Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Jun 2005 14:34:23 +0200
From:      Thomas Beer <nohuman@gmail.com>
To:        Pascal Groenen <pascal@blackwillow.giznet.com>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: Simultaneously two versions of one port?
Message-ID:  <5e51d2fd05062405347d51a753@mail.gmail.com>
In-Reply-To: <20050624122250.M77287@blackwillow.giznet.com>
References:  <5e51d2fd05062405175d78aa4f@mail.gmail.com> <20050624122250.M77287@blackwillow.giznet.com>

next in thread | previous in thread | raw e-mail | index | archive | help
> either, 'cd'  to the port that is causing the problem, devel/py-orbit2, i=
n
> this case and type 'make deinstall', than go back to your original port a=
nd
> issue a make again

What's with existing dependencies?

>=20
> or, 'cd' to the port that is causing the problem, devel/py-orbit2, in thi=
s
> case and type 'make -DFORCE_PKG_REGISTER install clean'. This forces an
> upgrade of the troublesome port, but may result in a double registered po=
rt.
> This can be checked by issuing 'pkgdb -F'
>=20
> Good luck,
>=20
> Pascal
>=20
> On Fri, 24 Jun 2005 14:17:29 +0200, Thomas Beer wrote
> > Dear All,
> >
> > I'm trying to install gdesklets which depends on
> > py24-orbit. However, py23-orbit is already
> > installed. I googled and tryed various ways
> > with portupgrade et al. What to do?
> >
> > Thanks Tom
> >
> > [root@lap gdesklets]# make install
> > =3D=3D=3D>   gdesklets-0.34.3 depends on file: /usr/local/bin/python - =
found
> >
> > <---snip--->
> >
> > =3D=3D=3D>  Installing for py24-orbit-2.0.1_1
> > =3D=3D=3D>   py24-orbit-2.0.1_1 depends on file: /usr/local/bin/python2=
.4 - found
> > =3D=3D=3D>   py24-orbit-2.0.1_1 depends on executable: pkg-config - fou=
nd
> > =3D=3D=3D>   py24-orbit-2.0.1_1 depends on shared library: glib-2.0.600=
 - found
> > =3D=3D=3D>   py24-orbit-2.0.1_1 depends on shared library: IDL-2.0 - fo=
und
> > =3D=3D=3D>   py24-orbit-2.0.1_1 depends on shared library: ORBit-2.0 - =
found
> > =3D=3D=3D>   Generating temporary packing list
> > =3D=3D=3D>  Checking if devel/py-orbit2 already installed
> > =3D=3D=3D>   An older version of devel/py-orbit2 is already installed
> > (py23-orbit-2.0.1_1)
> >      You may wish to ``make deinstall'' and install this port again
> >      by ``make reinstall'' to upgrade it properly.
> >      If you really wish to overwrite the old port of devel/py-orbit2
> >      without deleting it first, set the variable "FORCE_PKG_REGISTER"
> >      in your environment or the "make install" command line.
> > *** Error code 1
> >
> > Stop in /usr/ports/devel/py-orbit2.
> > *** Error code 1
> >
> > Stop in /usr/ports/x11-toolkits/py-gnome2.
> > *** Error code 1
> >
> > Stop in /usr/ports/deskutils/gdesklets.
> >
> > --
> > --  Which is worse:  ignorance or apathy?
> > --  Don't know.  Don't care.
> > _______________________________________________
> > freebsd-stable@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.or=
g"
>=20
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>=20


--=20
--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5e51d2fd05062405347d51a753>