Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 28 Feb 2001 11:51:12 -0500
From:      Mike Tancsa <mike@sentex.net>
To:        stable@freebsd.org
Subject:   Continued panics on a recent STABLE machine
Message-ID:  <4.2.2.20010228114855.03d28be0@marble.sentex.net>

next in thread | raw e-mail | index | archive | help

Not sure if its hardware, but the panics seem to be in the same location 
each time. At first I thought it might be IPSEC, but I got rid of that.


db> trace
m_copym(c0ad3300,3908,5b4,1,ccf5e0c0) at m_copym+0x13c
tcp_output(ccf5e0c0,0,c0ad3300,cca2fcc0,0) at tcp_output+0x838
tcp_usr_send(cca2fcc0,4,c0ad3300,0,0) at tcp_usr_send+0x14a
sosend(cca2fcc0,0,ceb06ed8,c0ad3300,0) at sosend+0x5df
soo_write(c1bc80c0,ceb06ed8,c158ea00,0,ce5aeba0) at soo_write+0x24
dofilewrite(ce5aeba0,c1bc80c0,4,80fc000,4470) at dofilewrite+0xbd
write(ce5aeba0,ceb06f80,28248928,2825a740,80fc000) at write+0x36
syscall2(2f,2f,2f,80fc000,2825a740) at syscall2+0x1f1
Xint0x80_syscall() at Xint0x80_syscall+0x25

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0xadc0fa00
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc017b078
stack pointer           = 0x10:0xceb06d4c
frame pointer           = 0x10:0xceb06d68
code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 7625 (sendmail)
interrupt mask          = net tty
kernel: type 12 trap, code=0
Stopped at      m_copym+0x13c:  movl    0(%edx),%eax



Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0xacc06400
fault code              = supervisor read, page not present
instruction pointer     = 0x8:0xc01b7c8c
stack pointer           = 0x10:0xce639dc0
frame pointer           = 0x10:0xce639e34
code segment            = base 0x0, limit 0xfffff, type 0x1b
                         = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 32323 (cc1)
interrupt mask          = net tty
kernel: type 12 trap, code=0
Stopped at      tcp_output+0x658:       movl    0(%edx),%eax
db> trace
tcp_output(ccf5f2e0,0,c0a74020,ffff0000,0) at tcp_output+0x658
tcp_input(c0ab5a00,14,6,c0ab5a00,400400) at tcp_input+0x2233
ip_input(c0ab5a00) at ip_input+0x7fb
ipintr(c0276c80,400400,c0289a2a,c028953b,400400) at ipintr+0x4b
swi_net_next(c0a34820,0,2f,2f,2f) at swi_net_next
Xresume10() at Xresume10+0x2b
--- interrupt, eip = 0x8076319, esp = 0xce639fe0, ebp = 0xbfbfe7c0 ---
db>


FreeBSD 4.2-STABLE #3: Tue Feb 27 21:16:15 EST 2001
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (448.62-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x653  Stepping = 3
   Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M 
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, 
CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268427264 (262136K bytes)
avail memory = 257769472 (251728K bytes)
Preloaded elf kernel "kernel" at 0xc036a000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <VGA-compatible display device> at 0.0 irq 5
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on 
pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x850-0x85f at 
device 7.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecdf mem 
0xfe000000-0xfe0fffff,0xf6000000-0xf6000fff irq 10 at device 14.0 on pci0
fxp0: Ethernet address 00:a0:c9:d6:db:ba
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 
0xfe100000-0xfe10007f irq 10 at device 17.0 on pci0
xl0: Ethernet address: 00:c0:4f:68:13:88
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <DEC 21152 PCI-PCI bridge> at device 19.0 on pci0
pci2: <PCI bus> on pcib3
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci3: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
DUMMYNET initialized (010124)
IP packet filtering initialized, divert enabled, rule-based forwarding 
enabled, default to deny, logging limited to 22100 packets/entry by default
IPv6 packet filtering initialized, logging limited to 1000 packets/entry
ad0: 19473MB <Maxtor 52049H4> [39566/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
--------------------------------------------------------------------
Mike Tancsa,                          	          tel +1 519 651 3400
Network Administration,     			  mike@sentex.net
Sentex Communications                 		  www.sentex.net
Cambridge, Ontario Canada			  www.sentex.net/mike


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.20010228114855.03d28be0>