Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 22 Apr 2019 02:37:46 +0000 (UTC)
From:      Ian Lepore <ian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-11@freebsd.org
Subject:   svn commit: r346512 - in stable/11/share/man: man4 man9
Message-ID:  <201904220237.x3M2bkPZ056840@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: ian
Date: Mon Apr 22 02:37:46 2019
New Revision: 346512
URL: https://svnweb.freebsd.org/changeset/base/346512

Log:
  MFC r330358, r330360
  
  r330358: Minor changes to wording.
  r330360: Minor (mostly) wording changes.

Modified:
  stable/11/share/man/man4/fdt_pinctrl.4
  stable/11/share/man/man9/fdt_pinctrl.9
Directory Properties:
  stable/11/   (props changed)

Modified: stable/11/share/man/man4/fdt_pinctrl.4
==============================================================================
--- stable/11/share/man/man4/fdt_pinctrl.4	Mon Apr 22 01:08:14 2019	(r346511)
+++ stable/11/share/man/man4/fdt_pinctrl.4	Mon Apr 22 02:37:46 2019	(r346512)
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd March 2, 2018
+.Dd March 3, 2018
 .Dt "FDT_PINCTRL" 4
 .Os
 .Sh NAME
@@ -36,13 +36,13 @@
 .Pp
 Pin multiplexing is a technology used to re-purpose a single
 physical connection (depending on chip packaging it may be
-pin, ball, or pad) to pull signal from one of SoC internal
-controllers to peripheral devices.
+pin, ball, or pad) by routing its signal to any one of several 
+different SoC internal devices.
 For example, based on the actual device design, a single SoC chip
-pin can perform any of these roles: SPI clock, I2C
+pin might perform any of these roles: SPI clock, I2C
 data, GPIO pin, or PWM signal.
 Function selection is performed by the pinmux controller, a SoC
-hardware block, usually controlled a set of registers.
+hardware block which is usually controlled by a set of registers.
 Pinmux controller capabilities and register format depend
 on the actual hardware implementation.
 .Pp
@@ -104,11 +104,11 @@ backlight@7f000000 {
 }
 .Ed
 .Pp
-The pinctrl driver should implement FDT_PINCTRL_CONFIGURE
-method, register itself as pin configuration handler by
+The pinctrl driver should implement the FDT_PINCTRL_CONFIGURE
+method, register itself as a pin configuration handler by
 calling fdt_pinctrl_register function, and call
 .Xr fdt_pinctrl_configure_tree 9
-to configure pins for all enabled devices (device where
+to configure pins for all enabled devices (devices where
 the "status" property is not set to "disabled").
 .Sh SEE ALSO
 .Xr fdt_pinctrl 9

Modified: stable/11/share/man/man9/fdt_pinctrl.9
==============================================================================
--- stable/11/share/man/man9/fdt_pinctrl.9	Mon Apr 22 01:08:14 2019	(r346511)
+++ stable/11/share/man/man9/fdt_pinctrl.9	Mon Apr 22 02:37:46 2019	(r346512)
@@ -28,7 +28,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd March 2, 2018
+.Dd March 3, 2018
 .Dt fdt_pinctrl 9
 .Os
 .Sh NAME
@@ -50,15 +50,17 @@ provides an API for manipulating I/O pin configuration
 pinmux controllers and pinmux clients.
 On the controller side, the standard newbus probe and
 attach methods are implemented.
-This driver also implements the
-.Fn fdt_pinctrl_configure
-method, in which it calls the
+As part of handling attach, it calls the
 .Fn fdt_pinctrl_register
 function to register itself as a pinmux controller.
 Then
 .Fn fdt_pinctrl_configure_tree
 is used to walk the device tree and configure pins specified by the pinctrl-0
 property for all active devices.
+The driver also implements the
+.Fn fdt_pinctrl_configure
+method, which allows client devices to change their
+pin configurations after startup.
 If a client device requires a pin configuration change at some
 point of its lifecycle, it uses the
 .Fn fdt_pinctrl_configure
@@ -84,14 +86,9 @@ registers a pinctrl driver so that it can be used by o
 .Fn fdt_pinctrl_configure
 or
 .Fn fdt_pinctrl_configure_by_name .
-The
-.Fa pinprop
-argument is the name of a property that
-identifies each descendant of the pinctrl
-node.
-The pinctrl node is a pin configuration
-node whose xref phandle can be passed to
-.Fn FDT_PINCTRL_CONFIGURE .
+It also registers each child node of the pinctrl driver's node which contains
+a property with the name given in
+.Fa pinprop .
 If
 .Fa pinprop
 is



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201904220237.x3M2bkPZ056840>