From owner-freebsd-questions Wed Jul 2 07:58:06 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id HAA08669 for questions-outgoing; Wed, 2 Jul 1997 07:58:06 -0700 (PDT) Received: from alphanetcorp.com (mail.alphanetcorp.com [206.99.34.1]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id HAA08659 for ; Wed, 2 Jul 1997 07:58:02 -0700 (PDT) Received: by webalphanet.alphanetcorp.com id <31361>; Wed, 2 Jul 1997 10:56:52 -0400 Message-Id: <97Jul2.105652edt.31361@webalphanet.alphanetcorp.com> Date: Wed, 2 Jul 1997 11:00:35 -0400 From: Gerald Ranada Organization: AlphaNet Solutions, Inc. X-Mailer: Mozilla 4.01 [en] (Win95; I) MIME-Version: 1.0 To: andreas@gtn.com, questions@FreeBSD.ORG Subject: Boot problems X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Ok, going from the beginning.... I have an NEC 8x SCSI II CDROM with a Seagate Barracuda 32171W 2Gig HD. My motherboard is a Supermicro STE with the Triton II chipset and I have 64 Megs 60ns megs of Parity RAM. I set the motherboard BIOS settings to "failsafe" mode. I inserted the 2.2.2-RELEASE BSD CDROM into the CDROM and my Adaptec 2940UW controller recognizes it to be a bootable CD. The SCSI ID of the barracuda is 0 and the CDROM is 4. The Adaptec BIOS settings are at the defaults. The system boots off of the CDROM and then prompts me for kernel settings. I also have an SMC 8013 ethernet card. At the kernel settings screen, I only specified the hardware installed on my computer. Also, I verified the IRQ and DMA settings and I am sure that there are no conflicts. When it comes up to the installation screen after successfully detecting the CDROM and the hardware, I went to the custom section. At the partition subsection, I selected to reserve the entire HD with no OS compatibility for BSD. The installation type selected is kernel src only with base programs. The installation goes through fine without any errors. I reboot and take the CDROM out of the drive. The "boot: " prompt comes up and I let it time out to the default kernel. Then the "text: 0x2938" whatever comes up with a spinning cursor and after after 2 seconds the HD light stays on the computer crashes with the spinning cursor stopped. In about 1 out of 15 tries, I might get a successfull boot so it seems that at least the installation went through ok. I think it may have to do with the HD geometry but I could be wrong.