Date: Thu, 30 Mar 2017 05:47:18 +0000 (UTC) From: Ngie Cooper <ngie@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-11@freebsd.org Subject: svn commit: r316229 - stable/11/share/man/man4 Message-ID: <201703300547.v2U5lIC6093435@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: ngie Date: Thu Mar 30 05:47:18 2017 New Revision: 316229 URL: https://svnweb.freebsd.org/changeset/base/316229 Log: Backport mlx4{en,ib}(4) from ^/head MFCing other pieces would be very structurally disruptive. This just brings back the manpages so they can be used by end-users and to ease future backports. svn:mergeinfo omitted, in part because this is a direct commit to ^/stable/11. Sponsored by: Dell EMC Isilon Added: stable/11/share/man/man4/mlx4en.4 - copied unchanged from r316226, stable/11/share/man/man4/mlx4en.4 stable/11/share/man/man4/mlx4ib.4 - copied unchanged from r316226, stable/11/share/man/man4/mlx4ib.4 Modified: stable/11/share/man/man4/Makefile Modified: stable/11/share/man/man4/Makefile ============================================================================== --- stable/11/share/man/man4/Makefile Thu Mar 30 05:44:54 2017 (r316228) +++ stable/11/share/man/man4/Makefile Thu Mar 30 05:47:18 2017 (r316229) @@ -286,6 +286,7 @@ MAN= aac.4 \ mk48txx.4 \ mld.4 \ mlx.4 \ + mlx4en.4 \ mlx5en.4 \ mly.4 \ mmc.4 \ @@ -894,6 +895,10 @@ MAN+= iscsi_initiator.4 MAN+= iser.4 .endif +.if ${MK_OFED} != "no" +MAN+= mlx4ib.4 +.endif + .if ${MK_TESTS} != "no" ATF= ${.CURDIR}/../../../contrib/atf .PATH: ${ATF}/doc Copied: stable/11/share/man/man4/mlx4en.4 (from r316226, stable/11/share/man/man4/mlx4en.4) ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ stable/11/share/man/man4/mlx4en.4 Thu Mar 30 05:47:18 2017 (r316229, copy of r316226, stable/11/share/man/man4/mlx4en.4) @@ -0,0 +1,95 @@ +.\" Copyright (c) 2016 Mellanox Technologies +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS `AS IS' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd March 1, 2017 +.Dt MLX4EN 4 +.Os +.Sh NAME +.Nm mlx4en +.Nd "Mellanox ConnectX-3 10GbE/40GbE network adapter driver" +.Sh SYNOPSIS +To compile this driver into the kernel, +place these lines in your kernel configuration file: +.Bd -ragged -offset indent +.Cd "options COMPAT_LINUXKPI" +.Cd "device mlx4" +.Cd "device mlx4en" +.Ed +.Pp +To load the driver as a module at run-time, +run this command as root: +.Bd -literal -offset indent +kldload mlx4en +.Ed +.Pp +To load the driver as a +module at boot time, place this line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +mlx4en_load="YES" +.Ed +.Sh DESCRIPTION +Mellanox ConnectX adapter cards with Virtual Protocol Interconnect +(VPI) provide the highest performing and most flexible interconnect +solution for Enterprise Data Centers, High-Performance Computing, and +Embedded environments. +Clustered data bases, parallelized applications, transactional +services and high-performance embedded I/O applications will achieve +significant performance improvements resulting in reduced completion +time and lower cost per operation. +.Sh HARDWARE +The +.Nm +driver supports the following network adapters: +.Pp +.Bl -bullet -compact +.It +Mellanox ConnectX-2 (ETH) +.It +Mellanox ConnectX-3 (ETH) +.El +.Sh SUPPORT +For general information and support, +go to the Mellanox support website at: +.Lk http://www.mellanox.com/ . +.Pp +If an issue is identified with this driver and a supported network adapter, +please email the specific information to +.Aq Mt freebsd-drivers@mellanox.com . +.Sh SEE ALSO +.Xr mlx4ib 4 , +.Xr ifconfig 8 +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 9.x . +.Sh AUTHORS +.An -nosplit +The +.Nm +driver was written by +.An Mellanox Technologies <freebsd-drivers@mellanox.com> . Copied: stable/11/share/man/man4/mlx4ib.4 (from r316226, stable/11/share/man/man4/mlx4ib.4) ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ stable/11/share/man/man4/mlx4ib.4 Thu Mar 30 05:47:18 2017 (r316229, copy of r316226, stable/11/share/man/man4/mlx4ib.4) @@ -0,0 +1,95 @@ +.\" Copyright (c) 2016 Mellanox Technologies +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS `AS IS' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd March 1, 2017 +.Dt MLX4IB 4 +.Os +.Sh NAME +.Nm mlx4ib +.Nd "Mellanox ConnectX-3 10GbE/40GbE network adapter driver" +.Sh SYNOPSIS +To compile this driver into the kernel, +place these lines in your kernel configuration file: +.Bd -ragged -offset indent +.Cd "options COMPAT_LINUXKPI" +.Cd "device mlx4" +.Cd "device mlx4ib" +.Ed +.Pp +To load the driver as a module at run-time, +run this command as root: +.Bd -literal -offset indent +kldload mlx4ib +.Ed +.Pp +To load the driver as a +module at boot time, place this line in +.Xr loader.conf 5 : +.Bd -literal -offset indent +mlx4ib_load="YES" +.Ed +.Sh DESCRIPTION +Mellanox ConnectX adapter cards with Virtual Protocol Interconnect +(VPI) provide the highest performing and most flexible interconnect +solution for Enterprise Data Centers, High-Performance Computing, and +Embedded environments. +Clustered data bases, parallelized applications, transactional +services and high-performance embedded I/O applications will achieve +significant performance improvements resulting in reduced completion +time and lower cost per operation. +.Sh HARDWARE +The +.Nm +driver supports the following network adapters: +.Pp +.Bl -bullet -compact +.It +Mellanox ConnectX-2 (IB) +.It +Mellanox ConnectX-3 (IB) +.El +.Sh SUPPORT +For general information and support, +go to the Mellanox support website at: +.Lk http://www.mellanox.com/ . +.Pp +If an issue is identified with this driver and a supported network adapter, +please email the specific information to +.Aq Mt freebsd-drivers@mellanox.com . +.Sh SEE ALSO +.Xr mlx4en 4 , +.Xr ifconfig 8 +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 9.x . +.Sh AUTHORS +.An -nosplit +The +.Nm +driver was written by +.An Mellanox Technologies <freebsd-drivers@mellanox.com> .
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201703300547.v2U5lIC6093435>