Date: Thu, 13 Jun 2002 11:39:48 -0400 (EDT) From: Eric Gatenby <eric@gatenby.org> To: freebsd-stable@FreeBSD.ORG Subject: Large IDE Hard drives Message-ID: <Pine.LNX.4.43.0206131106100.29190-100000@project-w.com>
next in thread | raw e-mail | index | archive | help
Hi,
I just added an 80G Western Digital HD into my freebsd-stable box,
which was recompiled on Tuesday. After I fdisk and disklabel it, I
repeatedly get these errors on the console when the disk is under any
load:
ad6: READ command timeout tag=0 serv=0 - resetting
After some time, the system locks up and a hard reset is required.
The disk itself appears fine -- I've run it through the WD test tools and it
has passed. I've installed it into a WinXP system with the exact same
motherboard and HDD controller and ran tests, and it worked.
The disk is a Western Digital 80G JB drive, with an 8M cache and a UDMA/133
interface. It is installed on a Highpoint HPT-366 UDMA/66 controller
integrated on my Abit BP6 motherboard. It is installed as the only device
(as master) on the second IDE port of the controller.
What could be causing these errors and lockups? The problem existed befre I
recompiled on Tuesday. My previous build of 4.6-RC was done around May 3rd.
Below is some hopefully useful info. If anything more is needed, or if I
should try anything, please let me know.
> sysctl hw.ata
hw.ata.ata_dma: 1
hw.ata.wc: 1
hw.ata.tags: 0
hw.ata.atapi_dma: 0
> dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RC #1: Tue Jun 11 21:19:01 EDT 2002
root@triassic.mesozoic.net:/usr/obj/usr/src/sys/MESOZOIC_SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
avail memory = 256245760 (250240K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04c5000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fd7e0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 18 -> irq 10
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
IOAPIC #0 intpin 16 -> irq 11
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0
atapci0: ATA channel disabled by BIOS
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xa000-0xa01f irq 2 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xa400-0xa43f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:60:08:1f:bf:f0
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xd9000000-0xd90000ff irq 2 at device 17.0 on pci0
rl0: Ethernet address: 00:48:54:4b:f3:19
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT366 ATA66 controller> port 0xb400-0xb4ff,0xb000-0xb003,0xac00-0xac07 irq 10 at device 19.0 on pci0
ata2: at 0xac00 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807 irq 10 at device 19.1 on pci0
ata3: at 0xb800 on atapci2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xef000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ata3-slave: ATA identify retries exceeded
SMP: AP CPU #1 Launched!
ad4: 19470MB <IBM-DJNA-352030> [39560/16/63] at ata2-master UDMA66
ad6: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata3-master UDMA66
Mounting root from ufs:/dev/ad4s1a
--
Eric Gatenby | eric@gatenby.org | AIM: egatenby
http://eric.gatenby.org/ | PGP: 0x9EA39CC7 |
The search for happiness is one of the chief sources of unhappiness.
- Eric Hoffer
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.43.0206131106100.29190-100000>