Date: 31 Jul 2003 06:44:36 -0000 From: async@ript.net To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/55097: BUSLink BusDrive Support (umass) Message-ID: <20030731064436.81750.qmail@pants.ript.net> Resent-Message-ID: <200307310640.h6V6eChp083989@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 55097 >Category: kern >Synopsis: BUSLink BusDrive Support (umass) >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Wed Jul 30 23:40:12 PDT 2003 >Closed-Date: >Last-Modified: >Originator: Michael Hoisie <async@ript.net> >Release: FreeBSD 5.1-CURRENT-20030628-JPSNAP >Organization: >Environment: System: FreeBSD 5.1-CURRENT-20030628-JPSNAP #8: Mon Jul 28 21:15:36 MDT 2003 root@localhost:/usr/obj/usr/src/sys/TRACKSTAR >Description: The BUSlink BusDrive (pen usb drive) is unsupported in FreeBSD. >How-To-Repeat: Plus in any model BusDrive into the USB port and you will be faced with an endless stream of CAM errors. Try and mount it with mount_msdos and you get more errors. >Fix: add the following to /usr/src/sys/cam/scsi/scsi_da.c (in the quirks entry): Note, this patch does NOT work in 4.8-stable. The BusDrive crashes 4.8-stable. This matter will be further investigated. { /* * Buslink Dusdrive */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "BusDrive", "*", "*"}, /*quirks*/ DA_Q_NO_6_BYTE|DA_Q_NO_SYNC_CACHE }, --- dmesg.txt begins here --- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20030628-JPSNAP #8: Mon Jul 28 21:15:36 MDT 2003 root@localhost:/usr/obj/usr/src/sys/TRACKSTAR Preloaded elf kernel "/boot/kernel/kernel" at 0xc0460000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc04601f4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04602a0. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 696972514 Hz CPU: Intel Pentium III (696.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536805376 (511 MB) avail memory = 516591616 (492 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL I 5000 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fdf50 Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 7 INTD is routed to irq 5 pcib0: slot 8 INTA is routed to irq 5 pcib0: slot 16 INTA is routed to irq 5 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1225 PCI-CardBus Bridge> mem 0x88000000-0x88000fff at device 4.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: slot 4 INTA is routed to irq 11 cbb1: <TI1225 PCI-CardBus Bridge> mem 0x88001000-0x88001fff at device 4.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: slot 4 INTA is routed to irq 11 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: BUSlink Inc. USB Hub, class 9/0, rev 1.10/0.01, addr 2 uhub1: 2 ports with 0 removable, self powered umass0: BUSlink Inc. USB Mass Storage, rev 1.10/0.01, addr 3 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <multimedia, audio> at device 8.0 (no driver attached) pci0: <simple comms> at device 16.0 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1287: *** Error: Method execution failed [\\_SB_.BAT1._STA] (Node 0xc4027060), AE_ERROR ata1-slave: timeout waiting for interrupt ata1-slave: ATA identify failed ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33 acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata1-master PIO4 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <BusDrive 1.00> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C) Mounting root from ufs:/dev/ad0s2a --- dmesg.txt ends here --- >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030731064436.81750.qmail>