From owner-freebsd-smp Sat Aug 23 12:16:30 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id MAA09996 for smp-outgoing; Sat, 23 Aug 1997 12:16:30 -0700 (PDT) Received: from lion.activ-consult.de (lion.activ-consult.de [194.221.76.66]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id MAA09991 for ; Sat, 23 Aug 1997 12:16:25 -0700 (PDT) Received: (from dirk@localhost) by lion.activ-consult.de (8.8.7/8.8.7) id VAA25935; Sat, 23 Aug 1997 21:15:52 +0200 (MET DST) Message-ID: <19970823211552.26652@activ-consult.de> Date: Sat, 23 Aug 1997 21:15:52 +0200 From: Dirk Froemberg To: smp@freebsd.org Subject: SMP on a ASUS P65UP5?! Mime-Version: 1.0 Content-Type: multipart/mixed; boundary=17pEHd4RhPHOinZp X-Mailer: Mutt 0.75 Sender: owner-freebsd-smp@freebsd.org X-Loop: FreeBSD.org Precedence: bulk --17pEHd4RhPHOinZp Content-Type: text/plain; charset=us-ascii Hello! Has anybody run FreeBSD-SMP successfully on a ASUS P65UP5 with C-P6ND (Dual Pentium Pro Card)? After booting from a SMP-GENERIC-kernel from 3.0-970815-SNAP the machine hangs for a few minutes after APIC_IO: routing 8254 via 8259 on pin 0 . Then Timedout SCB handled by another timeout is printed on the console twice. After another few minutes timeouts concerning ahc0 and sd0 are printed. The output from mptable -verbose -dmesg is attached below. Any ideas? Best regards Dirk -- -------------------------------------------------------------- Dirk Froemberg ACTIV-CONSULT GmbH Online Service Center Nordhauser Str. 30 10589 Berlin mailto:dirk.froemberg@activ-consult.de FON +49-30-34602-272 http://www.activ-consult.de/ FAX +49-30-34602-222 -------------------------------------------------------------- --17pEHd4RhPHOinZp Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="mptable.out" =============================================================================== MPTable, version 2.0.13 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00 searching CMOS 'top of mem' @ 0x0009f800 (638K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 MP FPS found in BIOS @ physical addr: 0x000f60b0 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f60b0 signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x8e mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f5caa signature: 'PCMP' base table length: 244 version: 1.1 checksum: 0x42 OEM ID: 'OEM00000' Product ID: 'PROD00000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 22 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 1 0x11 BSP, usable 6 1 9 0xfbff 0 0x11 AP, usable 6 1 9 0xfbff -- Bus: Bus ID Type 0 PCI 1 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT conforms conforms 1 0 2 0 INT conforms conforms 1 1 2 1 INT conforms conforms 1 0 2 2 INT conforms conforms 1 3 2 3 INT conforms conforms 1 4 2 4 INT conforms conforms 1 5 2 5 INT conforms conforms 1 6 2 6 INT conforms conforms 1 7 2 7 INT conforms conforms 1 8 2 8 INT conforms conforms 1 10 2 10 INT conforms conforms 1 12 2 12 INT conforms conforms 1 14 2 14 INT conforms conforms 1 15 2 15 INT active-lo level 1 11 2 17 INT active-lo level 1 9 2 19 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT active-hi edge 1 0 255 0 NMI active-hi edge 1 0 255 1 ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Useful: #options SMP_AUTOSTART # start the additional CPUs during boot # Optional (built-in defaults will work in most cases): #options NCPU=2 # number of CPUs #options NBUS=2 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs ------------------------------------------------------------------------------- dmesg output: Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-970815-SNAP #0: Fri Aug 15 09:33:39 GMT 1997 root@make.ican.net:/usr/src/sys/compile/GENERIC CPU: Pentium Pro (199.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping=9 Features=0xfbff real memory = 68091904 (66496K bytes) avail memory = 63680512 (62188K bytes) Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 ide_pci0: rev 0x00 on pci0.1.1 ahc0: rev 0x00 int a irq 11 on pci0.11.0 ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 sd0 at scbus0 target 0 lun 0 sd0: type 0 fixed SCSI 2 sd0: Direct-Access 699MB (1431760 512 byte sectors) vga0: rev 0x01 int a irq 9 on pci0.13.0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0: disabled, not probed. fe0: disabled, not probed. sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1: disabled, not probed. mse0: disabled, not probed. psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0: disabled, not probed. wdc1: disabled, not probed. bt0: disabled, not probed. uha0: disabled, not probed. aha0: disabled, not probed. aic0: disabled, not probed. nca0: disabled, not probed. nca1: disabled, not probed. sea0: disabled, not probed. wt0: disabled, not probed. mcd0: disabled, not probed. matcdc0: disabled, not probed. scd0: disabled, not probed. ie0: disabled, not probed. 1 3C5x9 board(s) on ISA found at 0x300 ep0 at 0x300-0x30f irq 10 on isa ep0: aui/utp/bnc[*BNC*] address 00:60:97:3d:e5:c2 ex0: disabled, not probed. le0: disabled, not probed. lnc0: disabled, not probed. ze0: disabled, not probed. zp0: disabled, not probed. npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. changing root device to sd0a =============================================================================== --17pEHd4RhPHOinZp--