Date: Thu, 23 Jan 2014 19:43:14 -0600 From: Dave Duchscher <daved@me.com> To: Darrel <levitch@iglou.com> Cc: Thomas Hoffmann <trh411@gmail.com>, FreeBSD Stable <freebsd-stable@freebsd.org> Subject: Re: freeradius3 error on freebsd10 Message-ID: <56553BCF-B96F-4072-A77F-74010E56BEC0@me.com> In-Reply-To: <alpine.GSO.2.00.1401221146510.22566@shell1> References: <alpine.GSO.2.00.1401221021290.3590@shell1> <CAB7-od=JrsU_LrF6xwzNxxJifFMPEA_YGD3ECU09tqDFJH4f=w@mail.gmail.com> <alpine.GSO.2.00.1401221146510.22566@shell1>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jan 22, 2014, at 10:49 AM, Darrel <levitch@iglou.com> wrote: >=20 >>>=20 >>> Perhaps this should be sent to the freeradius list. I have not = built >>> freeradius3 anywhere else- so not sure. >>>=20 >>> "Errors reading dictionary: dict_init: /usr/local/share/freeradius/ >>> dictionary.dhcp[208]: >>> Type "tlv" can only be for "format=3D1,1". >>>=20 >>> I do not even want the dhcp dictionary. It arrived with the others. >>>=20 >>> The only option I added to the build was "with postgresql support". >>>=20 >>> Anyone familiar with this? >>>=20 >>> Darrel >>=20 >>=20 >> IIRC, that error means you are using a 2.x dictionary with a 3.x = version. >> You should not get that error with a clean 3.x installation. Are you >> installing 3.x over 2.x? If so, I'd suggest wiping the 2.x version = first, >> than installing 3.x. For more in depth info I'd suggest the = freeradius >> lists. >>=20 >> - Tom >=20 > Totally new build. >=20 > /usr/ports/net/freeradius3 >=20 > I just joined the freeradius users list. >=20 > Thank you, > Darrel I dug into this a little to see what is up and I think I have found the = issue. To manually fix your problem, you need to disable the DHCP = dictionary by commenting out this line: $INCLUDE dictionary.dhcp in /usr/local/share/freeradius/dictionary and remove = /usr/local/etc/raddb/mods-enabled/dhcp file. What is going on is that freeradius 3 default setup is with DHCP enabled = and its default configuration is setup that way. The port by default, = disables building with DHCP (currently fails to build properly with DHCP = support) but does not fix up the default configuration. -- DaveD
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56553BCF-B96F-4072-A77F-74010E56BEC0>