Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 8 Feb 1996 12:33:45 -0800
From:      "Ulf Zimmermann" <ulf@z-code.ncd.com>
To:        Terry Lambert <terry@lambert.org>, ulf@z-code.ncd.com (Ulf Zimmermann)
Cc:        gjennejohn@frt.dec.com, bertus%mikom.csir.co.za@inet-gw-1.pa.dec.com, questions%freebsd.org@inet-gw-1.pa.dec.com
Subject:   Re: ISDN devices supported?
Message-ID:  <9602081233.ZM749@zolaris.z-code.com>
In-Reply-To: Terry Lambert <terry@lambert.org> "Re: ISDN devices supported?" (Feb  8, 13:17)
References:  <199602082017.NAA08536@phaeton.artisoft.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Feb 8, 13:17, Terry Lambert wrote:
> Subject: Re: ISDN devices supported?
> > > A TA is the most flexible solution since the German cards are designed
> > > for EuroISDN (the European ISDN standard) and there's no guarantee that
> > > they'll work correctly outside of Europe.
> >
> > This is not quite right anymore. The so called EuroISDN is now DSS-1,
> > which is also used by many countries outside europe. I think Japan is
> > one of them.
>
> Japanese acceptance or non-acceptance of a standard is not a validation
> or invalidation of the standard.  Look at HDTV and Unicode.
>
> In this case, the Euro standards *are* superior, but that is not going
> to help the already commited switching systems in the US.  The issue
> is the wire protocol, and that's already set in concrete in the US.
>
> Using only adapters with the SGI chipset is one solution to the hardware
> compatability problem 9by moving it into software).
>
> The real answer is to disdain ISDN anyway: the reason for it is to
> allow metering charges by the Telco's, and that should be discouraged.
>-- End of excerpt from Terry Lambert

Disdain ? Sure. But Frame Relay 128K cost me $275 a month ;-(

Ulf.


-- 
Ulf Zimmermann, NCD Software, 101 Rowland Way, Suite 300, Novato, CA 94945
phone: 415-899-7941, email: ulf@z-code.ncd.com, phone-home: 510-865-0204
======================================
    FreeBSD 2.1.0 is available now!
--------------------------------------
FreeBSD: Turning PCs into Workstations
======================================




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?9602081233.ZM749>