Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 01 Nov 2004 21:43:09 +0300
From:      Alexey G Misyurenko <mag@caravan.ru>
To:        freebsd-current@freebsd.org
Subject:   STE (DLink DFE580-TX) problems
Message-ID:  <418683BD.5040707@caravan.ru>

next in thread | raw e-mail | index | archive | help
Hello!

I try to use FreeBSD 5.3-RC1 or 4.10 at my PC there is installed DLink DFE580-TX Quad FastEthernet NIC.
I try different kernel configuration with/without acpi, SMP nut result is same - I can see only first of
FE interface on DLink card.

p.s. I can grant access to this one host or make any paches of kernel which can help.


Below pciconf and dmesg output.

tt# pciconf -l -v
agp0@pci0:0:0:  class=0x060000 card=0x40041695 chip=0x25708086 rev=0x02 hdr=0x00
     vendor   = 'Intel Corporation'
     device   = '82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface'
     class    = bridge
     subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x25718086 rev=0x02 hdr=0x01
     vendor   = 'Intel Corporation'
     device   = '82865G/PE/P, 82848P PCI-to-AGP Bridge'
     class    = bridge
     subclass = PCI-PCI
pcib2@pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01
     vendor   = 'Intel Corporation'
     device   = '82801BA/CA/DB/DBL/EB/ER (ICH2/3/4/4-L/5/5R), 6300ESB Hub Interface to PCI Bridge'
     class    = bridge
     subclass = PCI-PCI
isab0@pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00
     vendor   = 'Intel Corporation'
     device   = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
     class    = bridge
     subclass = PCI-ISA
atapci0@pci0:31:2:      class=0x01018a card=0x40041695 chip=0x24d18086 rev=0x02 hdr=0x00
     vendor   = 'Intel Corporation'
     device   = '82801EB (ICH5) SATA Controller'
     class    = mass storage
     subclass = ATA
none0@pci0:31:3:        class=0x0c0500 card=0x40041695 chip=0x24d38086 rev=0x02 hdr=0x00
     vendor   = 'Intel Corporation'
     device   = '82801EB/ER (ICH5/ICH5R) SMBus Controller'
     class    = serial bus
     subclass = SMBus
none1@pci1:0:0: class=0x030000 card=0x00000000 chip=0x018110de rev=0xc1 hdr=0x00
     vendor   = 'NVIDIA Corporation'
     device   = 'GeForce4 MX 440 with AGP 8X [NV18.2]'
     class    = display
     subclass = VGA
pcib3@pci2:3:0: class=0x060400 card=0x000000dc chip=0xb1528086 rev=0x00 hdr=0x01
     vendor   = 'Intel Corporation'
     device   = 'S21152BB PCI to PCI Bridge'
     class    = bridge
     subclass = PCI-PCI
rl0@pci2:5:0:   class=0x020000 card=0x90011695 chip=0x813910ec rev=0x10 hdr=0x00
     vendor   = 'Realtek Semiconductor'
     device   = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
     class    = network
     subclass = ethernet
ste0@pci3:4:0:  class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
     vendor   = 'D-Link System Inc'
     device   = 'DFE-550TX/580TX Fast Ethernet Adapter'
     class    = network
     subclass = ethernet
ste1@pci3:5:0:  class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
     vendor   = 'D-Link System Inc'
     device   = 'DFE-550TX/580TX Fast Ethernet Adapter'
     class    = network
     subclass = ethernet
ste2@pci3:6:0:  class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
     vendor   = 'D-Link System Inc'
     device   = 'DFE-550TX/580TX Fast Ethernet Adapter'
     class    = network
     subclass = ethernet
ste3@pci3:7:0:  class=0x020000 card=0x10121186 chip=0x10021186 rev=0x14 hdr=0x00
     vendor   = 'D-Link System Inc'
     device   = 'DFE-550TX/580TX Fast Ethernet Adapter'
     class    = network
     subclass = ethernet

and heare dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RC1 #0: Sun Oct 17 01:25:37 UTC 2004
     root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2399.74-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 268369920 (255 MB)
avail memory = 252973056 (241 MB)
MPTable: <OEM00000 PROD00000000>
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf0000000-0xf3ffffff at device 0.0 o
n pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <MPTable PCI-PCI bridge> at device 3.0 on pci2
pci3: <PCI bus> on pcib3
ste0: <D-Link DL10050 10/100BaseTX> port 0xc000-0xc07f irq 20 at device 4.0 on p
ci3
miibus0: <MII bus> on ste0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ste0: Ethernet address: 00:05:5d:7d:16:60
ste0: if_start running deferred for Giant
ste0: [GIANT-LOCKED]
ste1: <D-Link DL10050 10/100BaseTX> port 0xc100-0xc17f irq 21 at device 5.0 on p
ci3
ste0: global reset never completed
ste0: eeprom failed to come ready
ste1: failed to read station address
device_attach: ste1 attach returned 6
ste2: <D-Link DL10050 10/100BaseTX> port 0xc200-0xc27f irq 22 at device 6.0 on p
ci3
ste0: global reset never completed
ste0: eeprom failed to come ready
ste2: failed to read station address
device_attach: ste2 attach returned 6
ste3: <D-Link DL10050 10/100BaseTX> port 0xc300-0xc37f irq 23 at device 7.0 on p
ci3
ste0: global reset never completed
ste0: eeprom failed to come ready
ste3: failed to read station address
device_attach: ste3 attach returned 6
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xf8000000-0xf80000ff ir
q 22 at device 5.0 on pci2
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:04:61:6f:1c:d1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x
3f6,0x1f0-0x1f7 irq 16 at device 31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
ahc0: No resources allocated.
ahc0: No resources allocated.
ahc0: No resources allocated.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 2399736912 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 114473MB <ST3120026AS/3.05> [232581/16/63] at ata0-master SATA150
acd0: CDRW <ASUS CRW-5232AS/1.01> at ata1-master UDMA33

-- 
WBR,   Alexey G Misurenko ( MAG-RIPE | MMAGG-RIPN )
CTO of Caravan ISP            http://www.caravan.ru
Phone: +7 095 3632252         Cell:  +7 095 5082794



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?418683BD.5040707>