Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 6 Dec 2009 10:06:05 -0800 (PST)
From:      Ivo Karabojkov <>
Subject:   Re: won't boot after 8.0-RELEASE upgrade
Message-ID:  <>
In-Reply-To: <>
References:  <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help

I don't think it's FreeBSD update. I always use CVSup and build world. So I
fall into the same hole with no way up.
I use gmirror, my device names are full including slice (e.g.
/dev/mirror/gm0s1a and it was produced from /dev/ad4s1a some years ago), so
I think I'm not using =E2=80=9Cdangerously dedicated=E2=80=9D mode...

After the update I'm unable to mount root. Thanks God I have my old (7.2
release) kernel...

Since I have some servers to manage I am very interested how should I
upgrade to 8.0 Rel?

Thanks in advance for all your advices!


Tom Worster wrote:
> after running freebsd-update -r 8.0-RELEASE upgrade my system won't boot.
> it
> gets stuck on mountroot and i can't find the magic word it wants.
> the system used to have two sata drives /dev/ad4 and ad6. they were
> partitioned and sliced using the deafaults that sysinstall suggested.
> at the boot prompt, lsdev says:
> disk devices
>   disk0: BIOS drive C:
>     disk0s1a: FFS
>     disk0s1b: swap
>     disk0s1d: FFS
>     disk0s1e: FFS
>     disk0s1f: FFS
>    disk1: BIOS drive D:
>     disk1s1a: FFS
>     disk1s1b: swap
>     disk1s1d: FFS
>     disk1s1e: FFS
>     disk1s1f: FFS
> which looks right, although i'm not familiar with the "disk" nomenclature=
> entering ? at mountroot mentions ad4 and ad6.
> geom_mirror was being used.
> i've tried saying "load geom_mirror" and/or "enable-module geom_mirror" a=
> the boot prompt. neither made any difference.
> nothing i've said to mountroot works:
> ufs:/dev/ad4s1a
> ufs:/dev/ad6s1a
> ufs:/dev/mirror/gm0s1a
> ufs:/dev/disk0s1a
> ufs:/dev/disk1s1a
> does anyone know the magic word? i'd be very grateful.
> tom
> _______________________________________________
> mailing list
> To unsubscribe, send any mail to
> ""

View this message in context:
Sent from the freebsd-questions mailing list archive at

Want to link to this message? Use this URL: <>