Date: Wed, 6 Dec 2006 15:50:34 GMT From: Dirk König<CCdrom@Web.de> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/106421: FreeBSD 6.1 Installation - Fatal Trap 12 Message-ID: <200612061550.kB6FoYxv043175@www.freebsd.org> Resent-Message-ID: <200612061600.kB6G0OJK020357@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 106421
>Category: i386
>Synopsis: FreeBSD 6.1 Installation - Fatal Trap 12
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Dec 06 16:00:24 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Dirk König
>Release: 6.1, 5.4
>Organization:
no
>Environment:
FreeBSD 6.1 RELEASE Installation Kernel (can't run uname -a)
>Description:
Hallo,
ich versuche FreeBSD (6.1-RELEASE-i386-disc1.iso) mit dem GENERIC kernel auf meinen Laptop zu installieren (Details zum Gerät am Ende). Aber jedesmal wenn ich die Installation starte erhalte ich folgende Fehlermeldung:
---------------
kbd1 at kbdmux0
cpu0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard
$PIR: BIOS IRQ 11 for 0.14.INTA is not valid for link 0x60
pci0: <PCI bus> on pcib0
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xeb761
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc00eb647
stack pointer = 0x28:0xc10209e0
frame pointer = 0x28:0xc10209e0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def 32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
Uptime: 1s
Automatic reboot in 15 Seconds - press a key on the console to abort
---------------
Ich habe schon sehr lange nach dem Problem im Internet gesucht, in Foren geschrieben, in Mailing Listen angemeldet, aber bisher konnte mir noch niemand helfen. Das habe ich bisher alles getan:
---------------
- Alle externen Geräte abgezogen
- Boot with ACPI enabled, Boot in Single user modus, Boot in save Mode
- Boot von floppy-images
- FreeBSD 5.4, 6.2 beta ausgetestet - gleiches Resultat
- Update system bios
- Disable IDE drives, PS/2, floppy, com ports, lpt port, disable dma (Don't have a chance to configure the IRQ's ACPI in the bios)
- Set "Enable power saving" in bios results in a hanging freebsd (calibrating clocks)
- Disable "Enable PnP OS Support" in Bios
- Set the following sysctl- variables at the bootloader:
set hw.pcic.intr_path=1 (tip from Ted Mittelstaedt, its the same machine as my) http://72.14.221.104/search?q=cache:rxUdywqIYDcJ:ftp4.de.freebsd.org/pub/FreeBSD/gnats/gnats/i386/33574+0xc00eb637&hl=de&gl=de&ct=clnk&cd=1)
set hw.pcic.irq=0
set hw.pci.allow_unsupported_io_range=1
set hw.pci_disable_bios_route=1 (http://leaf.dragonflybsd.org/mailarchive/kernel/2004-03/msg00328.html)
---------------
Es half leider keines der beschriebenen Maßnahmen. Windows 2000 Professional, OpenBSD 4.0, NetBSD 3.1 und Knoppix 3.9 laufen problemlos. Memtest86 und Windows memory Diagnostic melden keine Fehler, auch ansonsten läuft der Rechner sehr stabil. Unter Dragonfly BSD 1.6 erhalte ich übrigens folgenden Output:
---------------
cbb1: <TI1225 PCI-Cardbus Bridge> at device 10.1 on pci0
cardbus1.cbb1.pci0.pcib0.legacypci0.nexus.0.root0
cardbus1: <CardBus bus> [tentatitive] on cbb1
cardbus1: <CardBus bus> [attached!] on cbb1
pccard1.cbb1.pci0.pcib0.legacypci0.nexus0.root0
pccard1: <16-bit PCCard bus> [tentative] on cbb1
pccard1: <16-bit PCCard bus> [attached!] on cbb1
pci_cfgintr_unique: hard-routed to irq 10
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xeb761
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc00eb647
stack pointer = 0x10:0xc0758a00
frame pointer = 0x10:0xc0758a00
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def 32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
current threat = pri 12
kernel: type 12 trap, code=0
Stopped at 0xc00eb647: cmpb %cs:0x1(%esi),%bl
---------------
Hier die Details zu dem Laptop:
---------------
- Gericom Overdose Polo-5100C (sold as "Network", a branding of Media-Markt, store in europe)
- 433Mhz Intel Celeron
- Intel 440 BX Chip
- SystemSoft Bios from 18. May 1999 (latest)
- 128MB Total Memory
- 20GB HDD with Windows 2000 and currently OpenBSD installed on it.
- S3 Graphics VIRGE-MX
- ESS 1969 Sound
- Floppy, Cdrom, USB-Port, PCMCIA, COM, lpt, PS/2
---------------
Ich hoffe Sie können mir bei diesem Problem helfen, da ich FreeBSD sehr verbunden bin und nicht OpenBSD laufen lassen möchte.
Dirk Koenig
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612061550.kB6FoYxv043175>