0: bus manager 0 > > Jul 7 21:41:44 gargoyle kernel: fwohci0: unrecoverable error > > Jul 7 21:41:44 gargoyle kernel: wakeup from sleeping state (slept > > 00:01:19) > > Jul 7 21:41:44 gargoyle acpi: resumed at 20090707 21:41:44 > > Jul 7 21:42:45 gargoyle syslogd: exiting on signal 15 > > > > Should I file a PR? > > > > Once again, boot -v in here: http://pastebin.com/f604c1399 > > > > More info on my hardware and other messages: > > http://forums.freebsd.org/showthread.php?t=3886 > > > > Best Regards > > Gonzalo > > -- > > Blessings > > Gonzalo Nemmi > > > > Sorry, but I dont see what graphic card you are using. > Anyway, on i386 you must load vesa.ko if ypu want that resume also resumes > video > > -- > Paul 322 vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xf6e00000-0xf6efffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 323 agp0: <Intel GM965 SVGA controller> on vgapci0 324 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xe0000000 325 vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf6e00000 326 agp0: detected 7676k stolen memory 327 agp0: aperture size is 256M 328 vgapci1: <VGA-compatible display> mem 0xf6f00000-0xf6ffffff at device 2.1 on pci0 im not running X or anything .. so I guess im using whatever module 8 uses by default (actually I thought it was the vesa module), this is just a plain 8.0-BETA1 install (not even a single port installed). will try loading vesa, see what happens and report back. Thanks for your interest and help Best Regards Gonzalo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19e9a5dc0907072059p600fbe75ha44bc5d5f1cac7d8>