Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Dec 2004 02:14:12 +0100
From:      "Daniel Eriksson" <daniel_k_eriksson@telia.com>
To:        "'Ruslan Ermilov'" <ru@freebsd.org>, "'Soren Schmidt'" <sos@freebsd.org>
Cc:        current@freebsd.org
Subject:   RE: ATA regression
Message-ID:  <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAArxJ5PgcqDkuBy1s4qQ6S8AEAAAAA@telia.com>
In-Reply-To: <20041223221047.GB6049@ip.net.ua>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Ruslan Ermilov wrote:

> Finally, I had time today to track it down to a single
> commit.  So, the following change breaks my Promise
> SATA150 controller:

I'm running a Promise SATA150 TX4 on a recent 6-CURRENT
(2004.12.20.16.00.00) machine without any problems. I only have 3 discs
hooked up to it though (plus 2 more on the on-board VIA SATA =
controller).
Also, I had some problems with ACPI and ATA/SATA on this machine after =
the
last big commit (a few weeks ago) so I turned it off. You might want to =
try
that if you haven't already. The machine is head-less, so I haven't =
tried
re-enabling ACPI since then.

Maybe I should also note that this is the machine that I tried to use
ataraid to create a 1.2TB array. It doesn't work (possible overflow =3D
strange array size). S=F6ren, you might want to look into 1+TB ataraid =
arrays.

/Daniel Eriksson


atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port
0xb000-0xb0ff,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 =
irq 10
at device 14.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port
0x9400-0x94ff,0x9800-0x9803,0xa000-0xa007,0xa400-0xa403,0xa800-0xa807 =
irq 10
at device 14.1 on pci0
ata4: channel #0 on atapci1
ata5: channel #1 on atapci1
atapci2: <VIA 6420 SATA150 controller> port
0x7400-0x74ff,0x7800-0x780f,0x8000-0x8003,0x8400-0x8407,0x8800-0x8803,0x9=
000
-0x9007 irq 5 at device 15.0 on pci0
ata6: channel #0 on atapci2
ata7: channel #1 on atapci2
atapci3: <VIA 8237 UDMA133 controller> port
0x7000-0x700f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 7 at device 15.1 =
on
pci0
ata0: channel #0 on atapci3
ata1: channel #1 on atapci3
...
atapci4: <Promise PDC20318 SATA150 controller> port
0x4400-0x447f,0x4800-0x480f,0x5000-0x503f mem
0xeb800000-0xeb81ffff,0xec000000-0xec000fff irq 12 at device 19.0 on =
pci0
atapci4: failed: rid 0x20 is memory, requested 4
ata8: channel #0 on atapci4
ata9: channel #1 on atapci4
ata10: channel #2 on atapci4
ata11: channel #3 on atapci4
...
ad0: 26059MB <Maxtor 92732U8/RA530JN0> [52946/16/63] at ata0-master =
UDMA66
ad4: 190782MB <ST3200822A/3.01> [387621/16/63] at ata2-master UDMA100
ad5: 190782MB <ST3200822A/3.01> [387621/16/63] at ata2-slave UDMA100
ad6: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-master UDMA100
ad7: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-slave UDMA100
ad8: 190782MB <ST3200822A/3.01> [387621/16/63] at ata4-master UDMA100
ad9: 190782MB <ST3200822A/3.01> [387621/16/63] at ata4-slave UDMA100
ad12: 238475MB <WDC WD2500JD-00HBB0/08.02D08> [484521/16/63] at =
ata6-master
SATA150
ad14: 238475MB <WDC WD2500JD-00HBB0/08.02D08> [484521/16/63] at =
ata7-master
SATA150
ad16: 238475MB <WDC WD2500JD-00FYB0/02.05D02> [484521/16/63] at =
ata8-master
SATA150
ad18: 239372MB <Maxtor 6B250S0/BANC1980> [486344/16/63] at ata9-master
SATA150
ad20: 239372MB <Maxtor 7Y250M0/YAR51EW0> [486344/16/63] at ata10-master
SATA150




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAArxJ5PgcqDkuBy1s4qQ6S8AEAAAAA>