From owner-freebsd-mobile Tue Mar 14 12:10:41 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from zibbi.mikom.csir.co.za (zibbi.mikom.csir.co.za [146.64.24.58]) by hub.freebsd.org (Postfix) with ESMTP id 1A98F37B681 for ; Tue, 14 Mar 2000 12:10:11 -0800 (PST) (envelope-from jhay@zibbi.mikom.csir.co.za) Received: (from jhay@localhost) by zibbi.mikom.csir.co.za (8.9.3/8.9.3) id WAA51181; Tue, 14 Mar 2000 22:09:53 +0200 (SAT) (envelope-from jhay) From: John Hay Message-Id: <200003142009.WAA51181@zibbi.mikom.csir.co.za> Subject: Re: No PC-CARD Slots; Device Not Configured In-Reply-To: <38CD8708.1526342@woodson.com> from Lance Woodson at "Mar 13, 2000 06:25:44 pm" To: lance@woodson.com (Lance Woodson) Date: Tue, 14 Mar 2000 22:09:53 +0200 (SAT) Cc: freebsd-mobile@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > I've installed today's 4.0-20000313-CURRENT snapshot but can't get my > PCMCIA controller working. > > My kernel has: > device card > device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000 > device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 > > dmesg shows: > pcic-pci0: irq 11 at device 3.0 on pci0 > pcic-pci1: irq 11 at device 3.1 on pci0 > > but pccardd gives: fatal error: no PC-CARD slots > and pccardc gives: /dev/card0: Device not configured > I have seen this also when trying to install a 802.11 WaveLAN pcmcia card in a normal PC with a PCI-PCMCIA bridge. In my case the bridge is a TI PCI-1225. From looking at sys/pci/pcic_p.c I'm starting to think the probe messages is just printed, but there is nothing hooking the card into the rest of the pccard/pcmcia stuff... but I might be wrong. :-) Here is the dmesg of a boot -v session in case someone have a clue about how these things should work. John -- John Hay -- John.Hay@mikom.csir.co.za Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-20000311-SNAP #0: Mon Mar 13 18:33:30 SAST 2000 root@tj1.cids.org.za:/usr/src/sys/compile/TJ Calibrating clock(s) ... TSC clock: 501201757 Hz, i8254 clock: 1193339 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff real memory = 134152192 (131008K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x002b3000 - 0x07fe7fff, 131289088 bytes (32053 pages) fb: new array size 4 avail memory = 127397888 (124412K bytes) bios32: Found BIOS32 Service Directory header at 0xc00facd0 bios32: Entry = 0xfb150 (c00fb150) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb330 pnpbios: Found PnP BIOS data at 0xc00fbed0 pnpbios: Entry = f0000:bef8 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6ab0 Preloaded elf kernel "kernel" at 0xc029a000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000e000, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00005000, size 4 found-> vendor=0x5333, dev=0x8901, revid=0x06 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 1, range 32, base e4000000, size 26 found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base ea110000, size 12 map[14]: type 1, range 32, base 0000e400, size 6 map[18]: type 1, range 32, base ea000000, size 20 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=e8 intpin=a, irq=9 map[10]: type 1, range 32, base ea108000, size 12 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=ec intpin=a, irq=9 map[10]: type 1, range 32, base ea10c000, size 12 found-> vendor=0x1073, dev=0x000c, revid=0x03 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base ea100000, size 15 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 status0=28 status1=28 ata1: mask=03 status0=18 status1=18 ata1: devices = 0x0 ata1: probe allocation failed pci0: (vendor=0x8086, dev=0x7112) at 7.2 irq 11 chip1: port 0x5000-0x500f at device 7.3 on pci0 pci0: (vendor=0x5333, dev=0x8901) at 8.0 irq 12 fxp0: port 0xe400-0xe43f mem 0xea000000-0xea0fffff,0xea110000-0xea110fff irq 5 at device 9.0 on pci0 fxp0: Ethernet address 00:90:27:8b:3b:7d fxp0: supplying EUI64: 00:90:27:ff:fe:8b:3b:7d bpf: fxp0 attached pcic-pci0: mem 0xea108000-0xea108fff irq 9 at device 10.0 on pci0 PCI Config space: 00: ac1c104c 02100007 06070001 00824008 10: ea108000 020000a0 0000e801 ea109000 20: ea10a000 ea10b000 00000000 00000000 30: 00000000 00000000 00000000 03400109 40: 2023133f 00000001 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 28449060 00000000 00000000 0cc07d92 90: 606000c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000006: 00000000: 30000410: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 pcic-pci1: mem 0xea10c000-0xea10cfff irq 9 at device 10.1 on pci0 PCI Config space: 00: ac1c104c 02100007 06070001 00824008 10: ea10c000 020000a0 0000ec01 ea10d000 20: ea10e000 ea10f000 00000000 00000000 30: 00000000 00000000 00000000 03400109 40: 2023133f 00000001 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 28449060 00000000 00000000 0cc07d92 90: 606000c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000006: 00000000: 30001810: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 pci0: (vendor=0x1073, dev=0x000c) at 11.0 irq 11 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 bpf: lp0 attached isa_probe_children: probing PnP devices BIOS Geometries: 0:0315fe3f 0..789=790 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: ppp0 attached new masks: bio 40084040, tty 4003009a, net 400700ba bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: ATA-4 disk at ata0 as master ad0: 6204MB (12706470 sectors), 13446 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 12691349, size 12691287 : OK start_init: trying /sbin/init To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message