Date: Fri, 24 Dec 2004 02:14:12 +0100 From: "Daniel Eriksson" <daniel_k_eriksson@telia.com> To: "'Ruslan Ermilov'" <ru@freebsd.org>, "'Soren Schmidt'" <sos@freebsd.org> Cc: current@freebsd.org Subject: RE: ATA regression Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAArxJ5PgcqDkuBy1s4qQ6S8AEAAAAA@telia.com> In-Reply-To: <20041223221047.GB6049@ip.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Ruslan Ermilov wrote: > Finally, I had time today to track it down to a single > commit. So, the following change breaks my Promise > SATA150 controller: I'm running a Promise SATA150 TX4 on a recent 6-CURRENT (2004.12.20.16.00.00) machine without any problems. I only have 3 discs hooked up to it though (plus 2 more on the on-board VIA SATA = controller). Also, I had some problems with ACPI and ATA/SATA on this machine after = the last big commit (a few weeks ago) so I turned it off. You might want to = try that if you haven't already. The machine is head-less, so I haven't = tried re-enabling ACPI since then. Maybe I should also note that this is the machine that I tried to use ataraid to create a 1.2TB array. It doesn't work (possible overflow =3D strange array size). S=F6ren, you might want to look into 1+TB ataraid = arrays. /Daniel Eriksson atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port 0xb000-0xb0ff,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 = irq 10 at device 14.0 on pci0 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port 0x9400-0x94ff,0x9800-0x9803,0xa000-0xa007,0xa400-0xa403,0xa800-0xa807 = irq 10 at device 14.1 on pci0 ata4: channel #0 on atapci1 ata5: channel #1 on atapci1 atapci2: <VIA 6420 SATA150 controller> port 0x7400-0x74ff,0x7800-0x780f,0x8000-0x8003,0x8400-0x8407,0x8800-0x8803,0x9= 000 -0x9007 irq 5 at device 15.0 on pci0 ata6: channel #0 on atapci2 ata7: channel #1 on atapci2 atapci3: <VIA 8237 UDMA133 controller> port 0x7000-0x700f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 7 at device 15.1 = on pci0 ata0: channel #0 on atapci3 ata1: channel #1 on atapci3 ... atapci4: <Promise PDC20318 SATA150 controller> port 0x4400-0x447f,0x4800-0x480f,0x5000-0x503f mem 0xeb800000-0xeb81ffff,0xec000000-0xec000fff irq 12 at device 19.0 on = pci0 atapci4: failed: rid 0x20 is memory, requested 4 ata8: channel #0 on atapci4 ata9: channel #1 on atapci4 ata10: channel #2 on atapci4 ata11: channel #3 on atapci4 ... ad0: 26059MB <Maxtor 92732U8/RA530JN0> [52946/16/63] at ata0-master = UDMA66 ad4: 190782MB <ST3200822A/3.01> [387621/16/63] at ata2-master UDMA100 ad5: 190782MB <ST3200822A/3.01> [387621/16/63] at ata2-slave UDMA100 ad6: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-master UDMA100 ad7: 190782MB <ST3200822A/3.01> [387621/16/63] at ata3-slave UDMA100 ad8: 190782MB <ST3200822A/3.01> [387621/16/63] at ata4-master UDMA100 ad9: 190782MB <ST3200822A/3.01> [387621/16/63] at ata4-slave UDMA100 ad12: 238475MB <WDC WD2500JD-00HBB0/08.02D08> [484521/16/63] at = ata6-master SATA150 ad14: 238475MB <WDC WD2500JD-00HBB0/08.02D08> [484521/16/63] at = ata7-master SATA150 ad16: 238475MB <WDC WD2500JD-00FYB0/02.05D02> [484521/16/63] at = ata8-master SATA150 ad18: 239372MB <Maxtor 6B250S0/BANC1980> [486344/16/63] at ata9-master SATA150 ad20: 239372MB <Maxtor 7Y250M0/YAR51EW0> [486344/16/63] at ata10-master SATA150
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAArxJ5PgcqDkuBy1s4qQ6S8AEAAAAA>