Date: Wed, 04 Oct 2000 17:55:58 GMT From: "Flattie McGee" <flattie@globelinks.org> To: stable@freebsd.org Subject: Kernel Compile error on 4.1.1 (with info) Message-ID: <20001004175558.400.qmail@eris.intertech-canada.com>
next in thread | raw e-mail | index | archive | help
Its me again ;)
So I managed to make it through the ordeal of the make world processes (I
forgot to set the BIOS time/date, thanks to the people who helped me, you
know who you are).
Now I'm faced with another problem. Odly enough, I've commented out the USB
support lines in the kernel, and removed the #'s to uncomment them. I've
tried removing the ata drivers..too.
I've provided my Kernel config info, dmesg info as well as the error msg.
---
machine i386
cpu I686_CPU
ident GENERIC
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time
extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
#options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device ppi # Parallel port interface device
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# USB support
device uhci # UHCI PCI->USB interface
device usb # USB Bus (required)
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device pty 16 # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf 5 # Berkeley packet filter
pseudo-device snp 5 # Snoop
---
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-RELEASE #0: Tue Sep 26 00:46:59 GMT 2000
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 100597760 (98240K bytes)
avail memory = 93712384 (91516K bytes)
Preloaded elf kernel "kernel" at 0xc0416000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11
at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 4.3 on pci0
pci0: <SiS 6326 SVGA controller> at 9.0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe800-0xe87f mem
0xd5810000-0xd581007f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:50:da:84:83:88
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xec00-0xecff mem
0xd5811000-0xd5811fff irq 5 at device 13.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <ATAPI CDROM> at ata0-slave using PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 1 lun 0
da0: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
da0: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C)
da1 at ahc0 bus 0 target 4 lun 0
da1: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
xl0: transmission error: 90
xl0: tx underrun, increasing tx start threshold to 120 bytes
xl0: transmission error: 90
xl0: tx underrun, increasing tx start threshold to 180 bytes
xl0: transmission error: 90
xl0: tx underrun, increasing tx start threshold to 240 bytes
---
===> aue
cc -O -pipe -D_KERNEL -Wall -Wredundant-decls -Wnested-externs
-Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline
-Wcast-qual -fformat-extensions -ansi -DKLD_MODULE -nostdinc -I- -I. -I@
-I@/../include -mpreferred-stack-boundary=2 -c
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c:110:
`USB_PRODUCT_DLINK_DSB650' undeclared here (not in a function)
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c:110: initializer element is
not constant
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c:110: (near initialization
for `aue_devs[3].aue_did')
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c: In function
`aue_miibus_statchg':
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c:494:
`USB_PRODUCT_DLINK_DSB650' undeclared (first use in this function)
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c:494: (Each undeclared
identifier is reported only once
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c:494: for each function it
appears in.)
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c: In function `aue_reset':
/usr/src/sys/modules/aue/../../dev/usb/if_aue.c:589:
`USB_PRODUCT_DLINK_DSB650' undeclared (first use in this function)
*** Error code 1
Stop in /usr/src/sys/modules/aue.
*** Error code 1
Stop in /usr/src/sys/modules.
*** Error code 1
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001004175558.400.qmail>