Date: Wed, 22 Jan 1997 15:49:18 -0500 (EST) From: stoney@florence.ds.adp.com (Don Stonebraker) To: freebsd-questions@FreeBSD.ORG Subject: Installation of SCSI Tape device Message-ID: <9701222049.AA11277@corky>
next in thread | raw e-mail | index | archive | help
We are trying (without success) to install the following equipment in
our FreeBSD machine:
- adaptec AHA-2940 Ultra wide PCI-to-UltraSCSI Adapter
- HP SureStore model 5000i tape (channel 3 on SCSI device)
- NEC CD ROM (channel 6 on the SCSI device)
Per the 'man' page /usr/share/man/ahc.4, I added the following lines
to out kernal:
controller ahc0
controller scbus0
device st0
device cd0
and executed:
# make depend
# make
# make install
During the compilation I can see it including the SCSI device driver
code but when the machine is booted there is no mention of it being
installed and we cannot access the devices.
The following devices were set up in the /dev directory with the
MAKEDEV command:
# ls *st*
erst0 nrst0 rst0 rst0.ctl stderr
erst0.0 nrst0.0 rst0.0 st0ctl.0 stdin
erst0.1 nrst0.1 rst0.1 st0ctl.1 stdout
erst0.2 nrst0.2 rst0.2 st0ctl.2
erst0.3 nrst0.3 rst0.3 st0ctl.3
# ls cd*
cd0a cd0c
What am I doing wrong or leaving out? How can I gain access to the SCSI
devices? I would appreciate any help you can give.
. . . . . . . . Here is a copy of our console log during the boot . . . . . .
# dmesg
FreeBSD 2.1.0-RELEASE #0: Wed Jan 22 14:09:04 1997
root@freek:/usr/src/sys/compile/CUSTOM
CPU: 75-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 33554432 (32768K bytes)
avail memory = 30818304 (30096K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 on isa
ed0: address 00:80:ad:17:03:96, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC31200F>
wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
npx0 on motherboard
npx0: INT 16 interface
--
=========================================================================
Don Stonebraker
ADP Dealer Services
(606) 371-5005
ADP On Net 441-1456
stoney@florence.ds.adp.com
=========================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9701222049.AA11277>