Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 25 Jan 2011 23:34:24 +1000
From:      Da Rock <freebsd-questions@herveybayaustralia.com.au>
To:        freebsd-questions@freebsd.org
Subject:   Re: snd_es137x && no recording from headset micro
Message-ID:  <4D3ED160.1010305@herveybayaustralia.com.au>
In-Reply-To: <20110125132757.GA3479@current.Sisis.de>
References:  <20110125132757.GA3479@current.Sisis.de>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 01/25/11 23:27, Matthias Apitz wrote:
> Hello,
>
> I run FreeBSD 8.x in a VMWare hosted on Win7. The VM presents the Intel
> HDA sound card of the laptop as AudioPCI ES1371-A and I have to use the driver
> snd_es137x(4) which works fine with only the problem that I can not
> manage to record from the headset micro.
>
> The headset micro works fine in Win7 and it switches between the laptop
> build-in micro and the headset micro on plug-in; as well while running
> FreeBSD before as host system on this laptop I could record from both micro (using the
> snd_hda(4) driver.
>
> The output of /dev/sndstat is:
>
> $ cat /dev/sndstat
> FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
> Installed devices:
> pcm0:<AudioPCI ES1371-A>  at io 0x2040 irq 16 kld snd_es137x [MPSAFE] (2p:4v/1r:4v channels duplex default)
>
> i.e. there is only pcm0 and no pcm1 (should it?)
>
> I also tried setting:
>
> # sysctl dev.pcm.0.play.vchans=4
> # sysctl dev.pcm.0.rec.vchans=4
> # sysctl hw.snd.maxautovchans=4
>
> mixer(1) says:
>
> $ mixer
> Mixer vol      is currently set to  85:85
> Mixer pcm      is currently set to 100:100
> Mixer line     is currently set to  90:90
> Mixer mic      is currently set to  83:83
> Mixer cd       is currently set to  83:83
> Mixer rec      is currently set to  72:72
> Mixer igain    is currently set to  90:90
> Mixer line1    is currently set to  83:83
> Mixer phin     is currently set to  86:86
> Mixer video    is currently set to  86:86
> Recording source: mic
>
> and I tried changing to all available recording devices:
>
> $ mixer bla
> ...
> rec devices: vol, line, mic, cd, line1, phin, phout, video
>
> with no luck; any idea how could I record from headset micro?
>
>    
I can't remember too much from Winblow$, but can you tell if VMWare is 
using wdm? Could it be a case of hardware already in use?

Alternatively, could the mixer settings be muted using wdm and the sound 
not coming through?

HTH



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?4D3ED160.1010305>