Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 15 Feb 2017 16:45:55 +0000
From:      Roger Pau =?iso-8859-1?Q?Monn=E9?= <royger@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Cc:        davidch@FreeBSD.org, edavis@broadcom.com, davidch@broadcom.com, zambrano@broadcom.com
Subject:   Re: svn commit: r313771 - head/sys/dev/bxe
Message-ID:  <20170215164555.hvhpsh5s57ukf323@dhcp-3-221.uk.xensource.com>
In-Reply-To: <201702151434.v1FEYejW075993@repo.freebsd.org>
References:  <201702151434.v1FEYejW075993@repo.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Feb 15, 2017 at 02:34:40PM +0000, Roger Pau Monné wrote:
> Author: royger
> Date: Wed Feb 15 14:34:40 2017
> New Revision: 313771
> URL: https://svnweb.freebsd.org/changeset/base/313771
> 
> Log:
>   bxe: enable usage with NetXtreme II BCM57840 2x20GbE chip

FWIW, I see the following message at boot:

bxe0: <QLogic NetXtreme II BCM57840 2x20GbE (B1) BXE v:1.78.89
> mem 0x93800000-0x93ffffff,0x93000000-0x937fffff,0x95000000-0x9500ffff irq 16 at device 0.0 numa-domain 0 on pci5
bxe0: PCI BAR0 [10] memory allocated: 0x93800000-0x93ffffff (8388608) -> 0xfffff80093800000
bxe0: PCI BAR2 [18] memory allocated: 0x93000000-0x937fffff (8388608) -> 0xfffff80093000000
bxe0: PCI BAR4 [20] memory allocated: 0x95000000-0x9500ffff (65536) -> 0xfffff80095000000
bxe0: ERROR: Invalid config for Switch Dependent mode
bxe0: Found 10GBase-CX4 media.
bxe0: Using defaults for TSO: 65518/35/2048
bxe0: bpf attached
bxe0: Ethernet address: 5c:b9:01:da:XX:XX
bxe0: attempting to allocate 5 MSI-X vectors (32 supported)
msi: routing MSI-X IRQ 264 to local APIC 34 vector 48
msi: routing MSI-X IRQ 265 to local APIC 36 vector 48
msi: routing MSI-X IRQ 266 to local APIC 38 vector 48
msi: routing MSI-X IRQ 267 to local APIC 40 vector 48
msi: routing MSI-X IRQ 268 to local APIC 48 vector 48
bxe0: using IRQs 264-268 for MSI-X
bxe0: MSI-X vectors Requested 5 and Allocated 5
random: harvesting attach, 8 bytes (4 bits) from bxe0
bxe1: <QLogic NetXtreme II BCM57840 2x20GbE (B1) BXE v:1.78.89
> mem 0x94800000-0x94ffffff,0x94000000-0x947fffff,0x95010000-0x9501ffff irq 17 at device 0.1 numa-domain 0 on pci5
bxe1: PCI BAR0 [10] memory allocated: 0x94800000-0x94ffffff (8388608) -> 0xfffff80094800000
bxe1: PCI BAR2 [18] memory allocated: 0x94000000-0x947fffff (8388608) -> 0xfffff80094000000
bxe1: PCI BAR4 [20] memory allocated: 0x95010000-0x9501ffff (65536) -> 0xfffff80095010000
bxe1: ERROR: Invalid config for Switch Dependent mode
bxe1: Found 10GBase-CX4 media.
bxe1: Using defaults for TSO: 65518/35/2048
bxe1: bpf attached
bxe1: Ethernet address: 5c:b9:01:da:XX:XX
bxe1: attempting to allocate 5 MSI-X vectors (32 supported)
msi: routing MSI-X IRQ 269 to local APIC 50 vector 48
msi: routing MSI-X IRQ 270 to local APIC 52 vector 48
msi: routing MSI-X IRQ 271 to local APIC 54 vector 48
msi: routing MSI-X IRQ 272 to local APIC 56 vector 48
msi: routing MSI-X IRQ 273 to local APIC 0 vector 58
bxe1: using IRQs 269-273 for MSI-X
bxe1: MSI-X vectors Requested 5 and Allocated 5

But the card seems to be working fine AFAIK (I'm not able to do any kind of
benchmarking anyway). Adding the Broadcom guys in case they can provide some
input on this error message.

Thansk, Roger.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20170215164555.hvhpsh5s57ukf323>