Date: Fri, 20 Jan 2012 14:21:28 +0100 From: Matthieu Volat <mazhe@alkumuna.eu> To: freebsd-stable@freebsd.org Subject: 9.0-Release and Asus P5-NE motherboard Message-ID: <20120120142128.0c6ba578.mazhe@alkumuna.eu>
next in thread | raw e-mail | index | archive | help
Hello, For a week, I have been trying to boot the FreeBSD 9 installation media (usb, cdrom) on a computer with an Asus P5-NE motherboard (amd64, nvidia MCP51 controller), but the kernel fails to initialize correctly. Using the verbose mode, I was able to capture the following warnings/errors : ahcich0: AHCI reset... ugen0.1: <nVidia> at usbu0 uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <nVidia> at usbu1 uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ahacih0: SATA connect timeout time=10000us status=00000000 ahacih0: AHCI reset: device not found ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x30000 (aprobe0:ata0:0:0:0): SIGNATURE: eb14 ata1: reset tp1 mask=03 ostat0=60 ostat1=70 ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata1: reset tp2 stat0=20 stat1=30 devices=0x0 ata2: SATA connect time=0ms status=00000123 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 (aprobe1:ata2:0:0:0): SIGNATURE: 0000 ata3: SATA connect time=0ms status=00000123 ata3: reset tp1 mask=01 ostat0=50 ostat1=00 uhub0: 8 ports with 8 removable, self powered ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 (aprobe2:ata3:0:0:0): SIGNATURE: 0000 ata4: SATA connect timeout status=0000000 ata5: SATA connect timeout status=0000000 uhub1: 8 ports with 8 removable, self powered usb_alloc_device: net address 2 failed (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00 ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00 ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00 [message repeated a lot of times] ata3: reset tp2 stat0=d8 stat1=00 devices=0x0 (aprobe2:ata3:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe2:ata3:0:0:0): CAM status: Command timeout ata0: reset tp1 mask=03 ostat0=58 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x30000 (aprobe0:ata0:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata0:0:0:0): CAM status: Command timeout (aprobe0:ata0:0:1:0): SIGNATURE: eb14 ata2: SATA connect time=0ms status=00000123 ata2: reset tp1 mask=01 ostat0=58 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 (aprobe1:ata:ata2:0:0:0) ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe1:ata:ata2:0:0:0) CAM status: Command timeout run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config ugen1.2: <Unknown> at usbus1 (disconnected) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) ata0: reset tp1 mask=03 ostat0=00 ostat1=58 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=00 stat1=00 devices=0x30000 (aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata0:0:1:0): CAM status: Command timeout run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config This machine worked (and still works) fine with 8.2... If somebody have an idea... -- Matthieu Volat <mazhe@alkumuna.eu>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120120142128.0c6ba578.mazhe>