Date: Sat, 30 Aug 2008 11:30:22 -0700 From: Sean Bruno <sbruno@miralink.com> To: Christian Hiris <4711@chello.at> Cc: freebsd-ports@freebsd.org Subject: Re: -d 3ware,0 not working with 3ware 9550(sx) Message-ID: <48B991BE.2000607@miralink.com> In-Reply-To: <200808300945.14447.4711@chello.at> References: <48B6E216.30609@miralink.com> <200808300945.14447.4711@chello.at>
next in thread | previous in thread | raw e-mail | index | archive | help
Christian Hiris wrote: > On Thursday 28 August 2008, Sean Bruno wrote: > >> I sent this over to the smartmontools mailing list, but thought I would >> post it here in case anyone else has run into this: >> >> >> Using smartmontools 5.38 under FreeBSD 6/7 doesn't seem to work with the >> following card: >> twa0@pci4:12:0: class=0x010400 card=0x100313c1 chip=0x100313c1 rev=0x00 >> hdr=0x00 >> vendor = '3ware >> Inc.' >> device = '9550SX/9590SE Series SATA2 Raid >> Controller' >> class = mass >> storage >> subclass = RAID >> >> smartctl command output: >> Source # smartctl -d3ware,0 >> /dev/da0 >> smartctl version 5.36 [i386-portbld-freebsd6.3] Copyright (C) 2002-6 >> Bruce Allen >> Home page is >> http://smartmontools.sourceforge.net/ >> >> >> >> Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk >> 0) >> Please contact >> smartmontools-support@lists.sourceforge.net >> Unrecognized escalade_type 4 in freebsd_3ware_command_interface(disk >> 0) >> Please contact >> smartmontools-support@lists.sourceforge.net >> Smartctl: Device Read Identity Failed (not an ATA/ATAPI >> device) >> >> >> >> A mandatory SMART command failed: exiting. To continue, add one or more >> '-T per. >> Source # >> > > Try # smartctl -d3ware,0 /dev/twa0 > ^^^^ > Works here with a 9500S-8 card on FreeBSD 7.0-STABLE. > > Cheers, > ch > > Hmmm ... that didn't seem to work for me: Source # smartctl -d3ware,0 /dev/twa0 smartctl version 5.36 [i386-portbld-freebsd6.3] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Command failed, ata.status=(0x00), ata.command=(0xec), ata.flags=(0x01) WARNING - NO DEVICE FOUND ON 3WARE CONTROLLER (disk 0) Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. Source # uname -a FreeBSD 6.4-PRERELEASE FreeBSD 6.4-PRERELEASE #0 r5811:5829: Thu Aug 28 11:01:38 PDT 2008 sbruno@desdemona.office.miralink.com:/home/sbruno/work/src/ankeny/src/FreeBSD_RELENG6/sys/i386/compile/MIRALINK i386 -- Sean Bruno MiraLink Corporation 6015 NE 80th Ave, Ste 100 Portland, OR 97218 Cell 503-358-6832 Phone 503-621-5143 Fax 503-621-5199 MSN: sbruno@miralink.com Google: seanwbruno@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48B991BE.2000607>