Date: Sat, 7 Jun 2014 21:33:40 +0200 From: "Dutch Ingraham" <stoa@gmx.us> To: "Konstantin Belousov" <kostikbel@gmail.com> Cc: freebsd-hackers@freebsd.org Subject: [SOLVED] Re: Fwd: Interrupt Overload Message-ID: <trinity-42b39502-69e6-4d77-8230-a7f710654a49-1402169619685@3capp-mailcom-lxa05> In-Reply-To: <20140607184126.GQ3991@kib.kiev.ua> References: <538A3432.5010303@gmx.us> <53930E19.8090603@gmx.us> <53931963.4040604@selasky.org> <53932314.6010108@gmx.us> <1402153691.709851721.u6k6kkkk@frv35.fwdcdn.com> <53933110.8060300@gmx.us> <1402157083.156846225.m95e69ke@frv35.fwdcdn.com> <53934250.1090403@gmx.us> <20140607175752.GP3991@kib.kiev.ua> <trinity-7a7ae44c-b0f3-4903-9235-60fc64b981d3-1402165268139@3capp-mailcom-lxa12>, <20140607184126.GQ3991@kib.kiev.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
> Sent: Saturday, June 07, 2014 at 2:41 PM > From: "Konstantin Belousov" <kostikbel@gmail.com> > To: "Dutch Ingraham" <stoa@gmx.us> > Cc: freebsd-hackers@freebsd.org > Subject: Re: Fwd: Interrupt Overload > > On Sat, Jun 07, 2014 at 08:21:08PM +0200, Dutch Ingraham wrote: > > > > > > > Sent: Saturday, June 07, 2014 at 1:57 PM > > > From: "Konstantin Belousov" <kostikbel@gmail.com> > > > To: "Dutch Ingraham" <stoa@gmx.us> > > > Cc: freebsd-hackers@freebsd.org > > > Subject: Re: Fwd: Interrupt Overload > > > > > > On Sat, Jun 07, 2014 at 12:48:16PM -0400, Dutch Ingraham wrote: > > > > On 06/07/2014 12:04 PM, Vladislav Prodan wrote: > > > > > > > > > > > > > > > > > > > > --- Original message --- > > > > > From: "Dutch Ingraham" <stoa@gmx.us> > > > > > Date: 7 June 2014, 18:33:12 > > > > > > > > > > > > > > >> > > > > >> Thanks for the response. > > > > >> > > > > >> The output you requested: > > > > >> > > > > >> kern.eventtimer.choice: HPET1 (440) HPET2 (440) HPET3 (440) HPET4 (440) > > > > >> HPET5 (440) HPET6 (440) LAPIC (400) i8254 (100) RTC (0) > > > > >> > > > > >> kern.eventtimer.choice: HPET (did not specify 1, 2, etc.) > > > > >> > > > > >> I also changed the type of timer to LAPIC and rebooted; there was no > > > > >> appreciable change in the interrupt activity. > > > > > > > > > > After reboot what became timer? :) > > > > > > > > > > You can change the timer "on the fly", without rebooting the system. > > > > > > > > > > If LAPIC does not help, then try other timers. > > > > > > > > > > > > > > > -- > > > > > Vladislav V. Prodan > > > > > System & Network Administrator > > > > > support.od.ua > > > > > > > > > > _______________________________________________ > > > > > freebsd-hackers@freebsd.org mailing list > > > > > http://lists.freebsd.org/mailman/listinfo/freebsd-hackers > > > > > To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" > > > > > > > > > > > > > You're right, it is not persistent. I changed to each different event > > > > timer and the only one that made a difference was the i8254; that > > > > dropped the cpu load from 30% to 10-12%. Much better, but still of > > > > course not acceptable for a Core II-Duo running at 3.0GHz. The load > > > > averages shown in <top> do also drop proportionally. Interestingly, > > > > though, <systat -vmstat> shows the same interrupt rate - 325K/sec. > > > > > > > > What do you make of the fact that when I suspend with <<acpiconf -s 3> > > > > and then wake-up, everything is absolutely normal, regardless of event > > > > timer type? > > > > > > You did not shown _useful_ output of vmstat -i. Do it when the storm > > > occurs. Also, show the pciconf -lvc output on the machine. > > > > > > > Sorry - I was entering that output by hand, so truncated what I thought was not useful. > > In addition, the storm is always occurring, unless I put the machine to sleep and then wake-up. > > > > Here is the full vmstat -i: > > > > dutch:~:# vmstat -i > > interrupt total rate > > irq1: atkbd0 48 0 > > irq0: attimer0 12236927 1178 > > irq8: atrtc0 146537 14 > > irq16: uhci0 3362560857 323946 > > irq18: atapci0+ 19828 1 > > irq23: uhci3 ehci1 2 0 > > cpu0:timer 163301 15 > > irq256: hpet0:t0 4516011 435 > > irq257: hpet0:t1 83960 8 > > irq264: em0 31799 3 > > irq265: hdac0 95 0 > > irq266: ahci0:ch0 8423 0 > > irq267: ahci0:ch1 15620 1 > > cpu1:timer 1229 0 > > irq274: vgapci0 10041 0 > > Total 3379794678 325606 > > dutch:~:# > > > > And here is pciconf -lvc: > > > > dutch:~:# pciconf -lvc > > hostb0@pci0:0:0:0: class=0x060000 card=0x04201028 chip=0x2e108086 rev=0x03 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '4 Series Chipset DRAM Controller' > > class = bridge > > subclass = HOST-PCI > > cap 09[e0] = vendor (length 12) Intel cap 6 version 1 > > pcib1@pci0:0:1:0: class=0x060400 card=0x04201028 chip=0x2e118086 rev=0x03 hdr=0x01 > > vendor = 'Intel Corporation' > > device = '4 Series Chipset PCI Express Root Port' > > class = bridge > > subclass = PCI-PCI > > cap 0d[88] = PCI Bridge card=0x04201028 > > cap 01[80] = powerspec 3 supports D0 D3 current D0 > > cap 05[90] = MSI supports 1 message > > cap 10[a0] = PCI-Express 2 root port slot max data 128(128) link x0(x16) > > speed 0.0(5.0) ASPM disabled(L0s) > > ecap 0002[100] = VC 1 max VC0 > > ecap 0005[140] = Root Complex Link Declaration 1 > > vgapci0@pci0:0:2:0: class=0x030000 card=0x04201028 chip=0x2e128086 rev=0x03 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '4 Series Chipset Integrated Graphics Controller' > > class = display > > subclass = VGA > > cap 05[90] = MSI supports 1 message enabled with 1 message > > cap 01[d0] = powerspec 2 supports D0 D3 current D0 > > Try to set the tunable hw.drm.msi to 0 before i915 driver is loaded. > I.e. the easiest is to set it at loader prompt. If you load driver > by starting Xorg, then kenv hw.drm.msi=0 would be enough. > > Either way, helped it or not, post the vmstat -i output while the Xorg > is running. > BEAUTIFUL!! Knocked the uhci interrupts to normal. Here is the >vmstat -i> with X running and hw.drm.msi=0 set: dutch@dutch:~ % vmstat -i interrupt total rate irq1: atkbd0 48 0 irq16: uhci0+ 167 1 irq18: atapci0+ 344 3 irq23: uhci3 ehci1 2 0 irq256: hpet0:t0 10675 111 irq257: hpet0:t1 5897 61 irq264: em0 341 3 irq265: hdac0 95 0 irq266: ahci0:ch0 4274 44 irq267: ahci0:ch1 155 1 Total 21998 229 dutch@dutch:~ % HPETs are a little high, but overall 1000% better. I have added to my /boot/loader.conf. I see where this was discussed back in the 7.2R release notes, but I would have never found it. Many thanks for your help.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?trinity-42b39502-69e6-4d77-8230-a7f710654a49-1402169619685>