Date: Fri, 23 May 1997 12:17:39 -0600 From: Joshua Fielden <shag@concentric.net> To: hackers@FreeBSD.ORG Subject: Re: SCSI tape config Message-ID: <3385DF43.7AF874CD@concentric.net> References: <199705222322.QAA15372@superior.mooseriver.com> <19970523084907.AC18072@uriah.heep.sax.de>
next in thread | previous in thread | raw e-mail | index | archive | help
J Wunsch wrote: > > As Josef Grosch wrote: > > > I've got this old Wangtek tape drive that handles QIC-150 tapes. THis drive > > came out of an old Sun shoebox and has an adapter board to allow a SCSI > > controller to driver it. My question is how does one set the SCSI id. There > > are a number of jumpers on the adapter board, which was made by > > Emulex. Does anyone know anthing about these? > > AFAIK, you can't. I've recently tried this at somebody where i was > giving a training course, and the outcome of their technicians was > that this old Emulex adapter is frozen to SCSI ID 4. > > The drive itself should be QIC-02, so if you've got an interface card > for this, you could use it directly with the wt(4) driver. > > -- > cheers, J"org > > joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE > Never trust an operating system you don't have sources for. ;-) <rummaging through SUN Field Admin's Handbook> I must concur that it is stuck at that ID. If you want all the DIP and jumper settings, though, lemme know. I knew there was a reason I kept those books. :-) -- SCSI is *not* magic. There are many technical reasons why it is occasionally nessicary to sacrifice a small goat to your SCSI chain. -- Joshua Fielden
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3385DF43.7AF874CD>