Date: Tue, 29 Nov 2005 22:01:01 -0500 From: Forrest Aldrich <forrie@forrie.com> To: Jack Vogel <jfvogel@gmail.com> Cc: freebsd-stable@freebsd.org Subject: Re: device em0 not showing up at boot Message-ID: <438D15ED.60204@forrie.com> In-Reply-To: <2a41acea0511291726h2a90eb91l64700ec16ecba1f5@mail.gmail.com> References: <438B9E14.7040007@forrie.com> <44acfnjzmu.fsf@be-well.ilk.org> <6.2.3.4.0.20051129103951.08abb790@64.7.153.2> <2a41acea0511291726h2a90eb91l64700ec16ecba1f5@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Jack Vogel wrote:
> On 11/29/05, *Mike Tancsa* <mike@sentex.net <mailto:mike@sentex.net>>
> wrote:
>
> At 09:29 AM 29/11/2005, Lowell Gilbert wrote:
> >Forrest Aldrich <forrie@forrie.com <mailto:forrie@forrie.com>>
> writes:
> >
> > > I have an older PC (Compaq AP200) that I'm running FreeBSD-6.0 on.
> > >
> > > I have an Intel Gigabit interface installed in one of the PCI
> slots,
> > > along with another dual 10/100 Intel in another.
> > >
> > > The "em0" device does not show up at boot time, and therefore the
> > > firewall rules fail.
> >
> >It's not detected in the boot messages at all?
>
> What does
> pciconf -lv show ?
>
> ---Mike
>
>
> There are some adapters that are not in the driver. I am the person within
> Intel LAD responsible for FreeBSD, we are going to try and update PCI IDs
> for new devices shortly. If you can report what Mike asked we can see what
> the device is and I might have a patch I can put together.
>
> Cheers,
>
> Jack
>
Hi Jack, Mike,
Thank you for your responses. Sorry it took me a day to get to this.
Here is the output per the above command.
Thanks again,
Forrest
agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03
hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
em0@pci0:13:0: class=0x020000 card=0x11768086 chip=0x10768086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
device = '82547EI Gigabit Ethernet Controller'
class = network
subclass = ethernet
pcib2@pci0:14:0: class=0x060400 card=0x000000dc chip=0x00241011
rev=0x03 hdr=0x01
vendor = 'Digital Equipment Corporation'
device = '21151/2 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
none0@pci0:16:0: class=0x030000 card=0x08003d3d chip=0x000a3d3d
rev=0x01 hdr=0x00
vendor = '3Dlabs, Inc. Ltd'
device = 'Permedia 3'
class = display
subclass = VGA
isab0@pci0:20:0: class=0x060100 card=0x00000000 chip=0x71108086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:20:1: class=0x010180 card=0x00000000 chip=0x71118086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
uhci0@pci0:20:2: class=0x0c0300 card=0x00000000 chip=0x71128086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
piix0@pci0:20:3: class=0x068000 card=0x00000000 chip=0x71138086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
fxp0@pci2:4:0: class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
fxp1@pci2:5:0: class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?438D15ED.60204>