Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Feb 2000 02:07:59 +0900
From:      "Akinori -Aki- MUSHA" <knu@idaemons.org>
To:        freebsd-current@freebsd.org
Subject:   Promise Ultra66 +  Seagate ATA/66 => Ultra ATA/33 :(
Message-ID:  <86hff1go7k.wl@archon.local.idaemons.org>

next in thread | raw e-mail | index | archive | help
  Hi,

  I'm running recent 4.0-CURRENT and my Seagate Barracuda ST320430A
20GB hard drive connected with Promise Ultra66 card isn't recognized
as an Ultra ATA/66 drive but only /33.

  I'm sure I'm using a correct cable for the /66 drive and I confirmed
it works successfully in /66 on WinNT 4.0.

  Am I missing something or doing wrong?  Any suggestions are welcome.

-- kernel config file --
machine		i386
cpu		I686_CPU
ident		ARCHON
maxusers	32
options 	INET
options 	FFS
options 	FFS_ROOT
options		SOFTUPDATES
options 	MFS
options 	NFS
options 	MSDOSFS
options		NTFS
options		EXT2FS
options 	CD9660
options 	PROCFS
options		NULLFS
options		UNION
options		PORTAL
options 	COMPAT_43
options 	SCSI_DELAY=3000
options 	UCONSOLE
options 	USERCONFIG
options 	VISUAL_USERCONFIG
options 	KTRACE
options 	SYSVSHM
options 	SYSVMSG
options 	SYSVSEM
options 	P1003_1B
options 	_KPOSIX_PRIORITY_SCHEDULING
options		_KPOSIX_VERSION=199309L
options		ICMP_BANDLIM
options		DDB
options 	SMP
options 	APIC_IO
device		isa
device		eisa
device		pci
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		ata
device		atadisk
options 	ATA_STATIC_ID
device		ahc
device		scbus
device		da
device		sa
device		cd
device		pass
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12
device		vga0	at isa?
pseudo-device	splash
device		sc0	at isa?
device		npx0	at nexus? port IO_NPX irq 13
device		apm0    at nexus? disable flags 0x20
device		pcm0
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		ppc0	at isa? irq 7
device		ppbus
device		lpt
device		plip
device		ppi
device		fxp
pseudo-device	loop
pseudo-device	ether
pseudo-device	sl	1
pseudo-device	ppp	1
pseudo-device	tun
pseudo-device	pty	16
pseudo-device	md
pseudo-device	vn
pseudo-device	bpf	4
options         SHMMAXPGS=2049
options		COMPAT_LINUX

-- dmesg output --
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #29: Sat Feb 19 02:21:47 JST 2000
    root@archon.local.idaemons.org:/usr/src/sys/compile/ARCHON
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (451.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268435456 (262144K bytes)
avail memory = 256925696 (250904K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0361000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <Matrox MGA G200 AGP graphics accelerator> mem 0xe1000000-0xe17fffff,0xe0000000-0xe0003fff,0xe4000000-0xe4ffffff at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> at device 7.1 on pci0
ata-pci0: Busmastering DMA not enabled
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 7.2 irq 19
Timecounter "PIIX"  frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xa400-0xa4ff mem 0xe8920000-0xe8920fff irq 17 at device 8.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xa800-0xa81f mem 0xe8800000-0xe88fffff,0xe8921000-0xe8921fff irq 19 at device 9.0 on pci0
fxp0: Ethernet address 00:90:27:14:cf:35
pcm0: <AudioPCI ES1370> port 0xac00-0xac3f irq 18 at device 10.0 on pci0
ata-pci1: <Promise ATA-66 controller> port 0xc000-0xc03f,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb007 mem 0xe8900000-0xe891ffff irq 16 at device 12.0 on pci0
ata2 at 0xb000 irq -1 on ata-pci1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 3 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
ad4: 19569MB <ST320430A> [39761/16/63] at ata2-master using UDMA33
Mounting root from ufs:/dev/da1s1a
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <PIONEER CD-ROM DR-U06S 1.05> Removable CD-ROM SCSI-2 device 
cd0: 19.230MB/s transfers (19.230MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device 
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device 
da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-438 $
/dev/vmmon: Module vmmon: initialized

  Thanks in advance.

-- 
                           /
                          /__  __
                         / )  )  ) )  /
Akinori -Aki- MUSHA aka / (_ /  ( (__(  <knu@idaemons.org>

"If you choose not to decide you still have made a choice."


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86hff1go7k.wl>