Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 8 May 2013 19:33:13 +0000
From:      John <>
To:        FreeBSD SCSI <>
Cc:        Alexander Motin <>, "Kenneth D. Merry" <>
Subject:   Re: Repeated msgs & kernel panic w/ r246437 (Revamp the CAM enclosure services driver)
Message-ID:  <>
In-Reply-To: <>
References:  <> <> <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
----- Kenneth D. Merry's Original Message -----
> > On 22.04.2013 06:00, John wrote:
> > >Hi Folks,
> > >
> > >    After updating one of our servers to the latest stable image,
> > >it appears that commit r246437 appears to be causing it to panic.

> I agree.  I added the xpt_create_path_unlocked() call to fix a
> panic with a stack trace just like the one above.  It looks like a problem
> due to running r246437 exactly.

   As noted above, the system panics with the latest stable image. We
simply started backing off commits until we found where the system
no longer panic'd.

   Side note: is there a way to disable the new daemon that I haven't
seen? sysctl? loader config?

   Apologies for the delay - here is the stable information:

'working' tag - has 1 of the external LSI cards disabled (so only 1 path through the shelves).
'broken' tag - has both cards enabled and panics in short order.

Both of these are with a stable build (r249895)

Some db output:

Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 04
fault virtual address   = 0x0
fault code              = supervisor read data, page not present
instruction pointer     = 0x20:0xffffffff80ce7db8
stack pointer           = 0x28:0xffffff975fe55a00
frame pointer           = 0x28:0xffffff975fe55a30
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (thread taskq)
[ thread pid 0 tid 100035 ]
Stopped at      memcpy+0x8:     repe movsq      (%rsi),%es:(%rdi)

db> bt
Tracing pid 0 tid 100035 td 0xfffffe00262f4490
memcpy() at memcpy+0x8/frame 0xffffff975fe55a30
xpt_getattr() at xpt_getattr+0xed/frame 0xffffff975fe55b40
pass_add_physpath() at pass_add_physpath+0xdf/frame 0xffffff975fe55b70
taskqueue_run_locked() at taskqueue_run_locked+0x74/frame 0xffffff975fe55bc0
taskqueue_thread_loop() at taskqueue_thread_loop+0x46/frame 0xffffff975fe55be0
fork_exit() at fork_exit+0x11f/frame 0xffffff975fe55c30
fork_trampoline() at fork_trampoline+0xe/frame 0xffffff975fe55c30
--- trap 0, rip = 0, rsp = 0xffffff975fe55cf0, rbp = 0 ---

   broken.txt contains more db trace info.


Want to link to this message? Use this URL: <>